diff mbox series

[v3,01/13] spi: atmel-quadspi: cache MR value to avoid a write access

Message ID 20190202040653.1217-2-tudor.ambarus@microchip.com (mailing list archive)
State Superseded
Headers show
Series spi: atmel-quadspi: introduce sam9x60 qspi controller | expand

Commit Message

Tudor Ambarus Feb. 2, 2019, 4:07 a.m. UTC
From: Tudor Ambarus <tudor.ambarus@microchip.com>

Cache Serial Memory Mode (SMM) value to avoid write access when
setting the controller in serial memory mode. SMM is set in
exec_op() and not at probe time, to let room for future regular
SPI support.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v3: update smm value when different. rename mr/smm
v2: cache MR value instead of moving the write access at probe

 drivers/spi/atmel-quadspi.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)

Comments

Boris Brezillon Feb. 2, 2019, 7:06 a.m. UTC | #1
On Sat, 2 Feb 2019 04:07:13 +0000
<Tudor.Ambarus@microchip.com> wrote:

> From: Tudor Ambarus <tudor.ambarus@microchip.com>
> 
> Cache Serial Memory Mode (SMM) value to avoid write access when
> setting the controller in serial memory mode. SMM is set in
> exec_op() and not at probe time, to let room for future regular
> SPI support.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
> v3: update smm value when different. rename mr/smm
> v2: cache MR value instead of moving the write access at probe
> 
>  drivers/spi/atmel-quadspi.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
> index ddc712410812..645284c6ec9a 100644
> --- a/drivers/spi/atmel-quadspi.c
> +++ b/drivers/spi/atmel-quadspi.c
> @@ -155,6 +155,7 @@ struct atmel_qspi {
>  	struct clk		*clk;
>  	struct platform_device	*pdev;
>  	u32			pending;
> +	u32			smm;
>  	struct completion	cmd_completion;
>  };
>  
> @@ -238,7 +239,11 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
>  	icr = QSPI_ICR_INST(op->cmd.opcode);
>  	ifr = QSPI_IFR_INSTEN;
>  
> -	qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
> +	/* Set the QSPI controller in Serial Memory Mode */
> +	if (aq->smm != QSPI_MR_SMM) {

Sorry, I think I misunderstood your previous suggestion, I thought the
reg was called SMM. If the reg is called MR and the value you expect in
there is SMM, then the field should be named ->mr as it caches the
whole reg, not only the SMM bit. So it's actually:

	if (aq->mr != QSPI_MR_SMM) {

> +		qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
> +		aq->smm = QSPI_MR_SMM;
> +	}
>  
>  	mode = find_mode(op);
>  	if (mode < 0)
Tudor Ambarus Feb. 2, 2019, 8:38 a.m. UTC | #2
On 02/02/2019 09:06 AM, Boris Brezillon wrote:
> On Sat, 2 Feb 2019 04:07:13 +0000
> <Tudor.Ambarus@microchip.com> wrote:
> 
>> From: Tudor Ambarus <tudor.ambarus@microchip.com>
>>
>> Cache Serial Memory Mode (SMM) value to avoid write access when
>> setting the controller in serial memory mode. SMM is set in
>> exec_op() and not at probe time, to let room for future regular
>> SPI support.
>>
>> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
>> ---
>> v3: update smm value when different. rename mr/smm
>> v2: cache MR value instead of moving the write access at probe
>>
>>  drivers/spi/atmel-quadspi.c | 7 ++++++-
>>  1 file changed, 6 insertions(+), 1 deletion(-)
>>
>> diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
>> index ddc712410812..645284c6ec9a 100644
>> --- a/drivers/spi/atmel-quadspi.c
>> +++ b/drivers/spi/atmel-quadspi.c
>> @@ -155,6 +155,7 @@ struct atmel_qspi {
>>  	struct clk		*clk;
>>  	struct platform_device	*pdev;
>>  	u32			pending;
>> +	u32			smm;
>>  	struct completion	cmd_completion;
>>  };
>>  
>> @@ -238,7 +239,11 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
>>  	icr = QSPI_ICR_INST(op->cmd.opcode);
>>  	ifr = QSPI_IFR_INSTEN;
>>  
>> -	qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
>> +	/* Set the QSPI controller in Serial Memory Mode */
>> +	if (aq->smm != QSPI_MR_SMM) {
> 
> Sorry, I think I misunderstood your previous suggestion, I thought the
> reg was called SMM. If the reg is called MR and the value you expect in
> there is SMM, then the field should be named ->mr as it caches the
> whole reg, not only the SMM bit. So it's actually:
> 
> 	if (aq->mr != QSPI_MR_SMM) {

No worries. When keeping the reg name, and not the bit itself, I would expect to
do the check as in v2, to let room for checking other bits too:

+	if (!(aq->mr & QSPI_MR_SMM))

I don't have any problems to keep "mr" name, but I would like to understand your
reasons.

