@@ -39,9 +39,9 @@
#define SPI_CTAR(x) (0x0c + (((x) & GENMASK(1, 0)) * 4))
#define SPI_CTAR_FMSZ(x) (((x) << 27) & GENMASK(30, 27))
-#define SPI_CTAR_CPOL(x) (((x) << 26) & GENMASK(26, 26))
-#define SPI_CTAR_CPHA(x) (((x) << 25) & GENMASK(25, 25))
-#define SPI_CTAR_LSBFE(x) (((x) << 24) & GENMASK(24, 24))
+#define SPI_CTAR_CPOL BIT(26)
+#define SPI_CTAR_CPHA BIT(25)
+#define SPI_CTAR_LSBFE BIT(24)
#define SPI_CTAR_PCSSCK(x) (((x) << 22) & GENMASK(23, 22))
#define SPI_CTAR_PASC(x) (((x) << 20) & GENMASK(21, 20))
#define SPI_CTAR_PDT(x) (((x) << 18) & GENMASK(19, 18))
@@ -587,7 +587,7 @@ static void dspi_tcfq_write(struct fsl_dspi *dspi)
*/
u32 data = dspi_pop_tx(dspi);
- if (dspi->cur_chip->ctar_val & SPI_CTAR_LSBFE(1)) {
+ if (dspi->cur_chip->ctar_val & SPI_CTAR_LSBFE) {
/* LSB */
tx_fifo_write(dspi, data & 0xFFFF);
tx_fifo_write(dspi, data >> 16);
@@ -791,18 +791,22 @@ static int dspi_setup(struct spi_device *spi)
/* Set After SCK delay scale values */
ns_delay_scale(&pasc, &asc, sck_cs_delay, clkrate);
- chip->ctar_val = SPI_CTAR_CPOL(spi->mode & SPI_CPOL ? 1 : 0)
- | SPI_CTAR_CPHA(spi->mode & SPI_CPHA ? 1 : 0);
+ chip->ctar_val = 0;
+ if (spi->mode & SPI_CPOL)
+ chip->ctar_val |= SPI_CTAR_CPOL;
+ if (spi->mode & SPI_CPHA)
+ chip->ctar_val |= SPI_CTAR_CPHA;
if (!spi_controller_is_slave(dspi->master)) {
- chip->ctar_val |= SPI_CTAR_LSBFE(spi->mode &
- SPI_LSB_FIRST ? 1 : 0)
- | SPI_CTAR_PCSSCK(pcssck)
- | SPI_CTAR_CSSCK(cssck)
- | SPI_CTAR_PASC(pasc)
- | SPI_CTAR_ASC(asc)
- | SPI_CTAR_PBR(pbr)
- | SPI_CTAR_BR(br);
+ chip->ctar_val |= SPI_CTAR_PCSSCK(pcssck) |
+ SPI_CTAR_CSSCK(cssck) |
+ SPI_CTAR_PASC(pasc) |
+ SPI_CTAR_ASC(asc) |
+ SPI_CTAR_PBR(pbr) |
+ SPI_CTAR_BR(br);
+
+ if (spi->mode & SPI_LSB_FIRST)
+ chip->ctar_val |= SPI_CTAR_LSBFE;
}
spi_set_ctldata(spi, chip);
@@ -968,9 +972,10 @@ static const struct regmap_config dspi_xspi_regmap_config[] = {
static void dspi_init(struct fsl_dspi *dspi)
{
- unsigned int mcr = SPI_MCR_PCSIS |
- (dspi->devtype_data->xspi_mode ? SPI_MCR_XSPI : 0);
+ unsigned int mcr = SPI_MCR_PCSIS;
+ if (dspi->devtype_data->xspi_mode)
+ mcr |= SPI_MCR_XSPI;
if (!spi_controller_is_slave(dspi->master))
mcr |= SPI_MCR_MASTER;
These are macros that accept 0 or 1 as argument (a boolean value). Their use encourages the abuse of complex ternary operations inside their argument list, which detracts from the code readability. Replace these with simple if-else statements. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> --- drivers/spi/spi-fsl-dspi.c | 37 +++++++++++++++++++++---------------- 1 file changed, 21 insertions(+), 16 deletions(-)