diff mbox

[v2,5/5] xlnx-zynqmp-pmu: Connect the IOMOD GPI/GPO devices

Message ID 938a6b79c658dcdba39ed5b7f5a36806b25b655f.1519856998.git.alistair.francis@xilinx.com (mailing list archive)
State New, archived
Headers show

Commit Message

Alistair Francis Feb. 28, 2018, 10:32 p.m. UTC
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
---

 hw/microblaze/xlnx-zynqmp-pmu.c | 77 +++++++++++++++++++++++++++++++++++++++--
 1 file changed, 75 insertions(+), 2 deletions(-)

Comments

Philippe Mathieu-Daudé March 1, 2018, 5:17 p.m. UTC | #1
On 02/28/2018 07:32 PM, Alistair Francis wrote:
> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
> ---
> 
>  hw/microblaze/xlnx-zynqmp-pmu.c | 77 +++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 75 insertions(+), 2 deletions(-)
> 
> diff --git a/hw/microblaze/xlnx-zynqmp-pmu.c b/hw/microblaze/xlnx-zynqmp-pmu.c
> index 35a2314ffb..fa5f0bfcf1 100644
> --- a/hw/microblaze/xlnx-zynqmp-pmu.c
> +++ b/hw/microblaze/xlnx-zynqmp-pmu.c
> @@ -27,6 +27,7 @@
>  #include "hw/intc/xlnx-zynqmp-ipi.h"
>  #include "hw/intc/xlnx-pmu-iomod-intc.h"
>  #include "hw/timer/xlnx-pmu-iomod-pit.h"
> +#include "hw/gpio/xlnx-pmu-iomod-gp.h"
>  
>  /* Define the PMU device */
>  
> @@ -43,6 +44,9 @@
>  #define XLNX_ZYNQMP_PMU_NUM_IPIS    4
>  #define XLNX_ZYNQMP_PMU_NUM_PITS    4
>  
> +#define XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS    4
> +#define XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS    4
> +
>  static const uint64_t ipi_addr[XLNX_ZYNQMP_PMU_NUM_IPIS] = {
>      0xFF340000, 0xFF350000, 0xFF360000, 0xFF370000,
>  };
> @@ -57,6 +61,17 @@ static const uint64_t pit_irq[XLNX_ZYNQMP_PMU_NUM_PITS] = {
>      3, 4, 5, 6,
>  };
>  
> +static const uint64_t iomod_gpi_addr[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS] = {
> +    0xFFD40020, 0xFFD40024, 0xFFD40028, 0xFFD4002C,
> +};
> +static const uint64_t iomod_gpi_irq[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS] = {
> +    11, 12, 13, 14,
> +};
> +
> +static const uint64_t iomod_gpo_addr[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS] = {
> +    0xFFD40010, 0xFFD40014, 0xFFD40018, 0xFFD4001C,
> +};
> +
>  typedef struct XlnxZynqMPPMUSoCState {
>      /*< private >*/
>      DeviceState parent_obj;
> @@ -156,6 +171,8 @@ static void xlnx_zynqmp_pmu_init(MachineState *machine)
>      MemoryRegion *pmu_rom = g_new(MemoryRegion, 1);
>      MemoryRegion *pmu_ram = g_new(MemoryRegion, 1);
>      XlnxZynqMPIPI *ipi[XLNX_ZYNQMP_PMU_NUM_IPIS];
> +    XlnxPMUIOGPIO *iomod_gpi[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS];
> +    XlnxPMUIOGPIO *iomod_gpo[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS];
>      XlnxPMUPIT *pit[XLNX_ZYNQMP_PMU_NUM_PITS];
>      qemu_irq irq[32];
>      qemu_irq tmp_irq;
> @@ -197,10 +214,60 @@ static void xlnx_zynqmp_pmu_init(MachineState *machine)
>          sysbus_connect_irq(SYS_BUS_DEVICE(ipi[i]), 0, irq[ipi_irq[i]]);
>      }
>  
> +    /* Create and connect the IOMOD GPI device */
> +    for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS; i++) {
> +        iomod_gpi[i] = g_new0(XlnxPMUIOGPIO, 1);
> +        object_initialize(iomod_gpi[i], sizeof(XlnxPMUIOGPIO),
> +                          TYPE_XLNX_ZYNQMP_IOMOD_GPIO);
> +        qdev_set_parent_bus(DEVICE(iomod_gpi[i]), sysbus_get_default());
> +    }
> +
> +    for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS; i++) {
> +        object_property_set_bool(OBJECT(iomod_gpi[i]), true, "input",
> +                                 &error_abort);
> +        object_property_set_uint(OBJECT(iomod_gpi[i]), 0x20, "size",
> +                                 &error_abort);
> +        object_property_set_bool(OBJECT(iomod_gpi[i]), true, "realized",
> +                                 &error_abort);
> +        sysbus_mmio_map(SYS_BUS_DEVICE(iomod_gpi[i]), 0, iomod_gpi_addr[i]);
> +        sysbus_connect_irq(SYS_BUS_DEVICE(iomod_gpi[i]), 0,
> +                           irq[iomod_gpi_irq[i]]);
> +        /* The other GPIO lines connect to the ARM side of the SoC. When we
> +         * have a way to model MicroBlaze QEMU and ARM QEMU together we can
> +         * connect the GPIO lines.
> +         */
> +    }
> +
> +    /* Create and connect the IOMOD GPO device */
> +    for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS; i++) {
> +        iomod_gpo[i] = g_new0(XlnxPMUIOGPIO, 1);
> +        object_initialize(iomod_gpo[i], sizeof(XlnxPMUIOGPIO),
> +                          TYPE_XLNX_ZYNQMP_IOMOD_GPIO);
> +        qdev_set_parent_bus(DEVICE(iomod_gpo[i]), sysbus_get_default());
> +    }
> +
> +    for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS; i++) {
> +        object_property_set_bool(OBJECT(iomod_gpo[i]), false, "input",
> +                                 &error_abort);
> +        if (i) {
> +            object_property_set_uint(OBJECT(iomod_gpo[i]), 0x20, "size",
> +                                     &error_abort);
> +        } else {
> +            object_property_set_uint(OBJECT(iomod_gpo[i]), 0x09, "size",
> +                                     &error_abort);
> +        }
> +            object_property_set_uint(OBJECT(iomod_gpo[i]), 0x00, "gpo-init",

