diff mbox series

[10/14] hw/arm/raspi: Define various blocks base addresses

Message ID 20190904171315.8354-11-f4bug@amsat.org (mailing list archive)
State New, archived
Headers show
Series hw/arm: Add the Raspberry Pi 4B | expand

Commit Message

Philippe Mathieu-Daudé Sept. 4, 2019, 5:13 p.m. UTC
The Raspberry firmware is closed-source. While running it, it
accesses various I/O registers. Logging these accesses as UNIMP
(unimplemented) help to understand what the firmware is doing
(ideally we want it able to boot a Linux kernel).

Document various blocks we might use later.

Adresses and names based on:
https://github.com/hermanhermitage/videocoreiv/wiki/MMIO-Register-map

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
---
 include/hw/arm/raspi_platform.h | 49 +++++++++++++++++++++++++++------
 1 file changed, 40 insertions(+), 9 deletions(-)

Comments

Philippe Mathieu-Daudé Sept. 6, 2019, 10:07 a.m. UTC | #1
On 9/4/19 7:13 PM, Philippe Mathieu-Daudé wrote:
> The Raspberry firmware is closed-source. While running it, it
> accesses various I/O registers. Logging these accesses as UNIMP
> (unimplemented) help to understand what the firmware is doing
> (ideally we want it able to boot a Linux kernel).
> 
> Document various blocks we might use later.
> 
> Adresses and names based on:
> https://github.com/hermanhermitage/videocoreiv/wiki/MMIO-Register-map
> 
> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> ---
>  include/hw/arm/raspi_platform.h | 49 +++++++++++++++++++++++++++------
>  1 file changed, 40 insertions(+), 9 deletions(-)
> 
> diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h
> index 069edab526..c6f4985522 100644
> --- a/include/hw/arm/raspi_platform.h
> +++ b/include/hw/arm/raspi_platform.h
> @@ -25,42 +25,73 @@
>  #ifndef HW_ARM_RASPI_PLATFORM_H
>  #define HW_ARM_RASPI_PLATFORM_H
>  
> -#define MCORE_OFFSET            0x0000   /* Fake frame buffer device
> -                                          * (the multicore sync block) */
> -#define IC0_OFFSET              0x2000
> +#define MSYNC_OFFSET            0x0000   /* Multicore Sync Block */
> +#define CCPT_OFFSET             0x1000   /* Compact Camera Port 2 TX */
> +#define INTE_OFFSET             0x2000   /* VC Interrupt controller */
>  #define ST_OFFSET               0x3000   /* System Timer */
> +#define TXP_OFFSET              0x4000
> +#define JPEG_OFFSET             0x5000
>  #define MPHI_OFFSET             0x6000   /* Message-based Parallel Host Intf. */
>  #define DMA_OFFSET              0x7000   /* DMA controller, channels 0-14 */
> -#define ARM_OFFSET              0xB000   /* BCM2708 ARM control block */
> +#define ARBA_OFFSET             0x9000
> +#define BRDG_OFFSET             0xa000
> +#define ARM_OFFSET              0xB000   /* ARM control block */
>  #define ARMCTRL_OFFSET          (ARM_OFFSET + 0x000)
>  #define ARMCTRL_IC_OFFSET       (ARM_OFFSET + 0x200) /* Interrupt controller */
> -#define ARMCTRL_TIMER0_1_OFFSET (ARM_OFFSET + 0x400) /* Timer 0 and 1 */
> +#define ARMCTRL_TIMER0_1_OFFSET (ARM_OFFSET + 0x400) /* Timer 0 and 1 (SP804) */
>  #define ARMCTRL_0_SBM_OFFSET    (ARM_OFFSET + 0x800) /* User 0 (ARM) Semaphores
>                                                        * Doorbells & Mailboxes */
>  #define PM_OFFSET               0x100000 /* Power Management, Reset controller
>                                            * and Watchdog registers */
>  #define CPRMAN_OFFSET           0x101000 /* Clock Management */
> +#define A2W_OFFSET              0x102000
>  #define AVS_OFFSET              0x103000 /* Audio Video Standard */
>  #define RNG_OFFSET              0x104000
>  #define GPIO_OFFSET             0x200000
> -#define UART0_OFFSET            0x201000
> -#define MMCI0_OFFSET            0x202000
> -#define I2S_OFFSET              0x203000
> -#define SPI0_OFFSET             0x204000
> +#define UART0_OFFSET            0x201000 /* PL011 */
> +#define MMCI0_OFFSET            0x202000 /* Legacy MMC */
> +#define I2S_OFFSET              0x203000 /* PCM */
> +#define SPI0_OFFSET             0x204000 /* SPI master */
>  #define BSC0_OFFSET             0x205000 /* BSC0 I2C/TWI */
> +#define PIXV0_OFFSET            0x206000
> +#define PIXV1_OFFSET            0x207000
> +#define DPI_OFFSET              0x208000
> +#define DSI0_OFFSET             0x209000 /* Display Serial Interface */
> +#define PWM_OFFSET              0x20c000
> +#define PERM_OFFSET             0x20d000
> +#define TEC_OFFSET              0x20e000
>  #define OTP_OFFSET              0x20f000
> +#define SLIM_OFFSET             0x100000 /* SLIMbus */
> +#define CPG_OFFSET              0x110000
>  #define AVSP_OFFSET             0x130000

