[v10,00/77] support vector extension v1.0

Message

Frank Chang Nov. 29, 2021, 3:02 a.m. UTC

From: Frank Chang <[e-mail]>

This patchset implements the vector extension v1.0 for RISC-V on QEMU.

RVV v1.0 spec is now fronzen for public review:
https://github.com/riscv/riscv-v-spec/releases/tag/v1.0

The port is available here:
https://github.com/sifive/qemu/tree/rvv-1.0-upstream-v10

RVV v1.0 can be enabled with -cpu option: v=true and specify vext_spec
option to v1.0 (i.e. vext_spec=v1.0)

Note: This patchset depends on other patchsets listed in Based-on
      section below so it is not able to be built unless those patchsets
      are applied.

Changelog:

v10
  * Add ELEN checks for widening and narrowing instructions.

v9
  * Remove explicitly set mstatus.SD patches as mstatus.SD is now
    set in add_status_sd().
  * Rebase on riscv-to-apply.next branch.

v8
  * Use {get,dest}_gpr APIs.
  * remove vector AMO instructions.
  * rename vpopc.m to vcpop.m.
  * rename vle1.v and vse1.v to vlm.v and vsm.v.
  * rename vmandnot.mm and vmornot.mm to vmandn.mm and vmorn.mm.

v7
  * remove hardcoded GDB vector registers list.
  * add vsetivli instruction.
  * add vle1.v and vse1.v instructions.

v6
  * add vector floating-point reciprocal estimate instruction.
  * add vector floating-point reciprocal square-root estimate instruction.
  * update check rules for segment register groups, each segment register
    group has to follow overlap rules.
  * update viota.m instruction check rules.

v5
  * refactor RVV v1.0 check functions.
    (Thanks to Richard Henderson's bitwise tricks.)
  * relax RV_VLEN_MAX to 1024-bits.
  * implement vstart CSR's behaviors.
  * trigger illegal instruction exception if frm is not valid for
    vector floating-point instructions.
  * rebase on riscv-to-apply.next.

v4
  * remove explicit float flmul variable in DisasContext.
  * replace floating-point calculations with shift operations to
    improve performance.
  * relax RV_VLEN_MAX to 512-bits.

v3
  * apply nan-box helpers from Richard Henderson.
  * remove fp16 api changes as they are sent independently in another
    pathcset by Chih-Min Chao.
  * remove all tail elements clear functions as tail elements can
    retain unchanged for either VTA set to undisturbed or agnostic.
  * add fp16 nan-box check generator function.
  * add floating-point rounding mode enum.
  * replace flmul arithmetic with shifts to avoid floating-point
    conversions.
  * add Zvqmac extension.
  * replace gdbstub vector register xml files with dynamic generator.
  * bumped to RVV v1.0.
  * RVV v1.0 related changes:
    * add vl<nf>re<eew>.v and vs<nf>r.v vector whole register
      load/store instructions
    * add vrgatherei16 instruction.
    * rearranged bits in vtype to make vlmul bits into a contiguous
      field.

v2
  * drop v0.7.1 support.
  * replace invisible return check macros with functions.
  * move mark_vs_dirty() to translators.
  * add SSTATUS_VS flag for s-mode.
  * nan-box scalar fp register for floating-point operations.
  * add gdbstub files for vector registers to allow system-mode
    debugging with GDB.

