@@ -145,242 +145,6 @@ static char *next(
return ptr + offset;
}
-/*
- * Format the log. The caller provides either a buftarg which is used to access
- * the log via buffers or a direct pointer to a buffer that encapsulates the
- * entire log.
- */
-int
-libxfs_log_clear(
- struct xfs_buftarg *btp,
- char *dptr,
- xfs_daddr_t start,
- uint length, /* basic blocks */
- uuid_t *fs_uuid,
- int version,
- int sunit, /* bytes */
- int fmt,
- int cycle,
- bool max)
-{
- struct xfs_buf *bp = NULL;
- int len;
- xfs_lsn_t lsn;
- xfs_lsn_t tail_lsn;
- xfs_daddr_t blk;
- xfs_daddr_t end_blk;
- char *ptr;
-
- if (((btp && dptr) || (!btp && !dptr)) ||
- (btp && !btp->dev) || !fs_uuid)
- return -EINVAL;
-
- /* first zero the log */
- if (btp)
- libxfs_device_zero(btp, start, length);
- else
- memset(dptr, 0, BBTOB(length));
-
- /*
- * Initialize the log record length and LSNs. XLOG_INIT_CYCLE is a
- * special reset case where we only write a single record where the lsn
- * and tail_lsn match. Otherwise, the record lsn starts at block 0 of
- * the specified cycle and points tail_lsn at the last record of the
- * previous cycle.
- */
- len = ((version == 2) && sunit) ? BTOBB(sunit) : 2;
- len = max(len, 2);
- lsn = xlog_assign_lsn(cycle, 0);
- if (cycle == XLOG_INIT_CYCLE)
- tail_lsn = lsn;
- else
- tail_lsn = xlog_assign_lsn(cycle - 1, length - len);
-
- /* write out the first log record */
- ptr = dptr;
- if (btp) {
- bp = libxfs_getbufr(btp, start, len);
- ptr = bp->b_addr;
- }
- libxfs_log_header(ptr, fs_uuid, version, sunit, fmt, lsn, tail_lsn,
- next, bp);
- if (bp) {
- bp->b_flags |= LIBXFS_B_DIRTY;
- libxfs_putbufr(bp);
- }
-
- /*
- * There's nothing else to do if this is a log reset. The kernel detects
- * the rest of the log is zeroed and starts at cycle 1.
- */
- if (cycle == XLOG_INIT_CYCLE)
- return 0;
-
- /*
- * Bump the record size for a full log format if the caller allows it.
- * This is primarily for performance reasons and most callers don't care
- * about record size since the log is clean after we're done.
- */
- if (max)
- len = BTOBB(BDSTRAT_SIZE);
-
- /*
- * Otherwise, fill everything beyond the initial record with records of
- * the previous cycle so the kernel head/tail detection works correctly.
- *
- * We don't particularly care about the record size or content here.
- * It's only important that the headers are in place such that the
- * kernel finds 1.) a clean log and 2.) the correct current cycle value.
- * Therefore, bump up the record size to the max to use larger I/Os and
- * improve performance.
- */
- cycle--;
- blk = start + len;
- if (dptr)
- dptr += BBTOB(len);
- end_blk = start + length;
-
- len = min(end_blk - blk, len);
- while (blk < end_blk) {
- lsn = xlog_assign_lsn(cycle, blk - start);
- tail_lsn = xlog_assign_lsn(cycle, blk - start - len);
-
- ptr = dptr;
- if (btp) {
- bp = libxfs_getbufr(btp, blk, len);
- ptr = bp->b_addr;
- }
- /*
- * Note: pass the full buffer length as the sunit to initialize
- * the entire buffer.