These should be:

#define SLIM_OFFSET             0x210000 /* SLIMbus */
#define CPG_OFFSET              0x211000
#define AVSP_OFFSET             0x213000

>  #define BSC_SL_OFFSET           0x214000 /* SPI slave */
> +#define THERMAL_OFFSET          0x212000
>  #define AUX_OFFSET              0x215000 /* AUX: UART1/SPI1/SPI2 */
>  #define EMMC1_OFFSET            0x300000
> +#define EMMC2_OFFSET            0x340000
> +#define HVS_OFFSET              0x400000
>  #define SMI_OFFSET              0x600000
> +#define DSI1_OFFSET             0x700000
> +#define UCAM_OFFSET             0x800000
> +#define CMI_OFFSET              0x802000
>  #define BSC1_OFFSET             0x804000 /* BSC1 I2C/TWI */
>  #define BSC2_OFFSET             0x805000 /* BSC2 I2C/TWI */
> +#define VECA_OFFSET             0x806000
> +#define PIXV2_OFFSET            0x807000
> +#define HDMI_OFFSET             0x808000
> +#define HDCP_OFFSET             0x809000
> +#define ARBR0_OFFSET            0x80a000
>  #define DBUS_OFFSET             0x900000
>  #define AVE0_OFFSET             0x910000
>  #define USB_OTG_OFFSET          0x980000 /* DTC_OTG USB controller */
> +#define V3D_OFFSET              0xc00000
>  #define SDRAMC_OFFSET           0xe00000
> +#define L2CC_OFFSET             0xe01000 /* Level 2 Cache controller */
> +#define L1CC_OFFSET             0xe02000 /* Level 1 Cache controller */
> +#define ARBR1_OFFSET            0xe04000
>  #define DMA15_OFFSET            0xE05000 /* DMA controller, channel 15 */
> +#define DCRC_OFFSET             0xe07000
> +#define AXIP_OFFSET             0xe08000
>  
>  /* GPU interrupts */
>  #define INTERRUPT_TIMER0               0
>
Esteban Bosse Sept. 29, 2019, 3:27 p.m. UTC | #2
El vie, 06-09-2019 a las 12:07 +0200, Philippe Mathieu-Daudé escribió:
> On 9/4/19 7:13 PM, Philippe Mathieu-Daudé wrote:
> > The Raspberry firmware is closed-source. While running it, it
> > accesses various I/O registers. Logging these accesses as UNIMP
> > (unimplemented) help to understand what the firmware is doing
> > (ideally we want it able to boot a Linux kernel).
> > 
> > Document various blocks we might use later.
> > 
> > Adresses and names based on:
> > https://github.com/hermanhermitage/videocoreiv/wiki/MMIO-Register-map
> > 
> > Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
> > ---
> >  include/hw/arm/raspi_platform.h | 49 +++++++++++++++++++++++++++
> > ------
> >  1 file changed, 40 insertions(+), 9 deletions(-)
> > 
> > diff --git a/include/hw/arm/raspi_platform.h
> > b/include/hw/arm/raspi_platform.h
> > index 069edab526..c6f4985522 100644
> > --- a/include/hw/arm/raspi_platform.h
> > +++ b/include/hw/arm/raspi_platform.h
> > @@ -25,42 +25,73 @@
> >  #ifndef HW_ARM_RASPI_PLATFORM_H
> >  #define HW_ARM_RASPI_PLATFORM_H
> >  
> > -#define MCORE_OFFSET            0x0000   /* Fake frame buffer
> > device
> > -                                          * (the multicore sync
> > block) */
> > -#define IC0_OFFSET              0x2000
> > +#define MSYNC_OFFSET            0x0000   /* Multicore Sync Block
> > */