Based-on: <[e-mail]>
Based-on: <[e-mail]>

Frank Chang (72):
  target/riscv: drop vector 0.7.1 and add 1.0 support
  target/riscv: Use FIELD_EX32() to extract wd field
  target/riscv: rvv-1.0: set mstatus.SD bit if mstatus.VS is dirty
  target/riscv: rvv-1.0: introduce writable misa.v field
  target/riscv: rvv-1.0: add translation-time vector context status
  target/riscv: rvv-1.0: remove rvv related codes from fcsr registers
  target/riscv: rvv-1.0: check MSTATUS_VS when accessing vector csr
    registers
  target/riscv: rvv-1.0: remove MLEN calculations
  target/riscv: rvv-1.0: add fractional LMUL
  target/riscv: rvv-1.0: add VMA and VTA
  target/riscv: rvv-1.0: update check functions
  target/riscv: introduce more imm value modes in translator functions
  target/riscv: rvv:1.0: add translation-time nan-box helper function
  target/riscv: rvv-1.0: remove amo operations instructions
  target/riscv: rvv-1.0: configure instructions
  target/riscv: rvv-1.0: stride load and store instructions
  target/riscv: rvv-1.0: index load and store instructions
  target/riscv: rvv-1.0: fix address index overflow bug of indexed
    load/store insns
  target/riscv: rvv-1.0: fault-only-first unit stride load
  target/riscv: rvv-1.0: load/store whole register instructions
  target/riscv: rvv-1.0: update vext_max_elems() for load/store insns
  target/riscv: rvv-1.0: take fractional LMUL into vector max elements
    calculation
  target/riscv: rvv-1.0: floating-point square-root instruction
  target/riscv: rvv-1.0: floating-point classify instructions
  target/riscv: rvv-1.0: count population in mask instruction
  target/riscv: rvv-1.0: find-first-set mask bit instruction
  target/riscv: rvv-1.0: set-X-first mask bit instructions
  target/riscv: rvv-1.0: iota instruction
  target/riscv: rvv-1.0: element index instruction
  target/riscv: rvv-1.0: allow load element with sign-extended
  target/riscv: rvv-1.0: register gather instructions
  target/riscv: rvv-1.0: integer scalar move instructions
  target/riscv: rvv-1.0: floating-point move instruction
  target/riscv: rvv-1.0: floating-point scalar move instructions
  target/riscv: rvv-1.0: whole register move instructions
  target/riscv: rvv-1.0: integer extension instructions
  target/riscv: rvv-1.0: single-width averaging add and subtract
    instructions
  target/riscv: rvv-1.0: single-width bit shift instructions
  target/riscv: rvv-1.0: integer add-with-carry/subtract-with-borrow
  target/riscv: rvv-1.0: narrowing integer right shift instructions
  target/riscv: rvv-1.0: widening integer multiply-add instructions
  target/riscv: rvv-1.0: single-width saturating add and subtract
    instructions
  target/riscv: rvv-1.0: integer comparison instructions
  target/riscv: rvv-1.0: floating-point compare instructions
  target/riscv: rvv-1.0: mask-register logical instructions
  target/riscv: rvv-1.0: slide instructions
  target/riscv: rvv-1.0: floating-point slide instructions
  target/riscv: rvv-1.0: narrowing fixed-point clip instructions
  target/riscv: rvv-1.0: single-width floating-point reduction
  target/riscv: rvv-1.0: widening floating-point reduction instructions
  target/riscv: rvv-1.0: single-width scaling shift instructions
  target/riscv: rvv-1.0: remove widening saturating scaled multiply-add
  target/riscv: rvv-1.0: remove vmford.vv and vmford.vf
  target/riscv: rvv-1.0: remove integer extract instruction
  target/riscv: rvv-1.0: floating-point min/max instructions
  target/riscv: introduce floating-point rounding mode enum
  target/riscv: rvv-1.0: floating-point/integer type-convert
    instructions
  target/riscv: rvv-1.0: widening floating-point/integer type-convert
  target/riscv: add "set round to odd" rounding mode helper function
  target/riscv: rvv-1.0: narrowing floating-point/integer type-convert
  target/riscv: rvv-1.0: relax RV_VLEN_MAX to 1024-bits
  target/riscv: rvv-1.0: implement vstart CSR
  target/riscv: rvv-1.0: trigger illegal instruction exception if frm is
    not valid
  target/riscv: rvv-1.0: floating-point reciprocal square-root estimate
    instruction
  target/riscv: rvv-1.0: floating-point reciprocal estimate instruction
  target/riscv: rvv-1.0: rename r2_zimm to r2_zimm11
  target/riscv: rvv-1.0: add vsetivli instruction
  target/riscv: rvv-1.0: add evl parameter to vext_ldst_us()
  target/riscv: rvv-1.0: add vector unit-stride mask load/store insns
  target/riscv: rvv-1.0: rename vmandnot.mm and vmornot.mm to vmandn.mm
    and vmorn.mm
  target/riscv: rvv-1.0: update opivv_vadc_check() comment
  target/riscv: rvv-1.0: Add ELEN checks for widening and narrowing
    instructions