- */
- libxfs_log_header(ptr, fs_uuid, version, BBTOB(len), fmt, lsn,
- tail_lsn, next, bp);
- if (bp) {
- bp->b_flags |= LIBXFS_B_DIRTY;
- libxfs_putbufr(bp);
- }
-
- blk += len;
- if (dptr)
- dptr += BBTOB(len);
- len = min(end_blk - blk, len);
- }
-
- return 0;
-}
-
-int
-libxfs_log_header(
- char *caddr,
- uuid_t *fs_uuid,
- int version,
- int sunit,
- int fmt,
- xfs_lsn_t lsn,
- xfs_lsn_t tail_lsn,
- libxfs_get_block_t *nextfunc,
- void *private)
-{
- xlog_rec_header_t *head = (xlog_rec_header_t *)caddr;
- char *p = caddr;
- __be32 cycle_lsn;
- int i, len;
- int hdrs = 1;
-
- if (lsn == NULLCOMMITLSN)
- lsn = xlog_assign_lsn(XLOG_INIT_CYCLE, 0);
- if (tail_lsn == NULLCOMMITLSN)
- tail_lsn = lsn;
-
- len = ((version == 2) && sunit) ? BTOBB(sunit) : 1;
-
- memset(p, 0, BBSIZE);
- head->h_magicno = cpu_to_be32(XLOG_HEADER_MAGIC_NUM);
- head->h_cycle = cpu_to_be32(CYCLE_LSN(lsn));
- head->h_version = cpu_to_be32(version);
- head->h_crc = cpu_to_le32(0);
- head->h_prev_block = cpu_to_be32(-1);
- head->h_num_logops = cpu_to_be32(1);
- head->h_fmt = cpu_to_be32(fmt);
- head->h_size = cpu_to_be32(max(sunit, XLOG_BIG_RECORD_BSIZE));
-
- head->h_lsn = cpu_to_be64(lsn);
- head->h_tail_lsn = cpu_to_be64(tail_lsn);
-
- memcpy(&head->h_fs_uuid, fs_uuid, sizeof(uuid_t));
-
- /*
- * The kernel expects to see either a log record header magic value or
- * the LSN cycle at the top of every log block. The first word of each
- * non-header block is copied to the record headers and replaced with
- * the cycle value (see xlog_[un]pack_data() and xlog_get_cycle() for
- * details).
- *
- * Even though we only ever write an unmount record (one block), we
- * support writing log records up to the max log buffer size of 256k to
- * improve log format performance. This means a record can require up
- * to 8 headers (1 rec. header + 7 ext. headers) for the packed cycle
- * data (each header supports 32k of data).
- */
- cycle_lsn = CYCLE_LSN_DISK(head->h_lsn);
- if (version == 2 && sunit > XLOG_HEADER_CYCLE_SIZE) {
- hdrs = sunit / XLOG_HEADER_CYCLE_SIZE;
- if (sunit % XLOG_HEADER_CYCLE_SIZE)
- hdrs++;
- }
-
- /*
- * A fixed number of extended headers is expected based on h_size. If
- * required, format those now so the unmount record is located
- * correctly.
- *
- * Since we only write an unmount record, we only need one h_cycle_data
- * entry for the unmount record block. The subsequent record data
- * blocks are zeroed, which means we can stamp them directly with the
- * cycle and zero the rest of the cycle data in the extended headers.
- */
- if (hdrs > 1) {
- for (i = 1; i < hdrs; i++) {
- p = nextfunc(p, BBSIZE, private);
- memset(p, 0, BBSIZE);
- /* xlog_rec_ext_header.xh_cycle */
- *(__be32 *)p = cycle_lsn;
- }
- }
-
- /*
- * The total length is the max of the stripe unit or 2 basic block
- * minimum (1 hdr blk + 1 data blk). The record length is the total
- * minus however many header blocks are required.
- */
- head->h_len = cpu_to_be32(max(BBTOB(2), sunit) - hdrs * BBSIZE);
-
- /*
- * Write out the unmount record, pack the first word into the record
- * header and stamp the block with the cycle.
- */
- p = nextfunc(p, BBSIZE, private);
- unmount_record(p);
-
- head->h_cycle_data[0] = *(__be32 *)p;
- *(__be32 *)p = cycle_lsn;
-
- /*
- * Finally, zero all remaining blocks in the record and stamp each with
- * the cycle. We don't need to pack any of these blocks because the
- * cycle data in the headers has already been zeroed.
- */
- len = max(len, hdrs + 1);
- for (i = hdrs + 1; i < len; i++) {
- p = nextfunc(p, BBSIZE, private);
- memset(p, 0, BBSIZE);
- *(__be32 *)p = cycle_lsn;
- }
-
- return BBTOB(len);
-}
-
/*
* Simple I/O (buffer cache) interface
*/
@@ -1601,3 +1365,240 @@ xfs_buf_delwri_submit(
return error;
}
+
+/*
+ * Format the log. The caller provides either a buftarg which is used to access
+ * the log via buffers or a direct pointer to a buffer that encapsulates the
+ * entire log.