> > +#define CCPT_OFFSET             0x1000   /* Compact Camera Port 2
> > TX */
> > +#define INTE_OFFSET             0x2000   /* VC Interrupt
> > controller */
> >  #define ST_OFFSET               0x3000   /* System Timer */
> > +#define TXP_OFFSET              0x4000
> > +#define JPEG_OFFSET             0x5000
> >  #define MPHI_OFFSET             0x6000   /* Message-based Parallel
> > Host Intf. */
> >  #define DMA_OFFSET              0x7000   /* DMA controller,
> > channels 0-14 */
> > -#define ARM_OFFSET              0xB000   /* BCM2708 ARM control
> > block */
> > +#define ARBA_OFFSET             0x9000
> > +#define BRDG_OFFSET             0xa000
> > +#define ARM_OFFSET              0xB000   /* ARM control block */
> >  #define ARMCTRL_OFFSET          (ARM_OFFSET + 0x000)
> >  #define ARMCTRL_IC_OFFSET       (ARM_OFFSET + 0x200) /* Interrupt
> > controller */
> > -#define ARMCTRL_TIMER0_1_OFFSET (ARM_OFFSET + 0x400) /* Timer 0
> > and 1 */
> > +#define ARMCTRL_TIMER0_1_OFFSET (ARM_OFFSET + 0x400) /* Timer 0
> > and 1 (SP804) */
> >  #define ARMCTRL_0_SBM_OFFSET    (ARM_OFFSET + 0x800) /* User 0
> > (ARM) Semaphores
> >                                                        * Doorbells
> > & Mailboxes */
> >  #define PM_OFFSET               0x100000 /* Power Management,
> > Reset controller
> >                                            * and Watchdog registers
> > */
> >  #define CPRMAN_OFFSET           0x101000 /* Clock Management */
> > +#define A2W_OFFSET              0x102000
> >  #define AVS_OFFSET              0x103000 /* Audio Video Standard
> > */
> >  #define RNG_OFFSET              0x104000
> >  #define GPIO_OFFSET             0x200000
> > -#define UART0_OFFSET            0x201000
> > -#define MMCI0_OFFSET            0x202000
> > -#define I2S_OFFSET              0x203000
> > -#define SPI0_OFFSET             0x204000
> > +#define UART0_OFFSET            0x201000 /* PL011 */
> > +#define MMCI0_OFFSET            0x202000 /* Legacy MMC */
> > +#define I2S_OFFSET              0x203000 /* PCM */
> > +#define SPI0_OFFSET             0x204000 /* SPI master */
> >  #define BSC0_OFFSET             0x205000 /* BSC0 I2C/TWI */
> > +#define PIXV0_OFFSET            0x206000
> > +#define PIXV1_OFFSET            0x207000
> > +#define DPI_OFFSET              0x208000
> > +#define DSI0_OFFSET             0x209000 /* Display Serial
> > Interface */
> > +#define PWM_OFFSET              0x20c000
> > +#define PERM_OFFSET             0x20d000
> > +#define TEC_OFFSET              0x20e000
> >  #define OTP_OFFSET              0x20f000
> > +#define SLIM_OFFSET             0x100000 /* SLIMbus */
> > +#define CPG_OFFSET              0x110000
> >  #define AVSP_OFFSET             0x130000
> 
> These should be:
> 
> #define SLIM_OFFSET             0x210000 /* SLIMbus */
> #define CPG_OFFSET              0x211000
> #define AVSP_OFFSET             0x213000
> 
> >  #define BSC_SL_OFFSET           0x214000 /* SPI slave */
Looking in 
https://github.com/hermanhermitage/videocoreiv/wiki/MMIO-Register-map I
found that 0x214000 is the "bootrom" register, why the difference?

