diff mbox series

[v3,4/7] hw/isa/piix{3, 4}: QOM'ify PCI device creation and wiring

Message ID 20220528192057.30910-5-shentey@gmail.com (mailing list archive)
State New, archived
Headers show
Series QOM'ify PIIX southbridge creation | expand

Commit Message

Bernhard Beschow May 28, 2022, 7:20 p.m. UTC
PCI interrupt wiring and device creation (piix4 only) were performed
in create() functions which are obsolete. Move these tasks into QOM
functions to modernize the code.

In order to avoid duplicate checking for xen_enabled() the piix3 realize
methods are now split.

Signed-off-by: Bernhard Beschow <shentey@gmail.com>
---
 hw/isa/piix3.c | 67 +++++++++++++++++++++++++++++++++-----------------
 hw/isa/piix4.c | 30 ++++++++++++++++------
 2 files changed, 67 insertions(+), 30 deletions(-)

Comments

Philippe Mathieu-Daudé May 30, 2022, 1:17 p.m. UTC | #1
Hi Bernhard,

On 28/5/22 21:20, Bernhard Beschow wrote:
> PCI interrupt wiring and device creation (piix4 only) were performed
> in create() functions which are obsolete. Move these tasks into QOM
> functions to modernize the code.
> 
> In order to avoid duplicate checking for xen_enabled() the piix3 realize
> methods are now split.
> 
> Signed-off-by: Bernhard Beschow <shentey@gmail.com>
> ---
>   hw/isa/piix3.c | 67 +++++++++++++++++++++++++++++++++-----------------
>   hw/isa/piix4.c | 30 ++++++++++++++++------
>   2 files changed, 67 insertions(+), 30 deletions(-)

While this is the same chipset family, these models are maintained by
different people... Do you mind splitting?

For PIIX4 part:
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Bernhard Beschow May 30, 2022, 9 p.m. UTC | #2
Am 30. Mai 2022 13:17:12 UTC schrieb "Philippe Mathieu-Daudé" <f4bug@amsat.org>:
>Hi Bernhard,

Hi Philippe,

>On 28/5/22 21:20, Bernhard Beschow wrote:
>> PCI interrupt wiring and device creation (piix4 only) were performed
>> in create() functions which are obsolete. Move these tasks into QOM
>> functions to modernize the code.
>> 
>> In order to avoid duplicate checking for xen_enabled() the piix3 realize
>> methods are now split.
>> 
>> Signed-off-by: Bernhard Beschow <shentey@gmail.com>
>> ---
>>   hw/isa/piix3.c | 67 +++++++++++++++++++++++++++++++++-----------------
>>   hw/isa/piix4.c | 30 ++++++++++++++++------
>>   2 files changed, 67 insertions(+), 30 deletions(-)
>
>While this is the same chipset family, these models are maintained by
>different people... Do you mind splitting?

Will do. I'd split the whole series then.

>For PIIX4 part:
>Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>
diff mbox series

Patch

diff --git a/hw/isa/piix3.c b/hw/isa/piix3.c
index c7a9014c3f..de532cc692 100644
--- a/hw/isa/piix3.c
+++ b/hw/isa/piix3.c
@@ -24,6 +24,7 @@ 
 
 #include "qemu/osdep.h"
 #include "qemu/range.h"
+#include "qapi/error.h"
 #include "hw/southbridge/piix.h"
 #include "hw/irq.h"
 #include "hw/isa/isa.h"
@@ -277,7 +278,7 @@  static const MemoryRegionOps rcr_ops = {
     .endianness = DEVICE_LITTLE_ENDIAN
 };
 
-static void piix3_realize(PCIDevice *dev, Error **errp)
+static void pci_piix3_realize(PCIDevice *dev, Error **errp)
 {
     PIIX3State *d = PIIX3_PCI_DEVICE(dev);
 
@@ -302,7 +303,6 @@  static void pci_piix3_class_init(ObjectClass *klass, void *data)
     dc->desc        = "ISA bridge";
     dc->vmsd        = &vmstate_piix3;
     dc->hotpluggable   = false;
-    k->realize      = piix3_realize;
     k->vendor_id    = PCI_VENDOR_ID_INTEL;
     /* 82371SB PIIX3 PCI-to-ISA bridge (Step A1) */
     k->device_id    = PCI_DEVICE_ID_INTEL_82371SB_0;
@@ -326,11 +326,28 @@  static const TypeInfo piix3_pci_type_info = {
     },
 };
 