+ */
+int
+libxfs_log_clear(
+ struct xfs_buftarg *btp,
+ char *dptr,
+ xfs_daddr_t start,
+ uint length, /* basic blocks */
+ uuid_t *fs_uuid,
+ int version,
+ int sunit, /* bytes */
+ int fmt,
+ int cycle,
+ bool max)
+{
+ struct xfs_buf *bp = NULL;
+ int len;
+ xfs_lsn_t lsn;
+ xfs_lsn_t tail_lsn;
+ xfs_daddr_t blk;
+ xfs_daddr_t end_blk;
+ char *ptr;
+
+ if (((btp && dptr) || (!btp && !dptr)) ||
+ (btp && !btp->dev) || !fs_uuid)
+ return -EINVAL;
+
+ /* first zero the log */
+ if (btp)
+ libxfs_device_zero(btp, start, length);
+ else
+ memset(dptr, 0, BBTOB(length));
+
+ /*
+ * Initialize the log record length and LSNs. XLOG_INIT_CYCLE is a
+ * special reset case where we only write a single record where the lsn
+ * and tail_lsn match. Otherwise, the record lsn starts at block 0 of
+ * the specified cycle and points tail_lsn at the last record of the
+ * previous cycle.
+ */
+ len = ((version == 2) && sunit) ? BTOBB(sunit) : 2;
+ len = max(len, 2);
+ lsn = xlog_assign_lsn(cycle, 0);
+ if (cycle == XLOG_INIT_CYCLE)
+ tail_lsn = lsn;
+ else
+ tail_lsn = xlog_assign_lsn(cycle - 1, length - len);
+
+ /* write out the first log record */
+ ptr = dptr;
+ if (btp) {
+ bp = libxfs_getbufr(btp, start, len);
+ ptr = bp->b_addr;
+ }
+ libxfs_log_header(ptr, fs_uuid, version, sunit, fmt, lsn, tail_lsn,
+ next, bp);
+ if (bp) {
+ bp->b_flags |= LIBXFS_B_DIRTY;
+ libxfs_putbufr(bp);
+ }
+
+ /*
+ * There's nothing else to do if this is a log reset. The kernel detects
+ * the rest of the log is zeroed and starts at cycle 1.
+ */
+ if (cycle == XLOG_INIT_CYCLE)
+ return 0;
+
+ /*
+ * Bump the record size for a full log format if the caller allows it.
+ * This is primarily for performance reasons and most callers don't care
+ * about record size since the log is clean after we're done.
+ */
+ if (max)
+ len = BTOBB(BDSTRAT_SIZE);
+
+ /*
+ * Otherwise, fill everything beyond the initial record with records of
+ * the previous cycle so the kernel head/tail detection works correctly.
+ *
+ * We don't particularly care about the record size or content here.
+ * It's only important that the headers are in place such that the
+ * kernel finds 1.) a clean log and 2.) the correct current cycle value.
+ * Therefore, bump up the record size to the max to use larger I/Os and
+ * improve performance.
+ */
+ cycle--;
+ blk = start + len;
+ if (dptr)
+ dptr += BBTOB(len);
+ end_blk = start + length;
+
+ len = min(end_blk - blk, len);
+ while (blk < end_blk) {
+ lsn = xlog_assign_lsn(cycle, blk - start);
+ tail_lsn = xlog_assign_lsn(cycle, blk - start - len);
+
+ ptr = dptr;
+ if (btp) {
+ bp = libxfs_getbufr(btp, blk, len);
+ ptr = bp->b_addr;
+ }
+ /*
+ * Note: pass the full buffer length as the sunit to initialize
+ * the entire buffer.