> > +#define THERMAL_OFFSET          0x212000
> >  #define AUX_OFFSET              0x215000 /* AUX: UART1/SPI1/SPI2
> > */
> >  #define EMMC1_OFFSET            0x300000
> > +#define EMMC2_OFFSET            0x340000
> > +#define HVS_OFFSET              0x400000
In github describe 7E400000 as ddrv register, ddrv is the same as HVS?
> >  #define SMI_OFFSET              0x600000
> > +#define DSI1_OFFSET             0x700000
> > +#define UCAM_OFFSET             0x800000
> > +#define CMI_OFFSET              0x802000
> >  #define BSC1_OFFSET             0x804000 /* BSC1 I2C/TWI */
> >  #define BSC2_OFFSET             0x805000 /* BSC2 I2C/TWI */
> > +#define VECA_OFFSET             0x806000
> > +#define PIXV2_OFFSET            0x807000
> > +#define HDMI_OFFSET             0x808000
> > +#define HDCP_OFFSET             0x809000
> > +#define ARBR0_OFFSET            0x80a000
> >  #define DBUS_OFFSET             0x900000
> >  #define AVE0_OFFSET             0x910000
> >  #define USB_OTG_OFFSET          0x980000 /* DTC_OTG USB controller
> > */
> > +#define V3D_OFFSET              0xc00000
> >  #define SDRAMC_OFFSET           0xe00000
> > +#define L2CC_OFFSET             0xe01000 /* Level 2 Cache
> > controller */
> > +#define L1CC_OFFSET             0xe02000 /* Level 1 Cache
> > controller */
> > +#define ARBR1_OFFSET            0xe04000
> >  #define DMA15_OFFSET            0xE05000 /* DMA controller,
> > channel 15 */
> > +#define DCRC_OFFSET             0xe07000
> > +#define AXIP_OFFSET             0xe08000
> >  
> >  /* GPU interrupts */
> >  #define INTERRUPT_TIMER0               0
> >
Philippe Mathieu-Daudé Oct. 8, 2019, 9:16 a.m. UTC | #3
On 9/29/19 5:27 PM, Esteban Bosse wrote:
> El vie, 06-09-2019 a las 12:07 +0200, Philippe Mathieu-Daudé escribió:
>> On 9/4/19 7:13 PM, Philippe Mathieu-Daudé wrote:
>>> The Raspberry firmware is closed-source. While running it, it
>>> accesses various I/O registers. Logging these accesses as UNIMP
>>> (unimplemented) help to understand what the firmware is doing
>>> (ideally we want it able to boot a Linux kernel).
>>>
>>> Document various blocks we might use later.
>>>
>>> Adresses and names based on:
>>> https://github.com/hermanhermitage/videocoreiv/wiki/MMIO-Register-map
>>>
>>> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>>> ---
>>>   include/hw/arm/raspi_platform.h | 49 +++++++++++++++++++++++++++
>>> ------
>>>   1 file changed, 40 insertions(+), 9 deletions(-)
>>>
>>> diff --git a/include/hw/arm/raspi_platform.h
>>> b/include/hw/arm/raspi_platform.h
>>> index 069edab526..c6f4985522 100644
>>> --- a/include/hw/arm/raspi_platform.h
>>> +++ b/include/hw/arm/raspi_platform.h
>>> @@ -25,42 +25,73 @@
>>>   #ifndef HW_ARM_RASPI_PLATFORM_H
>>>   #define HW_ARM_RASPI_PLATFORM_H
>>>   
>>> -#define MCORE_OFFSET            0x0000   /* Fake frame buffer
>>> device
>>> -                                          * (the multicore sync
>>> block) */
>>> -#define IC0_OFFSET              0x2000
>>> +#define MSYNC_OFFSET            0x0000   /* Multicore Sync Block
>>> */
>>> +#define CCPT_OFFSET             0x1000   /* Compact Camera Port 2