+static void piix3_realize(PCIDevice *dev, Error **errp)
+{
+    ERRP_GUARD();
+    PIIX3State *piix3 = PIIX3_PCI_DEVICE(dev);
+    PCIBus *pci_bus = pci_get_bus(dev);
+
+    pci_piix3_realize(dev, errp);
+    if (*errp) {
+        return;
+    }
+
+    pci_bus_irqs(pci_bus, piix3_set_irq, pci_slot_get_pirq,
+                 piix3, PIIX_NUM_PIRQS);
+    pci_bus_set_route_irq_fn(pci_bus, piix3_route_intx_pin_to_irq);
+};
+
 static void piix3_class_init(ObjectClass *klass, void *data)
 {
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
     k->config_write = piix3_write_config;
+    k->realize = piix3_realize;
 }
 
 static const TypeInfo piix3_info = {
@@ -339,11 +356,33 @@  static const TypeInfo piix3_info = {
     .class_init    = piix3_class_init,
 };
 
+static void piix3_xen_realize(PCIDevice *dev, Error **errp)
+{
+    ERRP_GUARD();
+    PIIX3State *piix3 = PIIX3_PCI_DEVICE(dev);
+    PCIBus *pci_bus = pci_get_bus(dev);
+
+    pci_piix3_realize(dev, errp);
+    if (*errp) {
+        return;
+    }
+
+    /*
+     * Xen supports additional interrupt routes from the PCI devices to
+     * the IOAPIC: the four pins of each PCI device on the bus are also
+     * connected to the IOAPIC directly.
+     * These additional routes can be discovered through ACPI.
+     */
+    pci_bus_irqs(pci_bus, xen_piix3_set_irq, xen_pci_slot_get_pirq,
+                 piix3, XEN_PIIX_NUM_PIRQS);
+};
+
 static void piix3_xen_class_init(ObjectClass *klass, void *data)
 {
     PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
 
     k->config_write = piix3_write_config_xen;
+    k->realize = piix3_xen_realize;
 };
 
 static const TypeInfo piix3_xen_info = {
@@ -365,27 +404,11 @@  PIIX3State *piix3_create(PCIBus *pci_bus, ISABus **isa_bus)
 {
     PIIX3State *piix3;
     PCIDevice *pci_dev;
+    const char *type = xen_enabled() ? TYPE_PIIX3_XEN_DEVICE
+                                     : TYPE_PIIX3_DEVICE;
 
-    /*
-     * Xen supports additional interrupt routes from the PCI devices to
-     * the IOAPIC: the four pins of each PCI device on the bus are also
-     * connected to the IOAPIC directly.
-     * These additional routes can be discovered through ACPI.
-     */
-    if (xen_enabled()) {
-        pci_dev = pci_create_simple_multifunction(pci_bus, -1, true,
-                                                  TYPE_PIIX3_XEN_DEVICE);
-        piix3 = PIIX3_PCI_DEVICE(pci_dev);
-        pci_bus_irqs(pci_bus, xen_piix3_set_irq, xen_pci_slot_get_pirq,
-                     piix3, XEN_PIIX_NUM_PIRQS);
-    } else {
-        pci_dev = pci_create_simple_multifunction(pci_bus, -1, true,
-                                                  TYPE_PIIX3_DEVICE);
-        piix3 = PIIX3_PCI_DEVICE(pci_dev);
-        pci_bus_irqs(pci_bus, piix3_set_irq, pci_slot_get_pirq,
-                     piix3, PIIX_NUM_PIRQS);
-        pci_bus_set_route_irq_fn(pci_bus, piix3_route_intx_pin_to_irq);
-    }
+    pci_dev = pci_create_simple_multifunction(pci_bus, -1, true, type);
+    piix3 = PIIX3_PCI_DEVICE(pci_dev);
     *isa_bus = ISA_BUS(qdev_get_child_bus(DEVICE(piix3), "isa.0"));
 
     return piix3;
diff --git a/hw/isa/piix4.c b/hw/isa/piix4.c
index 18aa24424f..058bebb5e2 100644
--- a/hw/isa/piix4.c
+++ b/hw/isa/piix4.c
@@ -35,6 +35,7 @@ 
 #include "hw/rtc/mc146818rtc.h"
 #include "hw/ide/pci.h"
 #include "hw/acpi/piix4.h"
+#include "hw/usb/hcd-uhci.h"
 #include "migration/vmstate.h"
 #include "sysemu/reset.h"
 #include "sysemu/runstate.h"
@@ -46,6 +47,8 @@  struct PIIX4State {
     qemu_irq *isa;
 