mis-indented :)

> +                                     &error_abort);
> +        object_property_set_bool(OBJECT(iomod_gpo[i]), true, "realized",
> +                                 &error_abort);
> +        sysbus_mmio_map(SYS_BUS_DEVICE(iomod_gpo[i]), 0, iomod_gpo_addr[i]);
> +    }
> +
>      /* Create and connect the IOMOD PIT devices */
>      for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_PITS; i++) {
>          pit[i] = g_new0(XlnxPMUPIT, 1);
> -        object_initialize(pit[i], sizeof(XlnxPMUPIT), TYPE_XLNX_ZYNQMP_IOMODULE_PIT);
> +        object_initialize(pit[i], sizeof(XlnxPMUPIT),
> +                          TYPE_XLNX_ZYNQMP_IOMODULE_PIT);
>          qdev_set_parent_bus(DEVICE(pit[i]), sysbus_get_default());
>      }
>  
> @@ -219,7 +286,13 @@ static void xlnx_zynqmp_pmu_init(MachineState *machine)
>      tmp_irq = qdev_get_gpio_in_named(DEVICE(pit[2]), "ps_hit_in", 0);
>      qdev_connect_gpio_out_named(DEVICE(pit[3]), "ps_hit_out", 0, tmp_irq);
>  
> -    /* TODO: PIT0 and PIT2 "ps_config" GPIO goes to The GPO1 device. */
> +    /* GP01 goes into PIT0 */
> +    tmp_irq = qdev_get_gpio_in_named(DEVICE(pit[0]), "ps_config", 0);
> +    qdev_connect_gpio_out(DEVICE(iomod_gpo[1]), 2, tmp_irq);
> +
> +    /* GP01 goes into PIT2 */
> +    tmp_irq = qdev_get_gpio_in_named(DEVICE(pit[2]), "ps_config", 0);
> +    qdev_connect_gpio_out(DEVICE(iomod_gpo[1]), 6, tmp_irq);
>  
>      /* Load the kernel */
>      microblaze_load_kernel(&pmu->cpu, XLNX_ZYNQMP_PMU_RAM_ADDR,
> 

Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Philippe Mathieu-Daudé March 1, 2018, 6:03 p.m. UTC | #2
On 02/28/2018 07:32 PM, Alistair Francis wrote:
> Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
> ---
> 
>  hw/microblaze/xlnx-zynqmp-pmu.c | 77 +++++++++++++++++++++++++++++++++++++++--
>  1 file changed, 75 insertions(+), 2 deletions(-)
> 
> diff --git a/hw/microblaze/xlnx-zynqmp-pmu.c b/hw/microblaze/xlnx-zynqmp-pmu.c
> index 35a2314ffb..fa5f0bfcf1 100644
> --- a/hw/microblaze/xlnx-zynqmp-pmu.c
> +++ b/hw/microblaze/xlnx-zynqmp-pmu.c
> @@ -27,6 +27,7 @@
>  #include "hw/intc/xlnx-zynqmp-ipi.h"
>  #include "hw/intc/xlnx-pmu-iomod-intc.h"
>  #include "hw/timer/xlnx-pmu-iomod-pit.h"
> +#include "hw/gpio/xlnx-pmu-iomod-gp.h"
>  
>  /* Define the PMU device */
>  
> @@ -43,6 +44,9 @@
>  #define XLNX_ZYNQMP_PMU_NUM_IPIS    4
>  #define XLNX_ZYNQMP_PMU_NUM_PITS    4
>  
> +#define XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS    4
> +#define XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS    4
> +
>  static const uint64_t ipi_addr[XLNX_ZYNQMP_PMU_NUM_IPIS] = {
>      0xFF340000, 0xFF350000, 0xFF360000, 0xFF370000,
>  };
> @@ -57,6 +61,17 @@ static const uint64_t pit_irq[XLNX_ZYNQMP_PMU_NUM_PITS] = {
>      3, 4, 5, 6,
>  };
>  
> +static const uint64_t iomod_gpi_addr[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS] = {
> +    0xFFD40020, 0xFFD40024, 0xFFD40028, 0xFFD4002C,
> +};
> +static const uint64_t iomod_gpi_irq[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS] = {
> +    11, 12, 13, 14,
> +};
> +
> +static const uint64_t iomod_gpo_addr[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS] = {
> +    0xFFD40010, 0xFFD40014, 0xFFD40018, 0xFFD4001C,
> +};
> +
>  typedef struct XlnxZynqMPPMUSoCState {
>      /*< private >*/
>      DeviceState parent_obj;
> @@ -156,6 +171,8 @@ static void xlnx_zynqmp_pmu_init(MachineState *machine)
>      MemoryRegion *pmu_rom = g_new(MemoryRegion, 1);
>      MemoryRegion *pmu_ram = g_new(MemoryRegion, 1);
>      XlnxZynqMPIPI *ipi[XLNX_ZYNQMP_PMU_NUM_IPIS];
> +    XlnxPMUIOGPIO *iomod_gpi[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS];
> +    XlnxPMUIOGPIO *iomod_gpo[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS];
>      XlnxPMUPIT *pit[XLNX_ZYNQMP_PMU_NUM_PITS];
>      qemu_irq irq[32];
>      qemu_irq tmp_irq;
> @@ -197,10 +214,60 @@ static void xlnx_zynqmp_pmu_init(MachineState *machine)
>          sysbus_connect_irq(SYS_BUS_DEVICE(ipi[i]), 0, irq[ipi_irq[i]]);
>      }
>  
> +    /* Create and connect the IOMOD GPI device */
> +    for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS; i++) {
> +        iomod_gpi[i] = g_new0(XlnxPMUIOGPIO, 1);
> +        object_initialize(iomod_gpi[i], sizeof(XlnxPMUIOGPIO),
> +                          TYPE_XLNX_ZYNQMP_IOMOD_GPIO);
> +        qdev_set_parent_bus(DEVICE(iomod_gpi[i]), sysbus_get_default());
> +    }
> +
> +    for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS; i++) {
> +        object_property_set_bool(OBJECT(iomod_gpi[i]), true, "input",
> +                                 &error_abort);
> +        object_property_set_uint(OBJECT(iomod_gpi[i]), 0x20, "size",
> +                                 &error_abort);

I previously misread this, you are initializing the 4 GPIs as GPI0, it
may be cleaner to add an index property to select the correct GPI
RegisterAccessInfo, or add a 'reserved' bitmask property and use a
generic GPI.
In particular GPI3 is read-only.