Greentime Hu (1):
  target/riscv: rvv-1.0: add vlenb register

Hsiangkai Wang (1):
  target/riscv: gdb: support vector registers for rv64 & rv32

LIU Zhiwei (3):
  target/riscv: rvv-1.0: add mstatus VS field
  target/riscv: rvv-1.0: add sstatus VS field
  target/riscv: rvv-1.0: add vcsr register

 target/riscv/cpu.c                      |   18 +-
 target/riscv/cpu.h                      |   61 +-
 target/riscv/cpu_bits.h                 |   10 +
 target/riscv/cpu_helper.c               |   39 +-
 target/riscv/csr.c                      |   63 +-
 target/riscv/fpu_helper.c               |   17 +-
 target/riscv/gdbstub.c                  |  184 ++
 target/riscv/helper.h                   |  435 ++-
 target/riscv/insn32.decode              |  294 +-
 target/riscv/insn_trans/trans_rvv.c.inc | 2429 +++++++++------
 target/riscv/internals.h                |   24 +-
 target/riscv/translate.c                |   73 +-
 target/riscv/vector_helper.c            | 3601 ++++++++++++-----------
 13 files changed, 4157 insertions(+), 3091 deletions(-)

--
2.25.1

Comments

Alistair Francis Dec. 8, 2021, 6:39 a.m. UTC | #1

On Mon, Nov 29, 2021 at 1:04 PM <[e-mail]> wrote:
>
> From: Frank Chang <[e-mail]>
>
> This patchset implements the vector extension v1.0 for RISC-V on QEMU.
>
> RVV v1.0 spec is now fronzen for public review:
> https://github.com/riscv/riscv-v-spec/releases/tag/v1.0
>
> The port is available here:
> https://github.com/sifive/qemu/tree/rvv-1.0-upstream-v10
>
> RVV v1.0 can be enabled with -cpu option: v=true and specify vext_spec
> option to v1.0 (i.e. vext_spec=v1.0)
>
> Note: This patchset depends on other patchsets listed in Based-on
>       section below so it is not able to be built unless those patchsets
>       are applied.

I think this is all reviewed now. Once your other patch sets are
merged just re-send this and I can apply it.

