@@ -764,6 +764,12 @@ static void arm_cpu_finalizefn(Object *obj)
QLIST_REMOVE(hook, node);
g_free(hook);
}
+#ifndef CONFIG_USER_ONLY
+ if (arm_feature(&cpu->env, ARM_FEATURE_PMU)) {
+ timer_deinit(cpu->pmu_timer);
+ timer_free(cpu->pmu_timer);
+ }
+#endif
}
static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
@@ -958,6 +964,11 @@ static void arm_cpu_realizefn(DeviceState *dev, Error **errp)
arm_register_pre_el_change_hook(cpu, &pmu_pre_el_change, 0);
arm_register_el_change_hook(cpu, &pmu_post_el_change, 0);
}
+
+#ifndef CONFIG_USER_ONLY
+ cpu->pmu_timer = timer_new_ns(QEMU_CLOCK_VIRTUAL, arm_pmu_timer_cb,
+ cpu);
+#endif
} else {
cpu->pmceid0 = 0x00000000;
cpu->pmceid1 = 0x00000000;
@@ -721,6 +721,8 @@ struct ARMCPU {
/* Timers used by the generic (architected) timer */
QEMUTimer *gt_timer[NUM_GTIMERS];
+ /* Timer used by the PMU */
+ QEMUTimer *pmu_timer;
/* GPIO outputs for generic timer */
qemu_irq gt_timer_outputs[NUM_GTIMERS];
/* GPIO output for GICv3 maintenance interrupt signal */
@@ -972,6 +974,11 @@ void pmccntr_op_finish(CPUARMState *env);
void pmu_op_start(CPUARMState *env);
void pmu_op_finish(CPUARMState *env);
+/**
+ * Called when a PMU counter is due to overflow
+ */
+void arm_pmu_timer_cb(void *opaque);
+
/**
* Functions to register as EL change hooks for PMU mode filtering
*/
@@ -944,6 +944,7 @@ static const ARMCPRegInfo v6_cp_reginfo[] = {
/* Definitions for the PMU registers */
#define PMCRN_MASK 0xf800
#define PMCRN_SHIFT 11
+#define PMCRLC 0x40
#define PMCRDP 0x10
#define PMCRD 0x8
#define PMCRC 0x4
@@ -963,6 +964,8 @@ static const ARMCPRegInfo v6_cp_reginfo[] = {
PMXEVTYPER_M | PMXEVTYPER_MT | \
PMXEVTYPER_EVTCOUNT)
+#define PMEVCNTR_OVERFLOW_MASK ((uint64_t)1 << 31)
+
#define PMCCFILTR 0xf8000000
#define PMCCFILTR_M PMXEVTYPER_M
#define PMCCFILTR_EL0 (PMCCFILTR | PMCCFILTR_M)
@@ -987,6 +990,11 @@ typedef struct pm_event {
* counters hold a difference from the return value from this function
*/
uint64_t (*get_count)(CPUARMState *);
+ /* Return how many nanoseconds it will take (at a minimum) for count events
+ * to occur. A negative value indicates the counter will never overflow, or
+ * that the counter has otherwise arranged for the overflow bit to be set
+ * and the PMU interrupt to be raised on overflow. */
+ int64_t (*ns_per_count)(uint64_t);
} pm_event;
static bool event_always_supported(CPUARMState *env)
@@ -1003,6 +1011,11 @@ static uint64_t swinc_get_count(CPUARMState *env)
return 0;
}
+static int64_t swinc_ns_per(uint64_t ignored)
+{
+ return -1;
+}
+
/*
* Return the underlying cycle count for the PMU cycle counters. If we're in
* usermode, simply return 0.
