| Message ID | 20231120120642.54334-1-jtornosm@redhat.com (mailing list archive) |
|---|---|
| State | Accepted |
| Commit | 0739af07d1d947af27c877f797cb82ceee702515 |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [v2,1/2] net: usb: ax88179_178a: fix failed operations during ax88179_reset | expand |
Hello: This series was applied to netdev/net-next.git (main) by Jakub Kicinski <kuba@kernel.org>: On Mon, 20 Nov 2023 13:06:29 +0100 you wrote: > Using generic ASIX Electronics Corp. AX88179 Gigabit Ethernet device, > the following test cycle has been implemented: > - power on > - check logs > - shutdown > - after detecting the system shutdown, disconnect power > - after approximately 60 seconds of sleep, power is restored > Running some cycles, sometimes error logs like this appear: > kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0001: -19 > kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0001: -19 > ... > These failed operation are happening during ax88179_reset execution, so > the initialization could not be correct. > > [...] Here is the summary with links: - [v2,1/2] net: usb: ax88179_178a: fix failed operations during ax88179_reset (no matching commit) - [v2,2/2] net: usb: ax88179_178a: avoid two consecutive device resets https://git.kernel.org/netdev/net-next/c/d2689b6a86b9 You are awesome, thank you!
Hello: This series was applied to netdev/net.git (main) by Jakub Kicinski <kuba@kernel.org>: On Mon, 20 Nov 2023 13:06:29 +0100 you wrote: > Using generic ASIX Electronics Corp. AX88179 Gigabit Ethernet device, > the following test cycle has been implemented: > - power on > - check logs > - shutdown > - after detecting the system shutdown, disconnect power > - after approximately 60 seconds of sleep, power is restored > Running some cycles, sometimes error logs like this appear: > kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0001: -19 > kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0001: -19 > ... > These failed operation are happening during ax88179_reset execution, so > the initialization could not be correct. > > [...] Here is the summary with links: - [v2,1/2] net: usb: ax88179_178a: fix failed operations during ax88179_reset https://git.kernel.org/netdev/net/c/0739af07d1d9 - [v2,2/2] net: usb: ax88179_178a: avoid two consecutive device resets (no matching commit) You are awesome, thank you!
diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c index aff39bf3161d..4ea0e155bb0d 100644 --- a/drivers/net/usb/ax88179_178a.c +++ b/drivers/net/usb/ax88179_178a.c @@ -1583,11 +1583,11 @@ static int ax88179_reset(struct usbnet *dev) *tmp16 = AX_PHYPWR_RSTCTL_IPRL; ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_PHYPWR_RSTCTL, 2, 2, tmp16); - msleep(200); + msleep(500); *tmp = AX_CLK_SELECT_ACS | AX_CLK_SELECT_BCS; ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_CLK_SELECT, 1, 1, tmp); - msleep(100); + msleep(200); /* Ethernet PHY Auto Detach*/ ax88179_auto_detach(dev);
Using generic ASIX Electronics Corp. AX88179 Gigabit Ethernet device, the following test cycle has been implemented: - power on - check logs - shutdown - after detecting the system shutdown, disconnect power - after approximately 60 seconds of sleep, power is restored Running some cycles, sometimes error logs like this appear: kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to write reg index 0x0001: -19 kernel: ax88179_178a 2-9:1.0 (unnamed net_device) (uninitialized): Failed to read reg index 0x0001: -19 ... These failed operation are happening during ax88179_reset execution, so the initialization could not be correct. In order to avoid this, we need to increase the delay after reset and clock initial operations. By using these larger values, many cycles have been run and no failed operations appear. It would be better to check some status register to verify when the operation has finished, but I do not have found any available information (neither in the public datasheets nor in the manufacturer's driver). The only available information for the necessary delays is the maufacturer's driver (original values) but the proposed values are not enough for the tested devices. Fixes: e2ca90c276e1f ("ax88179_178a: ASIX AX88179_178A USB 3.0/2.0 to gigabit ethernet adapter driver") Reported-by: Herb Wei <weihao.bj@ieisystem.com> Tested-by: Herb Wei <weihao.bj@ieisystem.com> Signed-off-by: Jose Ignacio Tornos Martinez <jtornosm@redhat.com> --- V1 -> V2: - Add Fixes tag. - Comments about the available information and manufacturer's driver reference to complete why the new values are needed. drivers/net/usb/ax88179_178a.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)