Alistair

>
> Changelog:
>
> v10
>   * Add ELEN checks for widening and narrowing instructions.
>
> v9
>   * Remove explicitly set mstatus.SD patches as mstatus.SD is now
>     set in add_status_sd().
>   * Rebase on riscv-to-apply.next branch.
>
> v8
>   * Use {get,dest}_gpr APIs.
>   * remove vector AMO instructions.
>   * rename vpopc.m to vcpop.m.
>   * rename vle1.v and vse1.v to vlm.v and vsm.v.
>   * rename vmandnot.mm and vmornot.mm to vmandn.mm and vmorn.mm.
>
> v7
>   * remove hardcoded GDB vector registers list.
>   * add vsetivli instruction.
>   * add vle1.v and vse1.v instructions.
>
> v6
>   * add vector floating-point reciprocal estimate instruction.
>   * add vector floating-point reciprocal square-root estimate instruction.
>   * update check rules for segment register groups, each segment register
>     group has to follow overlap rules.
>   * update viota.m instruction check rules.
>
> v5
>   * refactor RVV v1.0 check functions.
>     (Thanks to Richard Henderson's bitwise tricks.)
>   * relax RV_VLEN_MAX to 1024-bits.
>   * implement vstart CSR's behaviors.
>   * trigger illegal instruction exception if frm is not valid for
>     vector floating-point instructions.
>   * rebase on riscv-to-apply.next.
>
> v4
>   * remove explicit float flmul variable in DisasContext.
>   * replace floating-point calculations with shift operations to
>     improve performance.
>   * relax RV_VLEN_MAX to 512-bits.
>
> v3
>   * apply nan-box helpers from Richard Henderson.
>   * remove fp16 api changes as they are sent independently in another
>     pathcset by Chih-Min Chao.
>   * remove all tail elements clear functions as tail elements can
>     retain unchanged for either VTA set to undisturbed or agnostic.
>   * add fp16 nan-box check generator function.
>   * add floating-point rounding mode enum.
>   * replace flmul arithmetic with shifts to avoid floating-point
>     conversions.
>   * add Zvqmac extension.
>   * replace gdbstub vector register xml files with dynamic generator.
>   * bumped to RVV v1.0.
>   * RVV v1.0 related changes:
>     * add vl<nf>re<eew>.v and vs<nf>r.v vector whole register
>       load/store instructions
>     * add vrgatherei16 instruction.
>     * rearranged bits in vtype to make vlmul bits into a contiguous
>       field.
>
> v2
>   * drop v0.7.1 support.
>   * replace invisible return check macros with functions.
>   * move mark_vs_dirty() to translators.
>   * add SSTATUS_VS flag for s-mode.
>   * nan-box scalar fp register for floating-point operations.
>   * add gdbstub files for vector registers to allow system-mode
>     debugging with GDB.
>
> Based-on: <[e-mail]>
> Based-on: <[e-mail]>
>
> Frank Chang (72):
>   target/riscv: drop vector 0.7.1 and add 1.0 support
>   target/riscv: Use FIELD_EX32() to extract wd field
>   target/riscv: rvv-1.0: set mstatus.SD bit if mstatus.VS is dirty
>   target/riscv: rvv-1.0: introduce writable misa.v field
>   target/riscv: rvv-1.0: add translation-time vector context status
>   target/riscv: rvv-1.0: remove rvv related codes from fcsr registers
>   target/riscv: rvv-1.0: check MSTATUS_VS when accessing vector csr
>     registers
>   target/riscv: rvv-1.0: remove MLEN calculations
>   target/riscv: rvv-1.0: add fractional LMUL
>   target/riscv: rvv-1.0: add VMA and VTA
>   target/riscv: rvv-1.0: update check functions
>   target/riscv: introduce more imm value modes in translator functions
>   target/riscv: rvv:1.0: add translation-time nan-box helper function
>   target/riscv: rvv-1.0: remove amo operations instructions
>   target/riscv: rvv-1.0: configure instructions
>   target/riscv: rvv-1.0: stride load and store instructions
>   target/riscv: rvv-1.0: index load and store instructions
>   target/riscv: rvv-1.0: fix address index overflow bug of indexed
>     load/store insns
>   target/riscv: rvv-1.0: fault-only-first unit stride load
>   target/riscv: rvv-1.0: load/store whole register instructions
>   target/riscv: rvv-1.0: update vext_max_elems() for load/store insns
>   target/riscv: rvv-1.0: take fractional LMUL into vector max elements
>     calculation
>   target/riscv: rvv-1.0: floating-point square-root instruction
>   target/riscv: rvv-1.0: floating-point classify instructions
