@@ -87,8 +87,14 @@ static void mt7915_dma_config(struct mt7915_dev *dev)
MT7916_RXQ_BAND0);
RXQ_CONFIG(MT_RXQ_MCU_WA, WFDMA0, MT_INT_WED_RX_DONE_WA_MT7916,
MT7916_RXQ_MCU_WA);
- RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0, MT_INT_WED_RX_DONE_BAND1_MT7916,
- MT7916_RXQ_BAND1);
+ if (dev->hif2)
+ RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0,
+ MT_INT_RX_DONE_BAND1_MT7916,
+ MT7916_RXQ_BAND1);
+ else
+ RXQ_CONFIG(MT_RXQ_BAND1, WFDMA0,
+ MT_INT_WED_RX_DONE_BAND1_MT7916,
+ MT7916_RXQ_BAND1);
RXQ_CONFIG(MT_RXQ_MAIN_WA, WFDMA0, MT_INT_WED_RX_DONE_WA_MAIN_MT7916,
MT7916_RXQ_MCU_WA_MAIN);
TXQ_CONFIG(0, WFDMA0, MT_INT_WED_TX_DONE_BAND0,
@@ -2370,7 +2370,9 @@ int mt7915_mcu_init_firmware(struct mt7915_dev *dev)
if (ret)
return ret;
- if (mtk_wed_device_active(&dev->mt76.mmio.wed) && is_mt7915(&dev->mt76))
+ if ((mtk_wed_device_active(&dev->mt76.mmio.wed) &&
+ is_mt7915(&dev->mt76)) ||
+ !mtk_wed_get_rx_capa(&dev->mt76.mmio.wed))
mt7915_mcu_wa_cmd(dev, MCU_WA_PARAM_CMD(CAPABILITY), 0, 0, 0);
ret = mt7915_mcu_set_mwds(dev, 1);
@@ -989,13 +989,13 @@ irqreturn_t mt7915_irq_handler(int irq, void *dev_instance)
struct mt7915_dev *dev = dev_instance;
struct mtk_wed_device *wed = &dev->mt76.mmio.wed;
- if (mtk_wed_device_active(wed)) {
+ if (mtk_wed_device_active(wed))
mtk_wed_device_irq_set_mask(wed, 0);
- } else {
+ else
mt76_wr(dev, MT_INT_MASK_CSR, 0);
- if (dev->hif2)
- mt76_wr(dev, MT_INT1_MASK_CSR, 0);
- }
+
+ if (dev->hif2)
+ mt76_wr(dev, MT_INT1_MASK_CSR, 0);
if (!test_bit(MT76_STATE_INITIALIZED, &dev->mphy.state))
return IRQ_NONE;
Enable two PCIe interfaces (dev->hif2) support for mt7916 when WED is enabled. Signed-off-by: Sujuan Chen <sujuan.chen@mediatek.com> --- drivers/net/wireless/mediatek/mt76/mt7915/dma.c | 10 ++++++++-- drivers/net/wireless/mediatek/mt76/mt7915/mcu.c | 4 +++- drivers/net/wireless/mediatek/mt76/mt7915/mmio.c | 10 +++++----- 3 files changed, 16 insertions(+), 8 deletions(-)