@@ -1125,7 +1125,7 @@ void mt7615_mac_set_rates(struct mt7615_phy *phy, struct mt7615_sta *sta,
idx = idx > HW_BSSID_MAX ? HW_BSSID_0 : idx;
addr = idx > 1 ? MT_LPON_TCR2(idx): MT_LPON_TCR0(idx);
- mt76_set(dev, addr, MT_LPON_TCR_MODE); /* TSF read */
+ mt76_rmw(dev, addr, MT_LPON_TCR_MODE, MT_LPON_TCR_READ); /* TSF read */
sta->rate_set_tsf = mt76_rr(dev, MT_LPON_UTTR0) & ~BIT(0);
sta->rate_set_tsf |= rd.rateset;
@@ -891,7 +891,8 @@ mt7615_get_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
mt7615_mutex_acquire(dev);
- mt76_set(dev, reg, MT_LPON_TCR_MODE); /* TSF read */
+ /* TSF read */
+ mt76_rmw(dev, reg, MT_LPON_TCR_MODE, MT_LPON_TCR_READ);
tsf.t32[0] = mt76_rr(dev, MT_LPON_UTTR0);
tsf.t32[1] = mt76_rr(dev, MT_LPON_UTTR1);
@@ -921,7 +922,33 @@ mt7615_set_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
mt76_wr(dev, MT_LPON_UTTR0, tsf.t32[0]);
mt76_wr(dev, MT_LPON_UTTR1, tsf.t32[1]);
/* TSF software overwrite */
- mt76_set(dev, reg, MT_LPON_TCR_WRITE);
+ mt76_rmw(dev, reg, MT_LPON_TCR_MODE, MT_LPON_TCR_WRITE);
+
+ mt7615_mutex_release(dev);
+}
+
+static void
+mt7615_offset_tsf(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+ s64 timestamp)
+{
+ struct mt7615_vif *mvif = (struct mt7615_vif *)vif->drv_priv;
+ struct mt7615_dev *dev = mt7615_hw_dev(hw);
+ union {
+ u64 t64;
+ u32 t32[2];
+ } tsf = { .t64 = timestamp, };
+ u16 idx = mvif->mt76.omac_idx;
+ u32 reg;
+
+ idx = idx > HW_BSSID_MAX ? HW_BSSID_0 : idx;
+ reg = idx > 1 ? MT_LPON_TCR2(idx): MT_LPON_TCR0(idx);
+
+ mt7615_mutex_acquire(dev);
+
+ mt76_wr(dev, MT_LPON_UTTR0, tsf.t32[0]);
+ mt76_wr(dev, MT_LPON_UTTR1, tsf.t32[1]);
+ /* TSF software adjust*/
+ mt76_rmw(dev, reg, MT_LPON_TCR_MODE, MT_LPON_TCR_ADJUST);
mt7615_mutex_release(dev);
}
@@ -1308,6 +1335,7 @@ const struct ieee80211_ops mt7615_ops = {
.get_stats = mt7615_get_stats,
.get_tsf = mt7615_get_tsf,
.set_tsf = mt7615_set_tsf,
+ .offset_tsf = mt7615_offset_tsf,
.get_survey = mt76_get_survey,
.get_antenna = mt76_get_antenna,
.set_antenna = mt7615_set_antenna,
@@ -463,7 +463,9 @@ enum mt7615_reg_base {
#define MT_LPON_TCR0(_n) MT_LPON(0x010 + ((_n) * 4))
#define MT_LPON_TCR2(_n) MT_LPON(0x0f8 + ((_n) - 2) * 4)
#define MT_LPON_TCR_MODE GENMASK(1, 0)
+#define MT_LPON_TCR_READ GENMASK(1, 0)
#define MT_LPON_TCR_WRITE BIT(0)
+#define MT_LPON_TCR_ADJUST BIT(1)
#define MT_LPON_UTTR0 MT_LPON(0x018)
#define MT_LPON_UTTR1 MT_LPON(0x01c)
@@ -123,7 +123,7 @@ static int mt7663_usb_sdio_set_rates(struct mt7615_dev *dev,
idx = idx > HW_BSSID_MAX ? HW_BSSID_0 : idx;
addr = idx > 1 ? MT_LPON_TCR2(idx): MT_LPON_TCR0(idx);
- mt76_set(dev, addr, MT_LPON_TCR_MODE); /* TSF read */
+ mt76_rmw(dev, addr, MT_LPON_TCR_MODE, MT_LPON_TCR_READ); /* TSF read */
val = mt76_rr(dev, MT_LPON_UTTR0);
sta->rate_set_tsf = (val & ~BIT(0)) | rate->rateset;
It's much more accurate than .get_tsf + .set_tsf and switch to use mt76_rmw to operate tsf registers. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> --- change since v2: fix mutex --- .../net/wireless/mediatek/mt76/mt7615/mac.c | 2 +- .../net/wireless/mediatek/mt76/mt7615/main.c | 32 +++++++++++++++++-- .../net/wireless/mediatek/mt76/mt7615/regs.h | 2 ++ .../wireless/mediatek/mt76/mt7615/usb_sdio.c | 2 +- 4 files changed, 34 insertions(+), 4 deletions(-)