> +        object_property_set_bool(OBJECT(iomod_gpi[i]), true, "realized",
> +                                 &error_abort);
> +        sysbus_mmio_map(SYS_BUS_DEVICE(iomod_gpi[i]), 0, iomod_gpi_addr[i]);
> +        sysbus_connect_irq(SYS_BUS_DEVICE(iomod_gpi[i]), 0,
> +                           irq[iomod_gpi_irq[i]]);
> +        /* The other GPIO lines connect to the ARM side of the SoC. When we
> +         * have a way to model MicroBlaze QEMU and ARM QEMU together we can
> +         * connect the GPIO lines.
> +         */
> +    }
> +
> +    /* Create and connect the IOMOD GPO device */
> +    for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS; i++) {
> +        iomod_gpo[i] = g_new0(XlnxPMUIOGPIO, 1);
> +        object_initialize(iomod_gpo[i], sizeof(XlnxPMUIOGPIO),
> +                          TYPE_XLNX_ZYNQMP_IOMOD_GPIO);
> +        qdev_set_parent_bus(DEVICE(iomod_gpo[i]), sysbus_get_default());
> +    }
> +
> +    for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS; i++) {
> +        object_property_set_bool(OBJECT(iomod_gpo[i]), false, "input",
> +                                 &error_abort);
> +        if (i) {
> +            object_property_set_uint(OBJECT(iomod_gpo[i]), 0x20, "size",
> +                                     &error_abort);
> +        } else {
> +            object_property_set_uint(OBJECT(iomod_gpo[i]), 0x09, "size",
> +                                     &error_abort);
> +        }
> +            object_property_set_uint(OBJECT(iomod_gpo[i]), 0x00, "gpo-init",
> +                                     &error_abort);

Ditto, the 4 GPOs are initialized as GPO0 (and GPO3 is write-only, we
could use GUEST_ERROR reports).

> +        object_property_set_bool(OBJECT(iomod_gpo[i]), true, "realized",
> +                                 &error_abort);
> +        sysbus_mmio_map(SYS_BUS_DEVICE(iomod_gpo[i]), 0, iomod_gpo_addr[i]);
> +    }
> +
>      /* Create and connect the IOMOD PIT devices */
>      for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_PITS; i++) {
>          pit[i] = g_new0(XlnxPMUPIT, 1);
> -        object_initialize(pit[i], sizeof(XlnxPMUPIT), TYPE_XLNX_ZYNQMP_IOMODULE_PIT);
> +        object_initialize(pit[i], sizeof(XlnxPMUPIT),
> +                          TYPE_XLNX_ZYNQMP_IOMODULE_PIT);
>          qdev_set_parent_bus(DEVICE(pit[i]), sysbus_get_default());
>      }
>  
> @@ -219,7 +286,13 @@ static void xlnx_zynqmp_pmu_init(MachineState *machine)
>      tmp_irq = qdev_get_gpio_in_named(DEVICE(pit[2]), "ps_hit_in", 0);
>      qdev_connect_gpio_out_named(DEVICE(pit[3]), "ps_hit_out", 0, tmp_irq);
>  
> -    /* TODO: PIT0 and PIT2 "ps_config" GPIO goes to The GPO1 device. */
> +    /* GP01 goes into PIT0 */
> +    tmp_irq = qdev_get_gpio_in_named(DEVICE(pit[0]), "ps_config", 0);
> +    qdev_connect_gpio_out(DEVICE(iomod_gpo[1]), 2, tmp_irq);
> +
> +    /* GP01 goes into PIT2 */
> +    tmp_irq = qdev_get_gpio_in_named(DEVICE(pit[2]), "ps_config", 0);
> +    qdev_connect_gpio_out(DEVICE(iomod_gpo[1]), 6, tmp_irq);
>  
>      /* Load the kernel */
>      microblaze_load_kernel(&pmu->cpu, XLNX_ZYNQMP_PMU_RAM_ADDR,
>
Alistair Francis May 4, 2018, 3:54 a.m. UTC | #3
On Thu, Mar 1, 2018 at 10:03 AM Philippe Mathieu-Daudé <f4bug@amsat.org>
wrote:

> On 02/28/2018 07:32 PM, Alistair Francis wrote:
> > Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
> > ---
> >
> >  hw/microblaze/xlnx-zynqmp-pmu.c | 77
+++++++++++++++++++++++++++++++++++++++--
> >  1 file changed, 75 insertions(+), 2 deletions(-)
> >
> > diff --git a/hw/microblaze/xlnx-zynqmp-pmu.c
b/hw/microblaze/xlnx-zynqmp-pmu.c
> > index 35a2314ffb..fa5f0bfcf1 100644
> > --- a/hw/microblaze/xlnx-zynqmp-pmu.c
> > +++ b/hw/microblaze/xlnx-zynqmp-pmu.c
> > @@ -27,6 +27,7 @@
> >  #include "hw/intc/xlnx-zynqmp-ipi.h"
> >  #include "hw/intc/xlnx-pmu-iomod-intc.h"
> >  #include "hw/timer/xlnx-pmu-iomod-pit.h"
> > +#include "hw/gpio/xlnx-pmu-iomod-gp.h"
> >
> >  /* Define the PMU device */
> >
> > @@ -43,6 +44,9 @@
> >  #define XLNX_ZYNQMP_PMU_NUM_IPIS    4
> >  #define XLNX_ZYNQMP_PMU_NUM_PITS    4
> >
> > +#define XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS    4
> > +#define XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS    4
> > +
> >  static const uint64_t ipi_addr[XLNX_ZYNQMP_PMU_NUM_IPIS] = {
> >      0xFF340000, 0xFF350000, 0xFF360000, 0xFF370000,
> >  };
> > @@ -57,6 +61,17 @@ static const uint64_t
pit_irq[XLNX_ZYNQMP_PMU_NUM_PITS] = {
> >      3, 4, 5, 6,
> >  };
> >
> > +static const uint64_t iomod_gpi_addr[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS] =
{
> > +    0xFFD40020, 0xFFD40024, 0xFFD40028, 0xFFD4002C,
> > +};
> > +static const uint64_t iomod_gpi_irq[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS] = {
> > +    11, 12, 13, 14,
> > +};
> > +
> > +static const uint64_t iomod_gpo_addr[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS] =
{
> > +    0xFFD40010, 0xFFD40014, 0xFFD40018, 0xFFD4001C,
> > +};
> > +
> >  typedef struct XlnxZynqMPPMUSoCState {
> >      /*< private >*/
> >      DeviceState parent_obj;
> > @@ -156,6 +171,8 @@ static void xlnx_zynqmp_pmu_init(MachineState
*machine)
> >      MemoryRegion *pmu_rom = g_new(MemoryRegion, 1);
> >      MemoryRegion *pmu_ram = g_new(MemoryRegion, 1);
> >      XlnxZynqMPIPI *ipi[XLNX_ZYNQMP_PMU_NUM_IPIS];
> > +    XlnxPMUIOGPIO *iomod_gpi[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS];
> > +    XlnxPMUIOGPIO *iomod_gpo[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS];
> >      XlnxPMUPIT *pit[XLNX_ZYNQMP_PMU_NUM_PITS];
> >      qemu_irq irq[32];
> >      qemu_irq tmp_irq;
> > @@ -197,10 +214,60 @@ static void xlnx_zynqmp_pmu_init(MachineState
*machine)
> >          sysbus_connect_irq(SYS_BUS_DEVICE(ipi[i]), 0, irq[ipi_irq[i]]);
> >      }
> >
> > +    /* Create and connect the IOMOD GPI device */
> > +    for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS; i++) {
> > +        iomod_gpi[i] = g_new0(XlnxPMUIOGPIO, 1);
> > +        object_initialize(iomod_gpi[i], sizeof(XlnxPMUIOGPIO),
> > +                          TYPE_XLNX_ZYNQMP_IOMOD_GPIO);
> > +        qdev_set_parent_bus(DEVICE(iomod_gpi[i]),
sysbus_get_default());
> > +    }
> > +
> > +    for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS; i++) {
> > +        object_property_set_bool(OBJECT(iomod_gpi[i]), true, "input",
> > +                                 &error_abort);
> > +        object_property_set_uint(OBJECT(iomod_gpi[i]), 0x20, "size",
> > +                                 &error_abort);