Thanks,
ta

> 
>> +		qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
>> +		aq->smm = QSPI_MR_SMM;
>> +	}
>>  
>>  	mode = find_mode(op);
>>  	if (mode < 0)
> 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
Boris Brezillon Feb. 2, 2019, 1:20 p.m. UTC | #3
On Sat, 2 Feb 2019 08:38:40 +0000
<Tudor.Ambarus@microchip.com> wrote:

> On 02/02/2019 09:06 AM, Boris Brezillon wrote:
> > On Sat, 2 Feb 2019 04:07:13 +0000
> > <Tudor.Ambarus@microchip.com> wrote:
> >   
> >> From: Tudor Ambarus <tudor.ambarus@microchip.com>
> >>
> >> Cache Serial Memory Mode (SMM) value to avoid write access when
> >> setting the controller in serial memory mode. SMM is set in
> >> exec_op() and not at probe time, to let room for future regular
> >> SPI support.
> >>
> >> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> >> ---
> >> v3: update smm value when different. rename mr/smm
> >> v2: cache MR value instead of moving the write access at probe
> >>
> >>  drivers/spi/atmel-quadspi.c | 7 ++++++-
> >>  1 file changed, 6 insertions(+), 1 deletion(-)
> >>
> >> diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
> >> index ddc712410812..645284c6ec9a 100644
> >> --- a/drivers/spi/atmel-quadspi.c
> >> +++ b/drivers/spi/atmel-quadspi.c
> >> @@ -155,6 +155,7 @@ struct atmel_qspi {
> >>  	struct clk		*clk;
> >>  	struct platform_device	*pdev;
> >>  	u32			pending;
> >> +	u32			smm;
> >>  	struct completion	cmd_completion;
> >>  };
> >>  
> >> @@ -238,7 +239,11 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
> >>  	icr = QSPI_ICR_INST(op->cmd.opcode);
> >>  	ifr = QSPI_IFR_INSTEN;
> >>  
> >> -	qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
> >> +	/* Set the QSPI controller in Serial Memory Mode */
> >> +	if (aq->smm != QSPI_MR_SMM) {  
> > 
> > Sorry, I think I misunderstood your previous suggestion, I thought the
> > reg was called SMM. If the reg is called MR and the value you expect in
> > there is SMM, then the field should be named ->mr as it caches the
> > whole reg, not only the SMM bit. So it's actually:
> > 
> > 	if (aq->mr != QSPI_MR_SMM) {  
> 
> No worries. When keeping the reg name, and not the bit itself, I would expect to
> do the check as in v2, to let room for checking other bits too:
> 
> +	if (!(aq->mr & QSPI_MR_SMM))
> 
> I don't have any problems to keep "mr" name, but I would like to understand your
> reasons.

Either you want to only set the SMM bit and keep the other bits
untouched or you want to make sure the register contains the value you
expect for all bitfields. If you're trying to achieve the former, you
should only update SMM instead of setting SMM + clearing all other
bits. In the other hand, if you want to apply a new MR setting where
you know exactly that only SMM should be set, that means you should
test the value in the cache (->mr) against the value you expect, and
not only the check that QSPI_MR_SMM is set.

BTW, you should probably initialize ->mr at probe time (using a
readl_relaxed()).
diff mbox series

Patch

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index ddc712410812..645284c6ec9a 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -155,6 +155,7 @@  struct atmel_qspi {
 	struct clk		*clk;
 	struct platform_device	*pdev;
 	u32			pending;
+	u32			smm;
 	struct completion	cmd_completion;
 };
 
@@ -238,7 +239,11 @@  static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 	icr = QSPI_ICR_INST(op->cmd.opcode);
 	ifr = QSPI_IFR_INSTEN;
 
-	qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
+	/* Set the QSPI controller in Serial Memory Mode */
+	if (aq->smm != QSPI_MR_SMM) {
+		qspi_writel(aq, QSPI_MR, QSPI_MR_SMM);
+		aq->smm = QSPI_MR_SMM;
+	}
 
 	mode = find_mode(op);
 	if (mode < 0)