>   target/riscv: rvv-1.0: count population in mask instruction
>   target/riscv: rvv-1.0: find-first-set mask bit instruction
>   target/riscv: rvv-1.0: set-X-first mask bit instructions
>   target/riscv: rvv-1.0: iota instruction
>   target/riscv: rvv-1.0: element index instruction
>   target/riscv: rvv-1.0: allow load element with sign-extended
>   target/riscv: rvv-1.0: register gather instructions
>   target/riscv: rvv-1.0: integer scalar move instructions
>   target/riscv: rvv-1.0: floating-point move instruction
>   target/riscv: rvv-1.0: floating-point scalar move instructions
>   target/riscv: rvv-1.0: whole register move instructions
>   target/riscv: rvv-1.0: integer extension instructions
>   target/riscv: rvv-1.0: single-width averaging add and subtract
>     instructions
>   target/riscv: rvv-1.0: single-width bit shift instructions
>   target/riscv: rvv-1.0: integer add-with-carry/subtract-with-borrow
>   target/riscv: rvv-1.0: narrowing integer right shift instructions
>   target/riscv: rvv-1.0: widening integer multiply-add instructions
>   target/riscv: rvv-1.0: single-width saturating add and subtract
>     instructions
>   target/riscv: rvv-1.0: integer comparison instructions
>   target/riscv: rvv-1.0: floating-point compare instructions
>   target/riscv: rvv-1.0: mask-register logical instructions
>   target/riscv: rvv-1.0: slide instructions
>   target/riscv: rvv-1.0: floating-point slide instructions
>   target/riscv: rvv-1.0: narrowing fixed-point clip instructions
>   target/riscv: rvv-1.0: single-width floating-point reduction
>   target/riscv: rvv-1.0: widening floating-point reduction instructions
>   target/riscv: rvv-1.0: single-width scaling shift instructions
>   target/riscv: rvv-1.0: remove widening saturating scaled multiply-add
>   target/riscv: rvv-1.0: remove vmford.vv and vmford.vf
>   target/riscv: rvv-1.0: remove integer extract instruction
>   target/riscv: rvv-1.0: floating-point min/max instructions
>   target/riscv: introduce floating-point rounding mode enum
>   target/riscv: rvv-1.0: floating-point/integer type-convert
>     instructions
>   target/riscv: rvv-1.0: widening floating-point/integer type-convert
>   target/riscv: add "set round to odd" rounding mode helper function
>   target/riscv: rvv-1.0: narrowing floating-point/integer type-convert
>   target/riscv: rvv-1.0: relax RV_VLEN_MAX to 1024-bits
>   target/riscv: rvv-1.0: implement vstart CSR
>   target/riscv: rvv-1.0: trigger illegal instruction exception if frm is
>     not valid
>   target/riscv: rvv-1.0: floating-point reciprocal square-root estimate
>     instruction
>   target/riscv: rvv-1.0: floating-point reciprocal estimate instruction
>   target/riscv: rvv-1.0: rename r2_zimm to r2_zimm11
>   target/riscv: rvv-1.0: add vsetivli instruction
>   target/riscv: rvv-1.0: add evl parameter to vext_ldst_us()
>   target/riscv: rvv-1.0: add vector unit-stride mask load/store insns
>   target/riscv: rvv-1.0: rename vmandnot.mm and vmornot.mm to vmandn.mm
>     and vmorn.mm
>   target/riscv: rvv-1.0: update opivv_vadc_check() comment
>   target/riscv: rvv-1.0: Add ELEN checks for widening and narrowing
>     instructions
>
> Greentime Hu (1):
>   target/riscv: rvv-1.0: add vlenb register
>
> Hsiangkai Wang (1):
>   target/riscv: gdb: support vector registers for rv64 & rv32
>
> LIU Zhiwei (3):
>   target/riscv: rvv-1.0: add mstatus VS field
>   target/riscv: rvv-1.0: add sstatus VS field
>   target/riscv: rvv-1.0: add vcsr register
>
>  target/riscv/cpu.c                      |   18 +-
>  target/riscv/cpu.h                      |   61 +-
>  target/riscv/cpu_bits.h                 |   10 +
>  target/riscv/cpu_helper.c               |   39 +-
>  target/riscv/csr.c                      |   63 +-
>  target/riscv/fpu_helper.c               |   17 +-
>  target/riscv/gdbstub.c                  |  184 ++
>  target/riscv/helper.h                   |  435 ++-
>  target/riscv/insn32.decode              |  294 +-
>  target/riscv/insn_trans/trans_rvv.c.inc | 2429 +++++++++------
>  target/riscv/internals.h                |   24 +-
>  target/riscv/translate.c                |   73 +-
>  target/riscv/vector_helper.c            | 3601 ++++++++++++-----------
>  13 files changed, 4157 insertions(+), 3091 deletions(-)
>
> --
> 2.25.1
>
>