     RTCState rtc;
+    PCIIDEState ide;
+    UHCIState uhci;
     /* Reset Control Register */
     MemoryRegion rcr_mem;
     uint8_t rcr;
@@ -205,6 +208,7 @@  static const MemoryRegionOps piix4_rcr_ops = {
 static void piix4_realize(PCIDevice *dev, Error **errp)
 {
     PIIX4State *s = PIIX4_PCI_DEVICE(dev);
+    PCIBus *pci_bus = pci_get_bus(dev);
     ISABus *isa_bus;
     qemu_irq *i8259_out_irq;
 
@@ -243,6 +247,21 @@  static void piix4_realize(PCIDevice *dev, Error **errp)
         return;
     }
     s->rtc.irq = isa_get_irq(ISA_DEVICE(&s->rtc), s->rtc.isairq);
+
+    /* IDE */
+    qdev_prop_set_int32(DEVICE(&s->ide), "addr", dev->devfn + 1);
+    if (!qdev_realize(DEVICE(&s->ide), BUS(pci_bus), errp)) {
+        return;
+    }
+    pci_ide_create_devs(PCI_DEVICE(&s->ide));
+
+    /* USB */
+    qdev_prop_set_int32(DEVICE(&s->uhci), "addr", dev->devfn + 2);
+    if (!qdev_realize(DEVICE(&s->uhci), BUS(pci_bus), errp)) {
+        return;
+    }
+
+    pci_bus_irqs(pci_bus, piix4_set_irq, pci_slot_get_pirq, s, PIIX_NUM_PIRQS);
 }
 
 static void piix4_init(Object *obj)
@@ -250,6 +269,8 @@  static void piix4_init(Object *obj)
     PIIX4State *s = PIIX4_PCI_DEVICE(obj);
 
     object_initialize_child(obj, "rtc", &s->rtc, TYPE_MC146818_RTC);
+    object_initialize_child(obj, "ide", &s->ide, "piix4-ide");
+    object_initialize_child(obj, "uhci", &s->uhci, "piix4-usb-uhci");
 }
 
 static void piix4_class_init(ObjectClass *klass, void *data)
@@ -293,7 +314,6 @@  type_init(piix4_register_types)
 
 DeviceState *piix4_create(PCIBus *pci_bus, ISABus **isa_bus, I2CBus **smbus)
 {
-    PIIX4State *s;
     PCIDevice *pci;
     DeviceState *dev;
     int devfn = PCI_DEVFN(10, 0);
@@ -301,15 +321,11 @@  DeviceState *piix4_create(PCIBus *pci_bus, ISABus **isa_bus, I2CBus **smbus)
     pci = pci_create_simple_multifunction(pci_bus, devfn,  true,
                                           TYPE_PIIX4_PCI_DEVICE);
     dev = DEVICE(pci);
-    s = PIIX4_PCI_DEVICE(pci);
+
     if (isa_bus) {
         *isa_bus = ISA_BUS(qdev_get_child_bus(dev, "isa.0"));
     }
 
-    pci = pci_create_simple(pci_bus, devfn + 1, "piix4-ide");
-    pci_ide_create_devs(pci);
-
-    pci_create_simple(pci_bus, devfn + 2, "piix4-usb-uhci");
     if (smbus) {
         pci = pci_new(devfn + 3, TYPE_PIIX4_PM);
         qdev_prop_set_uint32(DEVICE(pci), "smb_io_base", 0x1100);
@@ -320,7 +336,5 @@  DeviceState *piix4_create(PCIBus *pci_bus, ISABus **isa_bus, I2CBus **smbus)
         *smbus = I2C_BUS(qdev_get_child_bus(DEVICE(pci), "i2c"));
     }
 
-    pci_bus_irqs(pci_bus, piix4_set_irq, pci_slot_get_pirq, s, PIIX_NUM_PIRQS);
-
     return dev;
 }