> I previously misread this, you are initializing the 4 GPIs as GPI0, it
> may be cleaner to add an index property to select the correct GPI
> RegisterAccessInfo, or add a 'reserved' bitmask property and use a
> generic GPI.
> In particular GPI3 is read-only.

I'm not sure what you mean here.

Alistair
diff mbox

Patch

diff --git a/hw/microblaze/xlnx-zynqmp-pmu.c b/hw/microblaze/xlnx-zynqmp-pmu.c
index 35a2314ffb..fa5f0bfcf1 100644
--- a/hw/microblaze/xlnx-zynqmp-pmu.c
+++ b/hw/microblaze/xlnx-zynqmp-pmu.c
@@ -27,6 +27,7 @@ 
 #include "hw/intc/xlnx-zynqmp-ipi.h"
 #include "hw/intc/xlnx-pmu-iomod-intc.h"
 #include "hw/timer/xlnx-pmu-iomod-pit.h"
+#include "hw/gpio/xlnx-pmu-iomod-gp.h"
 
 /* Define the PMU device */
 
@@ -43,6 +44,9 @@ 
 #define XLNX_ZYNQMP_PMU_NUM_IPIS    4
 #define XLNX_ZYNQMP_PMU_NUM_PITS    4
 
+#define XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS    4
+#define XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS    4
+
 static const uint64_t ipi_addr[XLNX_ZYNQMP_PMU_NUM_IPIS] = {
     0xFF340000, 0xFF350000, 0xFF360000, 0xFF370000,
 };
@@ -57,6 +61,17 @@  static const uint64_t pit_irq[XLNX_ZYNQMP_PMU_NUM_PITS] = {
     3, 4, 5, 6,
 };
 
+static const uint64_t iomod_gpi_addr[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS] = {
+    0xFFD40020, 0xFFD40024, 0xFFD40028, 0xFFD4002C,
+};
+static const uint64_t iomod_gpi_irq[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS] = {
+    11, 12, 13, 14,
+};
+
+static const uint64_t iomod_gpo_addr[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS] = {
+    0xFFD40010, 0xFFD40014, 0xFFD40018, 0xFFD4001C,
+};
+
 typedef struct XlnxZynqMPPMUSoCState {
     /*< private >*/
     DeviceState parent_obj;
@@ -156,6 +171,8 @@  static void xlnx_zynqmp_pmu_init(MachineState *machine)
     MemoryRegion *pmu_rom = g_new(MemoryRegion, 1);
     MemoryRegion *pmu_ram = g_new(MemoryRegion, 1);
     XlnxZynqMPIPI *ipi[XLNX_ZYNQMP_PMU_NUM_IPIS];
+    XlnxPMUIOGPIO *iomod_gpi[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS];
+    XlnxPMUIOGPIO *iomod_gpo[XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS];
     XlnxPMUPIT *pit[XLNX_ZYNQMP_PMU_NUM_PITS];
     qemu_irq irq[32];
     qemu_irq tmp_irq;
@@ -197,10 +214,60 @@  static void xlnx_zynqmp_pmu_init(MachineState *machine)
         sysbus_connect_irq(SYS_BUS_DEVICE(ipi[i]), 0, irq[ipi_irq[i]]);
     }
 