>>> TX */
>>> +#define INTE_OFFSET             0x2000   /* VC Interrupt
>>> controller */
>>>   #define ST_OFFSET               0x3000   /* System Timer */
>>> +#define TXP_OFFSET              0x4000
>>> +#define JPEG_OFFSET             0x5000
>>>   #define MPHI_OFFSET             0x6000   /* Message-based Parallel
>>> Host Intf. */
>>>   #define DMA_OFFSET              0x7000   /* DMA controller,
>>> channels 0-14 */
>>> -#define ARM_OFFSET              0xB000   /* BCM2708 ARM control
>>> block */
>>> +#define ARBA_OFFSET             0x9000
>>> +#define BRDG_OFFSET             0xa000
>>> +#define ARM_OFFSET              0xB000   /* ARM control block */
>>>   #define ARMCTRL_OFFSET          (ARM_OFFSET + 0x000)
>>>   #define ARMCTRL_IC_OFFSET       (ARM_OFFSET + 0x200) /* Interrupt
>>> controller */
>>> -#define ARMCTRL_TIMER0_1_OFFSET (ARM_OFFSET + 0x400) /* Timer 0
>>> and 1 */
>>> +#define ARMCTRL_TIMER0_1_OFFSET (ARM_OFFSET + 0x400) /* Timer 0
>>> and 1 (SP804) */
>>>   #define ARMCTRL_0_SBM_OFFSET    (ARM_OFFSET + 0x800) /* User 0
>>> (ARM) Semaphores
>>>                                                         * Doorbells
>>> & Mailboxes */
>>>   #define PM_OFFSET               0x100000 /* Power Management,
>>> Reset controller
>>>                                             * and Watchdog registers
>>> */
>>>   #define CPRMAN_OFFSET           0x101000 /* Clock Management */
>>> +#define A2W_OFFSET              0x102000
>>>   #define AVS_OFFSET              0x103000 /* Audio Video Standard
>>> */
>>>   #define RNG_OFFSET              0x104000
>>>   #define GPIO_OFFSET             0x200000
>>> -#define UART0_OFFSET            0x201000
>>> -#define MMCI0_OFFSET            0x202000
>>> -#define I2S_OFFSET              0x203000
>>> -#define SPI0_OFFSET             0x204000
>>> +#define UART0_OFFSET            0x201000 /* PL011 */
>>> +#define MMCI0_OFFSET            0x202000 /* Legacy MMC */
>>> +#define I2S_OFFSET              0x203000 /* PCM */
>>> +#define SPI0_OFFSET             0x204000 /* SPI master */
>>>   #define BSC0_OFFSET             0x205000 /* BSC0 I2C/TWI */
>>> +#define PIXV0_OFFSET            0x206000
>>> +#define PIXV1_OFFSET            0x207000
>>> +#define DPI_OFFSET              0x208000
>>> +#define DSI0_OFFSET             0x209000 /* Display Serial
>>> Interface */
>>> +#define PWM_OFFSET              0x20c000
>>> +#define PERM_OFFSET             0x20d000
>>> +#define TEC_OFFSET              0x20e000
>>>   #define OTP_OFFSET              0x20f000
>>> +#define SLIM_OFFSET             0x100000 /* SLIMbus */
>>> +#define CPG_OFFSET              0x110000
>>>   #define AVSP_OFFSET             0x130000
>>
>> These should be:
>>
>> #define SLIM_OFFSET             0x210000 /* SLIMbus */
>> #define CPG_OFFSET              0x211000
>> #define AVSP_OFFSET             0x213000
>>
>>>   #define BSC_SL_OFFSET           0x214000 /* SPI slave */
> Looking in
> https://github.com/hermanhermitage/videocoreiv/wiki/MMIO-Register-map I
> found that 0x214000 is the "bootrom" register, why the difference?