Frank Chang Dec. 10, 2021, 7:35 a.m. UTC | #2

On Wed, Dec 8, 2021 at 2:40 PM Alistair Francis <[e-mail]>
wrote:

> On Mon, Nov 29, 2021 at 1:04 PM <[e-mail]> wrote:
> >
> > From: Frank Chang <[e-mail]>
> >
> > This patchset implements the vector extension v1.0 for RISC-V on QEMU.
> >
> > RVV v1.0 spec is now fronzen for public review:
> > https://github.com/riscv/riscv-v-spec/releases/tag/v1.0
> >
> > The port is available here:
> > https://github.com/sifive/qemu/tree/rvv-1.0-upstream-v10
> >
> > RVV v1.0 can be enabled with -cpu option: v=true and specify vext_spec
> > option to v1.0 (i.e. vext_spec=v1.0)
> >
> > Note: This patchset depends on other patchsets listed in Based-on
> >       section below so it is not able to be built unless those patchsets
> >       are applied.
>
> I think this is all reviewed now. Once your other patch sets are
> merged just re-send this and I can apply it.
>
> Alistair
>

Hi Alistair,

Thanks for the review.
I think <[e-mail]> has already been
applied to your riscv-to-apply.next branch.
I'll rebase <[e-mail]> and also this
patchset as well then resend them.