+    /* Create and connect the IOMOD GPI device */
+    for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS; i++) {
+        iomod_gpi[i] = g_new0(XlnxPMUIOGPIO, 1);
+        object_initialize(iomod_gpi[i], sizeof(XlnxPMUIOGPIO),
+                          TYPE_XLNX_ZYNQMP_IOMOD_GPIO);
+        qdev_set_parent_bus(DEVICE(iomod_gpi[i]), sysbus_get_default());
+    }
+
+    for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_IOMOD_GPIS; i++) {
+        object_property_set_bool(OBJECT(iomod_gpi[i]), true, "input",
+                                 &error_abort);
+        object_property_set_uint(OBJECT(iomod_gpi[i]), 0x20, "size",
+                                 &error_abort);
+        object_property_set_bool(OBJECT(iomod_gpi[i]), true, "realized",
+                                 &error_abort);
+        sysbus_mmio_map(SYS_BUS_DEVICE(iomod_gpi[i]), 0, iomod_gpi_addr[i]);
+        sysbus_connect_irq(SYS_BUS_DEVICE(iomod_gpi[i]), 0,
+                           irq[iomod_gpi_irq[i]]);
+        /* The other GPIO lines connect to the ARM side of the SoC. When we
+         * have a way to model MicroBlaze QEMU and ARM QEMU together we can
+         * connect the GPIO lines.
+         */
+    }
+
+    /* Create and connect the IOMOD GPO device */
+    for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS; i++) {
+        iomod_gpo[i] = g_new0(XlnxPMUIOGPIO, 1);
+        object_initialize(iomod_gpo[i], sizeof(XlnxPMUIOGPIO),
+                          TYPE_XLNX_ZYNQMP_IOMOD_GPIO);
+        qdev_set_parent_bus(DEVICE(iomod_gpo[i]), sysbus_get_default());
+    }
+
+    for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_IOMOD_GPOS; i++) {
+        object_property_set_bool(OBJECT(iomod_gpo[i]), false, "input",
+                                 &error_abort);
+        if (i) {
+            object_property_set_uint(OBJECT(iomod_gpo[i]), 0x20, "size",
+                                     &error_abort);
+        } else {
+            object_property_set_uint(OBJECT(iomod_gpo[i]), 0x09, "size",
+                                     &error_abort);
+        }
+            object_property_set_uint(OBJECT(iomod_gpo[i]), 0x00, "gpo-init",
+                                     &error_abort);
+        object_property_set_bool(OBJECT(iomod_gpo[i]), true, "realized",
+                                 &error_abort);
+        sysbus_mmio_map(SYS_BUS_DEVICE(iomod_gpo[i]), 0, iomod_gpo_addr[i]);
+    }
+
     /* Create and connect the IOMOD PIT devices */
     for (i = 0; i < XLNX_ZYNQMP_PMU_NUM_PITS; i++) {
         pit[i] = g_new0(XlnxPMUPIT, 1);
-        object_initialize(pit[i], sizeof(XlnxPMUPIT), TYPE_XLNX_ZYNQMP_IOMODULE_PIT);
+        object_initialize(pit[i], sizeof(XlnxPMUPIT),
+                          TYPE_XLNX_ZYNQMP_IOMODULE_PIT);
         qdev_set_parent_bus(DEVICE(pit[i]), sysbus_get_default());
     }
 
@@ -219,7 +286,13 @@  static void xlnx_zynqmp_pmu_init(MachineState *machine)
     tmp_irq = qdev_get_gpio_in_named(DEVICE(pit[2]), "ps_hit_in", 0);
     qdev_connect_gpio_out_named(DEVICE(pit[3]), "ps_hit_out", 0, tmp_irq);
 
-    /* TODO: PIT0 and PIT2 "ps_config" GPIO goes to The GPO1 device. */
+    /* GP01 goes into PIT0 */
+    tmp_irq = qdev_get_gpio_in_named(DEVICE(pit[0]), "ps_config", 0);
+    qdev_connect_gpio_out(DEVICE(iomod_gpo[1]), 2, tmp_irq);
+
+    /* GP01 goes into PIT2 */
+    tmp_irq = qdev_get_gpio_in_named(DEVICE(pit[2]), "ps_config", 0);
+    qdev_connect_gpio_out(DEVICE(iomod_gpo[1]), 6, tmp_irq);
 
     /* Load the kernel */
     microblaze_load_kernel(&pmu->cpu, XLNX_ZYNQMP_PMU_RAM_ADDR,