Message ID | 20200806132106.747414-1-clg@kaod.org (mailing list archive) |
---|---|
Headers | show |
Series | aspeed: mostly cleanups and some extensions | expand |
On 8/6/20 3:20 PM, Cédric Le Goater wrote: > Hello, > > Various fixes improving the support of Aspeed machines. > > Thanks, > > C. > > Cédric Le Goater (16): > m25p80: Return the JEDEC ID twice for mx25l25635e > m25p80: Add support for mx25l25635f > m25p80: Add support for n25q512ax3 > aspeed/scu: Fix valid access size on AST2400 > aspeed/smc: Fix MemoryRegionOps definition > aspeed/smc: Fix max_slaves of the legacy SMC device > aspeed/sdhci: Fix reset sequence > ftgmac100: Fix registers that can be read > ftgmac100: Fix interrupt status "Packet transmitted on ethernet" > ftgmac100: Fix interrupt status "Packet moved to RX FIFO" > ftgmac100: Change interrupt status when a DMA error occurs > ftgmac100: Check for invalid len and address before doing a DMA > transfer > ftgmac100: Fix integer overflow in ftgmac100_do_tx() > ftgmac100: Improve software reset > aspeed/sdmc: Simplify calculation of RAM bits > aspeed/smc: Open AHB window of the second chip of the AST2600 FMC > controller > > Joel Stanley (2): > aspeed/sdmc: Perform memory training > aspeed/sdmc: Allow writes to unprotected registers > > erik-smit (1): > hw/arm/aspeed: Add board model for Supermicro X11 BMC Peter, I saw that you just merged that one. I did some minor changes in the commit log. Nothing very important. Thanks, C. > > include/hw/misc/aspeed_sdmc.h | 13 +++- > hw/arm/aspeed.c | 35 ++++++++++ > hw/block/m25p80.c | 4 +- > hw/misc/aspeed_scu.c | 9 +-- > hw/misc/aspeed_sdmc.c | 125 +++++++++++++++++++--------------- > hw/net/ftgmac100.c | 45 ++++++++---- > hw/sd/aspeed_sdhci.c | 10 ++- > hw/ssi/aspeed_smc.c | 6 +- > 8 files changed, 167 insertions(+), 80 deletions(-) >
On Thu, 6 Aug 2020 at 14:24, Cédric Le Goater <clg@kaod.org> wrote: > > On 8/6/20 3:20 PM, Cédric Le Goater wrote: > > Hello, > > > > Various fixes improving the support of Aspeed machines. > > > > Thanks, > > > > C. > > > > Cédric Le Goater (16): > > m25p80: Return the JEDEC ID twice for mx25l25635e > > m25p80: Add support for mx25l25635f > > m25p80: Add support for n25q512ax3 > > aspeed/scu: Fix valid access size on AST2400 > > aspeed/smc: Fix MemoryRegionOps definition > > aspeed/smc: Fix max_slaves of the legacy SMC device > > aspeed/sdhci: Fix reset sequence > > ftgmac100: Fix registers that can be read > > ftgmac100: Fix interrupt status "Packet transmitted on ethernet" > > ftgmac100: Fix interrupt status "Packet moved to RX FIFO" > > ftgmac100: Change interrupt status when a DMA error occurs > > ftgmac100: Check for invalid len and address before doing a DMA > > transfer > > ftgmac100: Fix integer overflow in ftgmac100_do_tx() > > ftgmac100: Improve software reset > > aspeed/sdmc: Simplify calculation of RAM bits > > aspeed/smc: Open AHB window of the second chip of the AST2600 FMC > > controller > > > > Joel Stanley (2): > > aspeed/sdmc: Perform memory training > > aspeed/sdmc: Allow writes to unprotected registers > > > > erik-smit (1): > > hw/arm/aspeed: Add board model for Supermicro X11 BMC > > Peter, > > I saw that you just merged that one. I did some minor changes in > the commit log. Nothing very important. OK, I'll drop the old version from target-arm.next. I'm wondering whether it would be simpler to let you just submit pullreqs for aspeed-specific patches, since we seem to have quite a lot of them and I'm generally letting you do the review work anyway. What do you think ? I'm happy to continue to take them in via target-arm.next if you prefer. thanks -- PMM