diff mbox series

[v3,08/13] spi: atmel-quadspi: drop unused and NOP transfer macros

Message ID 20190202040653.1217-9-tudor.ambarus@microchip.com (mailing list archive)
State Superseded
Headers show
Series spi: atmel-quadspi: introduce sam9x60 qspi controller | expand

Commit Message

Tudor Ambarus Feb. 2, 2019, 4:07 a.m. UTC
From: Tudor Ambarus <tudor.ambarus@microchip.com>

Remove NOP when setting read transfer type. Remove useless
setting of write transfer type when
op->data.dir == SPI_MEM_DATA_IN && !op->data.nbytes.

QSPI_IFR_TFRTYP_TRSFR_WRITE is specific just to sama5d2 qspi,
rename it to QSPI_IFR_SAMA5D2_WRITE_TRSFR.

Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
---
v3: new patch

 drivers/spi/atmel-quadspi.c | 12 +++---------
 1 file changed, 3 insertions(+), 9 deletions(-)

Comments

Boris Brezillon Feb. 2, 2019, 7:13 a.m. UTC | #1
On Sat, 2 Feb 2019 04:07:33 +0000
<Tudor.Ambarus@microchip.com> wrote:

> From: Tudor Ambarus <tudor.ambarus@microchip.com>
> 
> Remove NOP when setting read transfer type. Remove useless
> setting of write transfer type when
> op->data.dir == SPI_MEM_DATA_IN && !op->data.nbytes.
> 
> QSPI_IFR_TFRTYP_TRSFR_WRITE is specific just to sama5d2 qspi,
> rename it to QSPI_IFR_SAMA5D2_WRITE_TRSFR.
> 
> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> ---
> v3: new patch
> 
>  drivers/spi/atmel-quadspi.c | 12 +++---------
>  1 file changed, 3 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
> index d26d4cd0e36b..bfa5f5e92d96 100644
> --- a/drivers/spi/atmel-quadspi.c
> +++ b/drivers/spi/atmel-quadspi.c
> @@ -113,11 +113,7 @@
>  #define QSPI_IFR_OPTL_4BIT              (2 << 8)
>  #define QSPI_IFR_OPTL_8BIT              (3 << 8)
>  #define QSPI_IFR_ADDRL                  BIT(10)
> -#define QSPI_IFR_TFRTYP_MASK            GENMASK(13, 12)
> -#define QSPI_IFR_TFRTYP_TRSFR_READ      (0 << 12)
> -#define QSPI_IFR_TFRTYP_TRSFR_READ_MEM  (1 << 12)
> -#define QSPI_IFR_TFRTYP_TRSFR_WRITE     (2 << 12)
> -#define QSPI_IFR_TFRTYP_TRSFR_WRITE_MEM (3 << 13)
> +#define QSPI_IFR_SAMA5D2_WRITE_TRSFR	BIT(13)

Can you define QSPI_IFR_TFRTYP_MEM (bit 12) even if it's not used yet?

>  #define QSPI_IFR_CRM                    BIT(14)
>  #define QSPI_IFR_NBDUM_MASK             GENMASK(20, 16)
>  #define QSPI_IFR_NBDUM(n)               (((n) << 16) & QSPI_IFR_NBDUM_MASK)
> @@ -273,10 +269,8 @@ static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
>  	if (op->data.nbytes)
>  		ifr |= QSPI_IFR_DATAEN;
>  
> -	if (op->data.dir == SPI_MEM_DATA_IN && op->data.nbytes)
> -		ifr |= QSPI_IFR_TFRTYP_TRSFR_READ;
> -	else
> -		ifr |= QSPI_IFR_TFRTYP_TRSFR_WRITE;
> +	if (op->data.dir == SPI_MEM_DATA_OUT)
> +		ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR;
>  
>  	/* Clear pending interrupts */
>  	(void)readl_relaxed(base + QSPI_SR);
Tudor Ambarus Feb. 2, 2019, 8:46 a.m. UTC | #2
On 02/02/2019 09:13 AM, Boris Brezillon wrote:
> On Sat, 2 Feb 2019 04:07:33 +0000
> <Tudor.Ambarus@microchip.com> wrote:
> 
>> From: Tudor Ambarus <tudor.ambarus@microchip.com>
>>
>> Remove NOP when setting read transfer type. Remove useless
>> setting of write transfer type when
>> op->data.dir == SPI_MEM_DATA_IN && !op->data.nbytes.
>>
>> QSPI_IFR_TFRTYP_TRSFR_WRITE is specific just to sama5d2 qspi,
>> rename it to QSPI_IFR_SAMA5D2_WRITE_TRSFR.
>>
>> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
>> ---
>> v3: new patch
>>
>>  drivers/spi/atmel-quadspi.c | 12 +++---------
>>  1 file changed, 3 insertions(+), 9 deletions(-)
>>
>> diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
>> index d26d4cd0e36b..bfa5f5e92d96 100644
>> --- a/drivers/spi/atmel-quadspi.c
>> +++ b/drivers/spi/atmel-quadspi.c
>> @@ -113,11 +113,7 @@
>>  #define QSPI_IFR_OPTL_4BIT              (2 << 8)
>>  #define QSPI_IFR_OPTL_8BIT              (3 << 8)
>>  #define QSPI_IFR_ADDRL                  BIT(10)
>> -#define QSPI_IFR_TFRTYP_MASK            GENMASK(13, 12)
>> -#define QSPI_IFR_TFRTYP_TRSFR_READ      (0 << 12)
>> -#define QSPI_IFR_TFRTYP_TRSFR_READ_MEM  (1 << 12)
>> -#define QSPI_IFR_TFRTYP_TRSFR_WRITE     (2 << 12)
>> -#define QSPI_IFR_TFRTYP_TRSFR_WRITE_MEM (3 << 13)
>> +#define QSPI_IFR_SAMA5D2_WRITE_TRSFR	BIT(13)
> 
> Can you define QSPI_IFR_TFRTYP_MEM (bit 12) even if it's not used yet?

