diff mbox series

wifi: rtl8xxxu: 8188f: no need to initialize interrupts

Message ID ZEstRr5LwGqphsvi@ns.kevlo.org (mailing list archive)
State Superseded
Delegated to: Kalle Valo
Headers show
Series wifi: rtl8xxxu: 8188f: no need to initialize interrupts | expand

Commit Message

Kevin Lo April 28, 2023, 2:19 a.m. UTC 
There's no need to initialize interrupts for RTL8188FTV like the vendor driver.

Signed-off-by: Kevin Lo <kevlo@kevlo>
---
diff mbox series

Patch

diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
index 620a5cc2bfdd..7f620dc47ee0 100644
--- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
+++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c
@@ -4023,9 +4023,6 @@  static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 	if (priv->rtl_chip == RTL8192E) {
 		rtl8xxxu_write32(priv, REG_HIMR0, 0x00);
 		rtl8xxxu_write32(priv, REG_HIMR1, 0x00);
-	} else if (priv->rtl_chip == RTL8188F) {
-		rtl8xxxu_write32(priv, REG_HISR0, 0xffffffff);
-		rtl8xxxu_write32(priv, REG_HISR1, 0xffffffff);
 	} else if (priv->rtl_chip == RTL8188E) {
 		rtl8xxxu_write32(priv, REG_HISR0, 0xffffffff);
 		val32 = IMR0_PSTIMEOUT | IMR0_TBDER | IMR0_CPWM | IMR0_CPWM2;
@@ -4035,7 +4032,7 @@  static int rtl8xxxu_init_device(struct ieee80211_hw *hw)
 		val8 = rtl8xxxu_read8(priv, REG_USB_SPECIAL_OPTION);
 		val8 |= USB_SPEC_INT_BULK_SELECT;
 		rtl8xxxu_write8(priv, REG_USB_SPECIAL_OPTION, val8);
-	} else {
+	} else if (priv->rtl_chip != RTL8188F) {
 		/*
 		 * Enable all interrupts - not obvious USB needs to do this
 		 */