+ */
+ libxfs_log_header(ptr, fs_uuid, version, BBTOB(len), fmt, lsn,
+ tail_lsn, next, bp);
+ if (bp) {
+ bp->b_flags |= LIBXFS_B_DIRTY;
+ libxfs_putbufr(bp);
+ }
+
+ blk += len;
+ if (dptr)
+ dptr += BBTOB(len);
+ len = min(end_blk - blk, len);
+ }
+
+ return 0;
+}
+
+int
+libxfs_log_header(
+ char *caddr,
+ uuid_t *fs_uuid,
+ int version,
+ int sunit,
+ int fmt,
+ xfs_lsn_t lsn,
+ xfs_lsn_t tail_lsn,
+ libxfs_get_block_t *nextfunc,
+ void *private)
+{
+ xlog_rec_header_t *head = (xlog_rec_header_t *)caddr;
+ char *p = caddr;
+ __be32 cycle_lsn;
+ int i, len;
+ int hdrs = 1;
+
+ if (lsn == NULLCOMMITLSN)
+ lsn = xlog_assign_lsn(XLOG_INIT_CYCLE, 0);
+ if (tail_lsn == NULLCOMMITLSN)
+ tail_lsn = lsn;
+
+ len = ((version == 2) && sunit) ? BTOBB(sunit) : 1;
+
+ memset(p, 0, BBSIZE);
+ head->h_magicno = cpu_to_be32(XLOG_HEADER_MAGIC_NUM);
+ head->h_cycle = cpu_to_be32(CYCLE_LSN(lsn));
+ head->h_version = cpu_to_be32(version);
+ head->h_crc = cpu_to_le32(0);
+ head->h_prev_block = cpu_to_be32(-1);
+ head->h_num_logops = cpu_to_be32(1);
+ head->h_fmt = cpu_to_be32(fmt);
+ head->h_size = cpu_to_be32(max(sunit, XLOG_BIG_RECORD_BSIZE));
+
+ head->h_lsn = cpu_to_be64(lsn);
+ head->h_tail_lsn = cpu_to_be64(tail_lsn);
+
+ memcpy(&head->h_fs_uuid, fs_uuid, sizeof(uuid_t));
+
+ /*
+ * The kernel expects to see either a log record header magic value or
+ * the LSN cycle at the top of every log block. The first word of each
+ * non-header block is copied to the record headers and replaced with
+ * the cycle value (see xlog_[un]pack_data() and xlog_get_cycle() for
+ * details).
+ *
+ * Even though we only ever write an unmount record (one block), we
+ * support writing log records up to the max log buffer size of 256k to
+ * improve log format performance. This means a record can require up
+ * to 8 headers (1 rec. header + 7 ext. headers) for the packed cycle
+ * data (each header supports 32k of data).
+ */
+ cycle_lsn = CYCLE_LSN_DISK(head->h_lsn);
+ if (version == 2 && sunit > XLOG_HEADER_CYCLE_SIZE) {
+ hdrs = sunit / XLOG_HEADER_CYCLE_SIZE;
+ if (sunit % XLOG_HEADER_CYCLE_SIZE)
+ hdrs++;
+ }
+
+ /*
+ * A fixed number of extended headers is expected based on h_size. If
+ * required, format those now so the unmount record is located
+ * correctly.
+ *
+ * Since we only write an unmount record, we only need one h_cycle_data
+ * entry for the unmount record block. The subsequent record data
+ * blocks are zeroed, which means we can stamp them directly with the
+ * cycle and zero the rest of the cycle data in the extended headers.
+ */
+ if (hdrs > 1) {
+ for (i = 1; i < hdrs; i++) {
+ p = nextfunc(p, BBSIZE, private);
+ memset(p, 0, BBSIZE);
+ /* xlog_rec_ext_header.xh_cycle */
+ *(__be32 *)p = cycle_lsn;
+ }
+ }
+
+ /*
+ * The total length is the max of the stripe unit or 2 basic block
+ * minimum (1 hdr blk + 1 data blk). The record length is the total
+ * minus however many header blocks are required.
+ */
+ head->h_len = cpu_to_be32(max(BBTOB(2), sunit) - hdrs * BBSIZE);
+
+ /*
+ * Write out the unmount record, pack the first word into the record
+ * header and stamp the block with the cycle.
+ */
+ p = nextfunc(p, BBSIZE, private);
+ unmount_record(p);
+
+ head->h_cycle_data[0] = *(__be32 *)p;
+ *(__be32 *)p = cycle_lsn;
+
+ /*
+ * Finally, zero all remaining blocks in the record and stamp each with
+ * the cycle. We don't need to pack any of these blocks because the
+ * cycle data in the headers has already been zeroed.
+ */
+ len = max(len, hdrs + 1);
+ for (i = hdrs + 1; i < len; i++) {
+ p = nextfunc(p, BBSIZE, private);
+ memset(p, 0, BBSIZE);
+ *(__be32 *)p = cycle_lsn;
+ }
+
+ return BBTOB(len);
+}
+