@@ -680,11 +680,11 @@ static void query_phy_status(struct rtw_dev *rtwdev, u8 *phy_status,
}
static void
-rtw8821c_set_tx_power_index_by_rate(struct rtw_dev *rtwdev, u8 path, u8 rs)
+rtw8821c_set_tx_power_index_by_rate(struct rtw_dev *rtwdev, u8 path,
+ u8 rs, u32 *phy_pwr_idx)
{
struct rtw_hal *hal = &rtwdev->hal;
static const u32 offset_txagc[2] = {0x1d00, 0x1d80};
- static u32 phy_pwr_idx;
u8 rate, rate_idx, pwr_index, shift;
int j;
@@ -692,12 +692,12 @@ rtw8821c_set_tx_power_index_by_rate(struct rtw_dev *rtwdev, u8 path, u8 rs)
rate = rtw_rate_section[rs][j];
pwr_index = hal->tx_pwr_tbl[path][rate];
shift = rate & 0x3;
- phy_pwr_idx |= ((u32)pwr_index << (shift * 8));
+ *phy_pwr_idx |= ((u32)pwr_index << (shift * 8));
if (shift == 0x3 || rate == DESC_RATEVHT1SS_MCS9) {
rate_idx = rate & 0xfc;
rtw_write32(rtwdev, offset_txagc[path] + rate_idx,
- phy_pwr_idx);
- phy_pwr_idx = 0;
+ *phy_pwr_idx);
+ *phy_pwr_idx = 0;
}
}
}
@@ -705,6 +705,7 @@ rtw8821c_set_tx_power_index_by_rate(struct rtw_dev *rtwdev, u8 path, u8 rs)
static void rtw8821c_set_tx_power_index(struct rtw_dev *rtwdev)
{
struct rtw_hal *hal = &rtwdev->hal;
+ u32 phy_pwr_idx = 0;
int rs, path;
for (path = 0; path < hal->rf_path_num; path++) {
@@ -712,7 +713,8 @@ static void rtw8821c_set_tx_power_index(struct rtw_dev *rtwdev)
if (rs == RTW_RATE_SECTION_HT_2S ||
rs == RTW_RATE_SECTION_VHT_2S)
continue;
- rtw8821c_set_tx_power_index_by_rate(rtwdev, path, rs);
+ rtw8821c_set_tx_power_index_by_rate(rtwdev, path, rs,
+ &phy_pwr_idx);
}
}
}
Some users want to plug two identical USB devices at the same time. This static variable could theoretically cause them to use incorrect TX power values. Move the variable to the caller and pass a pointer to it to rtw8821c_set_tx_power_index_by_rate(). Signed-off-by: Bitterblue Smith <rtl8821cerfe2@gmail.com> --- drivers/net/wireless/realtek/rtw88/rtw8821c.c | 14 ++++++++------ 1 file changed, 8 insertions(+), 6 deletions(-)