diff mbox series

[net,04/15] net/mlx5e: Don't change interrupt moderation params when DIM is enabled

Message ID 20210212025641.323844-5-saeed@kernel.org (mailing list archive)
State Accepted
Delegated to: Netdev Maintainers
Headers show
Series [net,01/15] net/mlx5e: E-switch, Fix rate calculation for overflow | expand

Checks

Context Check Description
netdev/cover_letter success Pull request
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net
netdev/subject_prefix success Link
netdev/cc_maintainers warning 4 maintainers not CCed: achiad@mellanox.com linux-rdma@vger.kernel.org gilr@mellanox.com leon@kernel.org
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch warning WARNING: line length of 91 exceeds 80 columns
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Saeed Mahameed Feb. 12, 2021, 2:56 a.m. UTC 
From: Maxim Mikityanskiy <maximmi@mellanox.com>

When mlx5e_ethtool_set_coalesce doesn't change DIM state
(enabled/disabled), it calls mlx5e_set_priv_channels_coalesce
unconditionally, which in turn invokes a firmware command to set
interrupt moderation parameters. It shouldn't happen while DIM manages
those parameters dynamically (it might even be happening at the same
time).

This patch fixes it by splitting mlx5e_set_priv_channels_coalesce into
two functions (for RX and TX) and calling them only when DIM is disabled
(for RX and TX respectively).

Fixes: cb3c7fd4f839 ("net/mlx5e: Support adaptive RX coalescing")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
---
 .../ethernet/mellanox/mlx5/core/en_ethtool.c   | 18 ++++++++++++++++--
 1 file changed, 16 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
index 302001d6661e..d7ff5fa45cb7 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en_ethtool.c
@@ -525,7 +525,7 @@  static int mlx5e_get_coalesce(struct net_device *netdev,
 #define MLX5E_MAX_COAL_FRAMES		MLX5_MAX_CQ_COUNT
 
 static void
-mlx5e_set_priv_channels_coalesce(struct mlx5e_priv *priv, struct ethtool_coalesce *coal)
+mlx5e_set_priv_channels_tx_coalesce(struct mlx5e_priv *priv, struct ethtool_coalesce *coal)
 {
 	struct mlx5_core_dev *mdev = priv->mdev;
 	int tc;
@@ -540,6 +540,17 @@  mlx5e_set_priv_channels_coalesce(struct mlx5e_priv *priv, struct ethtool_coalesc
 						coal->tx_coalesce_usecs,
 						coal->tx_max_coalesced_frames);
 		}
+	}
+}
+
+static void
+mlx5e_set_priv_channels_rx_coalesce(struct mlx5e_priv *priv, struct ethtool_coalesce *coal)
+{
+	struct mlx5_core_dev *mdev = priv->mdev;
+	int i;
+
+	for (i = 0; i < priv->channels.num; ++i) {
+		struct mlx5e_channel *c = priv->channels.c[i];
 
 		mlx5_core_modify_cq_moderation(mdev, &c->rq.cq.mcq,
 					       coal->rx_coalesce_usecs,
@@ -596,7 +607,10 @@  int mlx5e_ethtool_set_coalesce(struct mlx5e_priv *priv,
 	reset_tx = !!coal->use_adaptive_tx_coalesce != priv->channels.params.tx_dim_enabled;
 
 	if (!reset_rx && !reset_tx) {
-		mlx5e_set_priv_channels_coalesce(priv, coal);
+		if (!coal->use_adaptive_rx_coalesce)
+			mlx5e_set_priv_channels_rx_coalesce(priv, coal);
+		if (!coal->use_adaptive_tx_coalesce)
+			mlx5e_set_priv_channels_tx_coalesce(priv, coal);
 		priv->channels.params = new_channels.params;
 		goto out;
 	}