Regards,
Frank Chang


>
> >
> > Changelog:
> >
> > v10
> >   * Add ELEN checks for widening and narrowing instructions.
> >
> > v9
> >   * Remove explicitly set mstatus.SD patches as mstatus.SD is now
> >     set in add_status_sd().
> >   * Rebase on riscv-to-apply.next branch.
> >
> > v8
> >   * Use {get,dest}_gpr APIs.
> >   * remove vector AMO instructions.
> >   * rename vpopc.m to vcpop.m.
> >   * rename vle1.v and vse1.v to vlm.v and vsm.v.
> >   * rename vmandnot.mm and vmornot.mm to vmandn.mm and vmorn.mm.
> >
> > v7
> >   * remove hardcoded GDB vector registers list.
> >   * add vsetivli instruction.
> >   * add vle1.v and vse1.v instructions.
> >
> > v6
> >   * add vector floating-point reciprocal estimate instruction.
> >   * add vector floating-point reciprocal square-root estimate
> instruction.
> >   * update check rules for segment register groups, each segment register
> >     group has to follow overlap rules.
> >   * update viota.m instruction check rules.
> >
> > v5
> >   * refactor RVV v1.0 check functions.
> >     (Thanks to Richard Henderson's bitwise tricks.)
> >   * relax RV_VLEN_MAX to 1024-bits.
> >   * implement vstart CSR's behaviors.
> >   * trigger illegal instruction exception if frm is not valid for
> >     vector floating-point instructions.
> >   * rebase on riscv-to-apply.next.
> >
> > v4
> >   * remove explicit float flmul variable in DisasContext.
> >   * replace floating-point calculations with shift operations to
> >     improve performance.
> >   * relax RV_VLEN_MAX to 512-bits.
> >
> > v3
> >   * apply nan-box helpers from Richard Henderson.
> >   * remove fp16 api changes as they are sent independently in another
> >     pathcset by Chih-Min Chao.
> >   * remove all tail elements clear functions as tail elements can
> >     retain unchanged for either VTA set to undisturbed or agnostic.
> >   * add fp16 nan-box check generator function.
> >   * add floating-point rounding mode enum.
> >   * replace flmul arithmetic with shifts to avoid floating-point
> >     conversions.
> >   * add Zvqmac extension.
> >   * replace gdbstub vector register xml files with dynamic generator.
> >   * bumped to RVV v1.0.
> >   * RVV v1.0 related changes:
> >     * add vl<nf>re<eew>.v and vs<nf>r.v vector whole register
> >       load/store instructions
> >     * add vrgatherei16 instruction.
> >     * rearranged bits in vtype to make vlmul bits into a contiguous
> >       field.
> >
> > v2
> >   * drop v0.7.1 support.
> >   * replace invisible return check macros with functions.
> >   * move mark_vs_dirty() to translators.
> >   * add SSTATUS_VS flag for s-mode.
> >   * nan-box scalar fp register for floating-point operations.
> >   * add gdbstub files for vector registers to allow system-mode
> >     debugging with GDB.
> >
> > Based-on: <[e-mail]>
> > Based-on: <[e-mail]>
> >
> > Frank Chang (72):
> >   target/riscv: drop vector 0.7.1 and add 1.0 support
> >   target/riscv: Use FIELD_EX32() to extract wd field
> >   target/riscv: rvv-1.0: set mstatus.SD bit if mstatus.VS is dirty
> >   target/riscv: rvv-1.0: introduce writable misa.v field
> >   target/riscv: rvv-1.0: add translation-time vector context status
> >   target/riscv: rvv-1.0: remove rvv related codes from fcsr registers
> >   target/riscv: rvv-1.0: check MSTATUS_VS when accessing vector csr
> >     registers
> >   target/riscv: rvv-1.0: remove MLEN calculations
> >   target/riscv: rvv-1.0: add fractional LMUL
> >   target/riscv: rvv-1.0: add VMA and VTA
> >   target/riscv: rvv-1.0: update check functions
> >   target/riscv: introduce more imm value modes in translator functions
> >   target/riscv: rvv:1.0: add translation-time nan-box helper function
> >   target/riscv: rvv-1.0: remove amo operations instructions
> >   target/riscv: rvv-1.0: configure instructions
> >   target/riscv: rvv-1.0: stride load and store instructions
> >   target/riscv: rvv-1.0: index load and store instructions
> >   target/riscv: rvv-1.0: fix address index overflow bug of indexed
> >     load/store insns
> >   target/riscv: rvv-1.0: fault-only-first unit stride load
> >   target/riscv: rvv-1.0: load/store whole register instructions
> >   target/riscv: rvv-1.0: update vext_max_elems() for load/store insns
> >   target/riscv: rvv-1.0: take fractional LMUL into vector max elements
> >     calculation
> >   target/riscv: rvv-1.0: floating-point square-root instruction
> >   target/riscv: rvv-1.0: floating-point classify instructions