Shouldn't be introduced with the dir map support?
Boris Brezillon Feb. 2, 2019, 1:27 p.m. UTC | #3
On Sat, 2 Feb 2019 08:46:38 +0000
<Tudor.Ambarus@microchip.com> wrote:

> On 02/02/2019 09:13 AM, Boris Brezillon wrote:
> > On Sat, 2 Feb 2019 04:07:33 +0000
> > <Tudor.Ambarus@microchip.com> wrote:
> >   
> >> From: Tudor Ambarus <tudor.ambarus@microchip.com>
> >>
> >> Remove NOP when setting read transfer type. Remove useless
> >> setting of write transfer type when
> >> op->data.dir == SPI_MEM_DATA_IN && !op->data.nbytes.
> >>
> >> QSPI_IFR_TFRTYP_TRSFR_WRITE is specific just to sama5d2 qspi,
> >> rename it to QSPI_IFR_SAMA5D2_WRITE_TRSFR.
> >>
> >> Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
> >> ---
> >> v3: new patch
> >>
> >>  drivers/spi/atmel-quadspi.c | 12 +++---------
> >>  1 file changed, 3 insertions(+), 9 deletions(-)
> >>
> >> diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
> >> index d26d4cd0e36b..bfa5f5e92d96 100644
> >> --- a/drivers/spi/atmel-quadspi.c
> >> +++ b/drivers/spi/atmel-quadspi.c
> >> @@ -113,11 +113,7 @@
> >>  #define QSPI_IFR_OPTL_4BIT              (2 << 8)
> >>  #define QSPI_IFR_OPTL_8BIT              (3 << 8)
> >>  #define QSPI_IFR_ADDRL                  BIT(10)
> >> -#define QSPI_IFR_TFRTYP_MASK            GENMASK(13, 12)
> >> -#define QSPI_IFR_TFRTYP_TRSFR_READ      (0 << 12)
> >> -#define QSPI_IFR_TFRTYP_TRSFR_READ_MEM  (1 << 12)
> >> -#define QSPI_IFR_TFRTYP_TRSFR_WRITE     (2 << 12)
> >> -#define QSPI_IFR_TFRTYP_TRSFR_WRITE_MEM (3 << 13)
> >> +#define QSPI_IFR_SAMA5D2_WRITE_TRSFR	BIT(13)  
> > 
> > Can you define QSPI_IFR_TFRTYP_MEM (bit 12) even if it's not used yet?  
> 
> Shouldn't be introduced with the dir map support?

I like when all regs/reg-fields are defined, even if they're not used.
In this case, you're cleary splitting the TFRTYP_TRSFR_ bitfields in 2:
one bit encoding the mem/reg transfer type and one bit encoding the
direction of the transfer (read/write). Just think it's better to add
bit 12 definition now.
diff mbox series

Patch

diff --git a/drivers/spi/atmel-quadspi.c b/drivers/spi/atmel-quadspi.c
index d26d4cd0e36b..bfa5f5e92d96 100644
--- a/drivers/spi/atmel-quadspi.c
+++ b/drivers/spi/atmel-quadspi.c
@@ -113,11 +113,7 @@ 
 #define QSPI_IFR_OPTL_4BIT              (2 << 8)
 #define QSPI_IFR_OPTL_8BIT              (3 << 8)
 #define QSPI_IFR_ADDRL                  BIT(10)
-#define QSPI_IFR_TFRTYP_MASK            GENMASK(13, 12)
-#define QSPI_IFR_TFRTYP_TRSFR_READ      (0 << 12)
-#define QSPI_IFR_TFRTYP_TRSFR_READ_MEM  (1 << 12)
-#define QSPI_IFR_TFRTYP_TRSFR_WRITE     (2 << 12)
-#define QSPI_IFR_TFRTYP_TRSFR_WRITE_MEM (3 << 13)
+#define QSPI_IFR_SAMA5D2_WRITE_TRSFR	BIT(13)
 #define QSPI_IFR_CRM                    BIT(14)
 #define QSPI_IFR_NBDUM_MASK             GENMASK(20, 16)
 #define QSPI_IFR_NBDUM(n)               (((n) << 16) & QSPI_IFR_NBDUM_MASK)
@@ -273,10 +269,8 @@  static int atmel_qspi_exec_op(struct spi_mem *mem, const struct spi_mem_op *op)
 	if (op->data.nbytes)
 		ifr |= QSPI_IFR_DATAEN;
 
-	if (op->data.dir == SPI_MEM_DATA_IN && op->data.nbytes)
-		ifr |= QSPI_IFR_TFRTYP_TRSFR_READ;
-	else
-		ifr |= QSPI_IFR_TFRTYP_TRSFR_WRITE;
+	if (op->data.dir == SPI_MEM_DATA_OUT)
+		ifr |= QSPI_IFR_SAMA5D2_WRITE_TRSFR;
 
 	/* Clear pending interrupts */
 	(void)readl_relaxed(base + QSPI_SR);