@@ -1018,6 +1031,11 @@ static uint64_t cycles_get_count(CPUARMState *env)
}
#ifndef CONFIG_USER_ONLY
+static int64_t cycles_ns_per(uint64_t cycles)
+{
+ return (ARM_CPU_FREQ / NANOSECONDS_PER_SECOND) * cycles;
+}
+
static bool instructions_supported(CPUARMState *env)
{
return use_icount == 1 /* Precise instruction counting */;
@@ -1027,21 +1045,29 @@ static uint64_t instructions_get_count(CPUARMState *env)
{
return (uint64_t)cpu_get_icount_raw();
}
+
+static int64_t instructions_ns_per(uint64_t icount)
+{
+ return cpu_icount_to_ns((int64_t)icount);
+}
#endif
static const pm_event pm_events[] = {
{ .number = 0x000, /* SW_INCR */
.supported = event_always_supported,
.get_count = swinc_get_count,
+ .ns_per_count = swinc_ns_per,
},
#ifndef CONFIG_USER_ONLY
{ .number = 0x008, /* INST_RETIRED, Instruction architecturally executed */
.supported = instructions_supported,
.get_count = instructions_get_count,
+ .ns_per_count = instructions_ns_per,
},
{ .number = 0x011, /* CPU_CYCLES, Cycle */
.supported = event_always_supported,
.get_count = cycles_get_count,
+ .ns_per_count = cycles_ns_per,
}
#endif
};
@@ -1240,6 +1266,13 @@ static inline bool pmu_counter_enabled(CPUARMState *env, uint8_t counter)
return enabled && !prohibited && !filtered;
}
+static void pmu_update_irq(CPUARMState *env)
+{
+ ARMCPU *cpu = arm_env_get_cpu(env);
+ qemu_set_irq(cpu->pmu_interrupt, (env->cp15.c9_pmcr & PMCRE) &&
+ (env->cp15.c9_pminten & env->cp15.c9_pmovsr));
+}
+
/*
* Ensure c15_ccnt is the guest-visible count so that operations such as
* enabling/disabling the counter or filtering, modifying the count itself,
@@ -1257,7 +1290,18 @@ void pmccntr_op_start(CPUARMState *env)
eff_cycles /= 64;
}
- env->cp15.c15_ccnt = eff_cycles - env->cp15.c15_ccnt_delta;
+ uint64_t new_pmccntr = eff_cycles - env->cp15.c15_ccnt_delta;
+
+ unsigned int overflow_bit = (env->cp15.c9_pmcr & PMCRLC) ? 63 : 31;
+ uint64_t overflow_mask = (uint64_t)1 << overflow_bit;
+ if (!(new_pmccntr & overflow_mask) &&
+ (env->cp15.c15_ccnt & overflow_mask)) {
+ env->cp15.c9_pmovsr |= (1 << 31);
+ new_pmccntr &= ~overflow_mask;
+ pmu_update_irq(env);
+ }
+
+ env->cp15.c15_ccnt = new_pmccntr;
}
env->cp15.c15_ccnt_delta = cycles;
}
@@ -1270,13 +1314,28 @@ void pmccntr_op_start(CPUARMState *env)
void pmccntr_op_finish(CPUARMState *env)
{
if (pmu_counter_enabled(env, 31)) {
- uint64_t prev_cycles = env->cp15.c15_ccnt_delta;
+#ifndef CONFIG_USER_ONLY
+ uint64_t delta;
+ if (env->cp15.c9_pmcr & PMCRLC) {
+ delta = UINT64_MAX - env->cp15.c15_ccnt + 1;
+ } else {
+ delta = UINT32_MAX - (uint32_t)env->cp15.c15_ccnt + 1;
+ }
+ int64_t overflow_in = cycles_ns_per(delta);
+
+ if (overflow_in > 0) {
+ int64_t overflow_at = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
+ overflow_in;
+ ARMCPU *cpu = arm_env_get_cpu(env);
+ timer_mod_anticipate_ns(cpu->pmu_timer, overflow_at);
+ }
+#endif
+ uint64_t prev_cycles = env->cp15.c15_ccnt_delta;
if (env->cp15.c9_pmcr & PMCRD) {
/* Increment once every 64 processor clock cycles */
prev_cycles /= 64;
}
-
env->cp15.c15_ccnt_delta = prev_cycles - env->cp15.c15_ccnt;
}
}
@@ -1292,8 +1351,15 @@ static void pmevcntr_op_start(CPUARMState *env, uint8_t counter)
}
if (pmu_counter_enabled(env, counter)) {
- env->cp15.c14_pmevcntr[counter] =
- count - env->cp15.c14_pmevcntr_delta[counter];
+ uint64_t new_pmevcntr = count - env->cp15.c14_pmevcntr_delta[counter];
+
+ if (!(new_pmevcntr & PMEVCNTR_OVERFLOW_MASK) &&
+ (env->cp15.c14_pmevcntr[counter] & PMEVCNTR_OVERFLOW_MASK)) {
+ env->cp15.c9_pmovsr |= (1 << counter);
+ new_pmevcntr &= ~PMEVCNTR_OVERFLOW_MASK;
+ pmu_update_irq(env);
+ }
+ env->cp15.c14_pmevcntr[counter] = new_pmevcntr;
}
env->cp15.c14_pmevcntr_delta[counter] = count;
}
@@ -1301,6 +1367,21 @@ static void pmevcntr_op_start(CPUARMState *env, uint8_t counter)
static void pmevcntr_op_finish(CPUARMState *env, uint8_t counter)
{
if (pmu_counter_enabled(env, counter)) {
+#ifndef CONFIG_USER_ONLY
+ uint16_t event = env->cp15.c14_pmevtyper[counter] & PMXEVTYPER_EVTCOUNT;
+ uint16_t event_idx = supported_event_map[event];
+ uint64_t delta = UINT32_MAX -
+ (uint32_t)env->cp15.c14_pmevcntr[counter] + 1;
+ int64_t overflow_in = pm_events[event_idx].ns_per_count(delta);
+
+ if (overflow_in > 0) {
+ int64_t overflow_at = qemu_clock_get_ns(QEMU_CLOCK_VIRTUAL) +
+ overflow_in;
+ ARMCPU *cpu = arm_env_get_cpu(env);
+ timer_mod_anticipate_ns(cpu->pmu_timer, overflow_at);
+ }
+#endif
+
env->cp15.c14_pmevcntr_delta[counter] -=
env->cp15.c14_pmevcntr[counter];
}
@@ -1334,6 +1415,19 @@ void pmu_post_el_change(ARMCPU *cpu, void *ignored)
pmu_op_finish(&cpu->env);
}
+void arm_pmu_timer_cb(void *opaque)
+{
+ ARMCPU *cpu = opaque;
+
+ /* Update all the counter values based on the current underlying counts,
+ * triggering interrupts to be raised, if necessary. pmu_op_finish() also
+ * has the effect of setting the cpu->pmu_timer to the next earliest time a
+ * counter may expire.