This chipset family can have various SPI slave interfaces, but this one 
in particular is used by the VideoCore bootloader to load the ARM bootrom.

This file is generic to the chipset, so declaring BSC_SL_OFFSET here is 
OK IMO. Since the "bootrom" is specific to the bootloader, the 
definition should go into hw/arm/raspi.c such:

#define RASPI4_BOOTROM_OFFSET BSC_SL_OFFSET

>>> +#define THERMAL_OFFSET          0x212000
>>>   #define AUX_OFFSET              0x215000 /* AUX: UART1/SPI1/SPI2
>>> */
>>>   #define EMMC1_OFFSET            0x300000
>>> +#define EMMC2_OFFSET            0x340000
>>> +#define HVS_OFFSET              0x400000
> In github describe 7E400000 as ddrv register, ddrv is the same as HVS?

https://github.com/hermanhermitage/videocoreiv/wiki/MMIO-Register-map 
describes the VideoCore IV, this region appears unregistered.

The raspi4 uses the VideoCore VI. HVS means High-speed Video Scaler.
I assume this is a new block added to the VI core, Andrew might confirm.

>>>   #define SMI_OFFSET              0x600000
>>> +#define DSI1_OFFSET             0x700000
>>> +#define UCAM_OFFSET             0x800000
>>> +#define CMI_OFFSET              0x802000
>>>   #define BSC1_OFFSET             0x804000 /* BSC1 I2C/TWI */
>>>   #define BSC2_OFFSET             0x805000 /* BSC2 I2C/TWI */
>>> +#define VECA_OFFSET             0x806000
>>> +#define PIXV2_OFFSET            0x807000
>>> +#define HDMI_OFFSET             0x808000
>>> +#define HDCP_OFFSET             0x809000
>>> +#define ARBR0_OFFSET            0x80a000
>>>   #define DBUS_OFFSET             0x900000
>>>   #define AVE0_OFFSET             0x910000
>>>   #define USB_OTG_OFFSET          0x980000 /* DTC_OTG USB controller
>>> */
>>> +#define V3D_OFFSET              0xc00000
>>>   #define SDRAMC_OFFSET           0xe00000
>>> +#define L2CC_OFFSET             0xe01000 /* Level 2 Cache
>>> controller */
>>> +#define L1CC_OFFSET             0xe02000 /* Level 1 Cache
>>> controller */
>>> +#define ARBR1_OFFSET            0xe04000
>>>   #define DMA15_OFFSET            0xE05000 /* DMA controller,
>>> channel 15 */
>>> +#define DCRC_OFFSET             0xe07000
>>> +#define AXIP_OFFSET             0xe08000
>>>   
>>>   /* GPU interrupts */
>>>   #define INTERRUPT_TIMER0               0
>>>
>
diff mbox series

Patch

diff --git a/include/hw/arm/raspi_platform.h b/include/hw/arm/raspi_platform.h
index 069edab526..c6f4985522 100644
--- a/include/hw/arm/raspi_platform.h
+++ b/include/hw/arm/raspi_platform.h
@@ -25,42 +25,73 @@ 
 #ifndef HW_ARM_RASPI_PLATFORM_H
 #define HW_ARM_RASPI_PLATFORM_H
 
