diff mbox series

[v5.7,3/8] iwlwifi: pcie: indicate correct RB size to device

Message ID iwlwifi.20200403112332.e95201f80f1e.I0985c55223decf70182b9ef1d8edf4179f537853@changeid (mailing list archive)
State Superseded
Delegated to: Luca Coelho
Headers show
Series iwlwifi: fixes intended for v5.7 2020-04-03 | expand

Commit Message

Luca Coelho April 3, 2020, 8:29 a.m. UTC 
From: Johannes Berg <johannes.berg@intel.com>

In the context info, we need to indicate the correct RB size
to the device so that it will not think we have 4k when we
only use 2k. This seems to not have caused any issues right
now, likely because the hardware no longer supports putting
multiple entries into a single RB, and practically all of
the entries should be smaller than 2k.

Nevertheless, it's a bug, and we must advertise the right
size to the device.

Note that right now we can only tell it 2k vs. 4k, so for
the cases where we have more, still use 4k. This needs to
be fixed by the firmware first.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fixes: cfdc20efebdc ("iwlwifi: pcie: use partial pages if applicable")
Cc: stable@vger.kernel.org # v5.6
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
---
 .../intel/iwlwifi/pcie/ctxt-info-gen3.c        | 18 ++++++++++++++----
 1 file changed, 14 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c b/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c
index 01f248ba8fec..9d5b1e51b50d 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/ctxt-info-gen3.c
@@ -129,6 +129,18 @@  int iwl_pcie_ctxt_info_gen3_init(struct iwl_trans *trans,
 	int cmdq_size = max_t(u32, IWL_CMD_QUEUE_SIZE,
 			      trans->cfg->min_txq_size);
 
+	switch (trans_pcie->rx_buf_size) {
+	case IWL_AMSDU_DEF:
+		return -EINVAL;
+	case IWL_AMSDU_2K:
+		break;
+	case IWL_AMSDU_4K:
+	case IWL_AMSDU_8K:
+	case IWL_AMSDU_12K:
+		control_flags |= IWL_PRPH_SCRATCH_RB_SIZE_4K;
+		break;
+	}
+
 	/* Allocate prph scratch */
 	prph_scratch = dma_alloc_coherent(trans->dev, sizeof(*prph_scratch),
 					  &trans_pcie->prph_scratch_dma_addr,
@@ -143,10 +155,8 @@  int iwl_pcie_ctxt_info_gen3_init(struct iwl_trans *trans,
 		cpu_to_le16((u16)iwl_read32(trans, CSR_HW_REV));
 	prph_sc_ctrl->version.size = cpu_to_le16(sizeof(*prph_scratch) / 4);
 
-	control_flags = IWL_PRPH_SCRATCH_RB_SIZE_4K |
-			IWL_PRPH_SCRATCH_MTR_MODE |
-			(IWL_PRPH_MTR_FORMAT_256B &
-			 IWL_PRPH_SCRATCH_MTR_FORMAT);
+	control_flags |= IWL_PRPH_SCRATCH_MTR_MODE;
+	control_flags |= IWL_PRPH_MTR_FORMAT_256B & IWL_PRPH_SCRATCH_MTR_FORMAT;
 
 	/* initialize RX default queue */
 	prph_sc_ctrl->rbd_cfg.free_rbd_addr =