+ */
+ pmu_op_start(&cpu->env);
+ pmu_op_finish(&cpu->env);
+}
+
static void pmcr_write(CPUARMState *env, const ARMCPRegInfo *ri,
uint64_t value)
{
@@ -1370,7 +1464,21 @@ static void pmswinc_write(CPUARMState *env, const ARMCPRegInfo *ri,
/* counter is SW_INCR */
(env->cp15.c14_pmevtyper[i] & PMXEVTYPER_EVTCOUNT) == 0x0) {
pmevcntr_op_start(env, i);
- env->cp15.c14_pmevcntr[i]++;
+
+ /* Detect if this write causes an overflow since we can't predict
+ * PMSWINC overflows like we can for other events
+ */
+ uint64_t new_pmswinc = env->cp15.c14_pmevcntr[i] + 1;
+
+ if (!(new_pmswinc & PMEVCNTR_OVERFLOW_MASK) &&
+ (env->cp15.c14_pmevcntr[i] & PMEVCNTR_OVERFLOW_MASK)) {
+ env->cp15.c9_pmovsr |= (1 << i);
+ new_pmswinc &= ~PMEVCNTR_OVERFLOW_MASK;
+ pmu_update_irq(env);
+ }
+
+ env->cp15.c14_pmevcntr[i] = new_pmswinc;
+
pmevcntr_op_finish(env, i);
}
}
@@ -1441,6 +1549,7 @@ static void pmcntenset_write(CPUARMState *env, const ARMCPRegInfo *ri,
{
value &= pmu_counter_mask(env);
env->cp15.c9_pmcnten |= value;
+ pmu_update_irq(env);
}
static void pmcntenclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -1448,6 +1557,7 @@ static void pmcntenclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
{
value &= pmu_counter_mask(env);
env->cp15.c9_pmcnten &= ~value;
+ pmu_update_irq(env);
}
static void pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -1455,6 +1565,7 @@ static void pmovsr_write(CPUARMState *env, const ARMCPRegInfo *ri,
{
value &= pmu_counter_mask(env);
env->cp15.c9_pmovsr &= ~value;
+ pmu_update_irq(env);
}
static void pmovsset_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -1462,6 +1573,7 @@ static void pmovsset_write(CPUARMState *env, const ARMCPRegInfo *ri,
{
value &= pmu_counter_mask(env);
env->cp15.c9_pmovsr |= value;
+ pmu_update_irq(env);
}
static void pmevtyper_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -1648,6 +1760,7 @@ static void pmintenset_write(CPUARMState *env, const ARMCPRegInfo *ri,
/* We have no event counters so only the C bit can be changed */
value &= pmu_counter_mask(env);
env->cp15.c9_pminten |= value;
+ pmu_update_irq(env);
}
static void pmintenclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
@@ -1655,6 +1768,7 @@ static void pmintenclr_write(CPUARMState *env, const ARMCPRegInfo *ri,
{
value &= pmu_counter_mask(env);
env->cp15.c9_pminten &= ~value;
+ pmu_update_irq(env);
}
static void vbar_write(CPUARMState *env, const ARMCPRegInfo *ri,
Setup a QEMUTimer to get a callback when we expect counters to next overflow and trigger an interrupt at that time. Signed-off-by: Aaron Lindsay <alindsay@codeaurora.org> --- target/arm/cpu.c | 11 ++++ target/arm/cpu.h | 7 +++ target/arm/helper.c | 126 +++++++++++++++++++++++++++++++++++++++++--- 3 files changed, 138 insertions(+), 6 deletions(-)