-#define MCORE_OFFSET            0x0000   /* Fake frame buffer device
-                                          * (the multicore sync block) */
-#define IC0_OFFSET              0x2000
+#define MSYNC_OFFSET            0x0000   /* Multicore Sync Block */
+#define CCPT_OFFSET             0x1000   /* Compact Camera Port 2 TX */
+#define INTE_OFFSET             0x2000   /* VC Interrupt controller */
 #define ST_OFFSET               0x3000   /* System Timer */
+#define TXP_OFFSET              0x4000
+#define JPEG_OFFSET             0x5000
 #define MPHI_OFFSET             0x6000   /* Message-based Parallel Host Intf. */
 #define DMA_OFFSET              0x7000   /* DMA controller, channels 0-14 */
-#define ARM_OFFSET              0xB000   /* BCM2708 ARM control block */
+#define ARBA_OFFSET             0x9000
+#define BRDG_OFFSET             0xa000
+#define ARM_OFFSET              0xB000   /* ARM control block */
 #define ARMCTRL_OFFSET          (ARM_OFFSET + 0x000)
 #define ARMCTRL_IC_OFFSET       (ARM_OFFSET + 0x200) /* Interrupt controller */
-#define ARMCTRL_TIMER0_1_OFFSET (ARM_OFFSET + 0x400) /* Timer 0 and 1 */
+#define ARMCTRL_TIMER0_1_OFFSET (ARM_OFFSET + 0x400) /* Timer 0 and 1 (SP804) */
 #define ARMCTRL_0_SBM_OFFSET    (ARM_OFFSET + 0x800) /* User 0 (ARM) Semaphores
                                                       * Doorbells & Mailboxes */
 #define PM_OFFSET               0x100000 /* Power Management, Reset controller
                                           * and Watchdog registers */
 #define CPRMAN_OFFSET           0x101000 /* Clock Management */
+#define A2W_OFFSET              0x102000
 #define AVS_OFFSET              0x103000 /* Audio Video Standard */
 #define RNG_OFFSET              0x104000
 #define GPIO_OFFSET             0x200000
-#define UART0_OFFSET            0x201000
-#define MMCI0_OFFSET            0x202000
-#define I2S_OFFSET              0x203000
-#define SPI0_OFFSET             0x204000
+#define UART0_OFFSET            0x201000 /* PL011 */
+#define MMCI0_OFFSET            0x202000 /* Legacy MMC */
+#define I2S_OFFSET              0x203000 /* PCM */
+#define SPI0_OFFSET             0x204000 /* SPI master */
 #define BSC0_OFFSET             0x205000 /* BSC0 I2C/TWI */
+#define PIXV0_OFFSET            0x206000
+#define PIXV1_OFFSET            0x207000
+#define DPI_OFFSET              0x208000
+#define DSI0_OFFSET             0x209000 /* Display Serial Interface */
+#define PWM_OFFSET              0x20c000
+#define PERM_OFFSET             0x20d000
+#define TEC_OFFSET              0x20e000
 #define OTP_OFFSET              0x20f000
+#define SLIM_OFFSET             0x100000 /* SLIMbus */
+#define CPG_OFFSET              0x110000
 #define AVSP_OFFSET             0x130000
 #define BSC_SL_OFFSET           0x214000 /* SPI slave */
+#define THERMAL_OFFSET          0x212000
 #define AUX_OFFSET              0x215000 /* AUX: UART1/SPI1/SPI2 */
 #define EMMC1_OFFSET            0x300000
+#define EMMC2_OFFSET            0x340000
+#define HVS_OFFSET              0x400000
 #define SMI_OFFSET              0x600000
+#define DSI1_OFFSET             0x700000
+#define UCAM_OFFSET             0x800000
+#define CMI_OFFSET              0x802000
 #define BSC1_OFFSET             0x804000 /* BSC1 I2C/TWI */
 #define BSC2_OFFSET             0x805000 /* BSC2 I2C/TWI */
+#define VECA_OFFSET             0x806000
+#define PIXV2_OFFSET            0x807000
+#define HDMI_OFFSET             0x808000
+#define HDCP_OFFSET             0x809000
+#define ARBR0_OFFSET            0x80a000
 #define DBUS_OFFSET             0x900000
 #define AVE0_OFFSET             0x910000
 #define USB_OTG_OFFSET          0x980000 /* DTC_OTG USB controller */
+#define V3D_OFFSET              0xc00000
 #define SDRAMC_OFFSET           0xe00000
+#define L2CC_OFFSET             0xe01000 /* Level 2 Cache controller */
+#define L1CC_OFFSET             0xe02000 /* Level 1 Cache controller */
+#define ARBR1_OFFSET            0xe04000
 #define DMA15_OFFSET            0xE05000 /* DMA controller, channel 15 */
+#define DCRC_OFFSET             0xe07000
+#define AXIP_OFFSET             0xe08000
 
 /* GPU interrupts */
 #define INTERRUPT_TIMER0               0