> >   target/riscv: rvv-1.0: count population in mask instruction
> >   target/riscv: rvv-1.0: find-first-set mask bit instruction
> >   target/riscv: rvv-1.0: set-X-first mask bit instructions
> >   target/riscv: rvv-1.0: iota instruction
> >   target/riscv: rvv-1.0: element index instruction
> >   target/riscv: rvv-1.0: allow load element with sign-extended
> >   target/riscv: rvv-1.0: register gather instructions
> >   target/riscv: rvv-1.0: integer scalar move instructions
> >   target/riscv: rvv-1.0: floating-point move instruction
> >   target/riscv: rvv-1.0: floating-point scalar move instructions
> >   target/riscv: rvv-1.0: whole register move instructions
> >   target/riscv: rvv-1.0: integer extension instructions
> >   target/riscv: rvv-1.0: single-width averaging add and subtract
> >     instructions
> >   target/riscv: rvv-1.0: single-width bit shift instructions
> >   target/riscv: rvv-1.0: integer add-with-carry/subtract-with-borrow
> >   target/riscv: rvv-1.0: narrowing integer right shift instructions
> >   target/riscv: rvv-1.0: widening integer multiply-add instructions
> >   target/riscv: rvv-1.0: single-width saturating add and subtract
> >     instructions
> >   target/riscv: rvv-1.0: integer comparison instructions
> >   target/riscv: rvv-1.0: floating-point compare instructions
> >   target/riscv: rvv-1.0: mask-register logical instructions
> >   target/riscv: rvv-1.0: slide instructions
> >   target/riscv: rvv-1.0: floating-point slide instructions
> >   target/riscv: rvv-1.0: narrowing fixed-point clip instructions
> >   target/riscv: rvv-1.0: single-width floating-point reduction
> >   target/riscv: rvv-1.0: widening floating-point reduction instructions
> >   target/riscv: rvv-1.0: single-width scaling shift instructions
> >   target/riscv: rvv-1.0: remove widening saturating scaled multiply-add
> >   target/riscv: rvv-1.0: remove vmford.vv and vmford.vf
> >   target/riscv: rvv-1.0: remove integer extract instruction
> >   target/riscv: rvv-1.0: floating-point min/max instructions
> >   target/riscv: introduce floating-point rounding mode enum
> >   target/riscv: rvv-1.0: floating-point/integer type-convert
> >     instructions
> >   target/riscv: rvv-1.0: widening floating-point/integer type-convert
> >   target/riscv: add "set round to odd" rounding mode helper function
> >   target/riscv: rvv-1.0: narrowing floating-point/integer type-convert
> >   target/riscv: rvv-1.0: relax RV_VLEN_MAX to 1024-bits
> >   target/riscv: rvv-1.0: implement vstart CSR
> >   target/riscv: rvv-1.0: trigger illegal instruction exception if frm is
> >     not valid
> >   target/riscv: rvv-1.0: floating-point reciprocal square-root estimate
> >     instruction
> >   target/riscv: rvv-1.0: floating-point reciprocal estimate instruction
> >   target/riscv: rvv-1.0: rename r2_zimm to r2_zimm11
> >   target/riscv: rvv-1.0: add vsetivli instruction
> >   target/riscv: rvv-1.0: add evl parameter to vext_ldst_us()
> >   target/riscv: rvv-1.0: add vector unit-stride mask load/store insns
> >   target/riscv: rvv-1.0: rename vmandnot.mm and vmornot.mm to vmandn.mm
> >     and vmorn.mm
> >   target/riscv: rvv-1.0: update opivv_vadc_check() comment
> >   target/riscv: rvv-1.0: Add ELEN checks for widening and narrowing
> >     instructions
> >
> > Greentime Hu (1):
> >   target/riscv: rvv-1.0: add vlenb register
> >
> > Hsiangkai Wang (1):
> >   target/riscv: gdb: support vector registers for rv64 & rv32
> >
> > LIU Zhiwei (3):
> >   target/riscv: rvv-1.0: add mstatus VS field
> >   target/riscv: rvv-1.0: add sstatus VS field
> >   target/riscv: rvv-1.0: add vcsr register
> >
> >  target/riscv/cpu.c                      |   18 +-
> >  target/riscv/cpu.h                      |   61 +-
> >  target/riscv/cpu_bits.h                 |   10 +
> >  target/riscv/cpu_helper.c               |   39 +-
> >  target/riscv/csr.c                      |   63 +-
> >  target/riscv/fpu_helper.c               |   17 +-
> >  target/riscv/gdbstub.c                  |  184 ++
> >  target/riscv/helper.h                   |  435 ++-
> >  target/riscv/insn32.decode              |  294 +-
> >  target/riscv/insn_trans/trans_rvv.c.inc | 2429 +++++++++------
> >  target/riscv/internals.h                |   24 +-
> >  target/riscv/translate.c                |   73 +-
> >  target/riscv/vector_helper.c            | 3601 ++++++++++++-----------
> >  13 files changed, 4157 insertions(+), 3091 deletions(-)
> >
> > --
> > 2.25.1
> >
> >
>