diff mbox

x86, pci: Add quirk for unsizeable Broadwell EP bar

Message ID 20160210222333.GK3696@two.firstfloor.org (mailing list archive)
State New, archived
Delegated to: Bjorn Helgaas
Headers show

Commit Message

Andi Kleen Feb. 10, 2016, 10:23 p.m. UTC
On Fri, Feb 05, 2016 at 10:34:27AM -0600, Bjorn Helgaas wrote:
> On Fri, Feb 05, 2016 at 04:36:17AM +0100, Andi Kleen wrote:
> > > > But would actually anything use it?
> > > 
> > > You mean, would anything actually use the lspci output?  I don't know,
> > > but why would we want it to print garbage?
> > 
> > In he kernel. I don't think lspci is that interesting.
> > > 
> > > And the kernel certainly uses the struct resource.  Setting
> > > IORESOURCE_PCI_FIXED is not a way of saying "please ignore this
> > > resource."
> > 
> > There is already another quirk that uses the same technique to handle
> > a bad bar. I also didn't notice any bad side effects. Again what would it be
> > used for?
> 
> I suppose you mean pci_siemens_interrupt_controller(), added by
> 73a74ed3a6f8 ("PCI: i386: fixup for Siemens Nixdorf AG FSC
> Multiprocessor Interrupt Controllers")?
> 
> Here are the problems I see:

All good points. I changed the patch to use a new flag
IORESOURCE_PCI_IGNORE that skips the whole bar process
(except for the BAR size, which are ok in my case at least).

Also fixed to handle all BARs.

Does that look better?

------
x86, pci: Add quirk for unsizeable Broadwell EP bar
    
The Home Agent and PCU PCI devices in Broadwell-EP have a BAR that returns a
non zero value when read, but is still not sizeable (because it doesn't
exist).  This causes several [Firmware error] messages at boot. It does
not cause any functional problems, as the devices really have no BARs.

Add a PCI quirk to shut off the messages.

Since the message is printed before the normal header fixup add EARLY
fixups. This requires changing the PCI probe code to not override
the resource flags unconditionally, so that the quirk can set flags.

(I believe that's ok, they should be always zero before, but please double
check)

I used a new resource flag that causes the BAR to be ignored

v2: Handle all BARs, not just BAR0 (Chaohong Guo)
Switch over to using IORESOURCE_PCI_IGNORE over FIXED
Signed-off-by: Andi Kleen <ak@linux.intel.com>

--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

Bjorn Helgaas Feb. 11, 2016, 2:20 p.m. UTC | #1
On Wed, Feb 10, 2016 at 11:23:33PM +0100, Andi Kleen wrote:
> On Fri, Feb 05, 2016 at 10:34:27AM -0600, Bjorn Helgaas wrote:
> > On Fri, Feb 05, 2016 at 04:36:17AM +0100, Andi Kleen wrote:
> > > > > But would actually anything use it?
> > > > 
> > > > You mean, would anything actually use the lspci output?  I don't know,
> > > > but why would we want it to print garbage?
> > > 
> > > In he kernel. I don't think lspci is that interesting.
> > > > 
> > > > And the kernel certainly uses the struct resource.  Setting
> > > > IORESOURCE_PCI_FIXED is not a way of saying "please ignore this
> > > > resource."
> > > 
> > > There is already another quirk that uses the same technique to handle
> > > a bad bar. I also didn't notice any bad side effects. Again what would it be
> > > used for?
> > 
> > I suppose you mean pci_siemens_interrupt_controller(), added by
> > 73a74ed3a6f8 ("PCI: i386: fixup for Siemens Nixdorf AG FSC
> > Multiprocessor Interrupt Controllers")?
> > 
> > Here are the problems I see:
> 
> All good points. I changed the patch to use a new flag
> IORESOURCE_PCI_IGNORE that skips the whole bar process
> (except for the BAR size, which are ok in my case at least).
> 
> Also fixed to handle all BARs.
> 
> Does that look better?
> 
> ------
> x86, pci: Add quirk for unsizeable Broadwell EP bar
>     
> The Home Agent and PCU PCI devices in Broadwell-EP have a BAR that returns a
> non zero value when read, but is still not sizeable (because it doesn't
> exist).  This causes several [Firmware error] messages at boot. It does
> not cause any functional problems, as the devices really have no BARs.
> 
> Add a PCI quirk to shut off the messages.
> 
> Since the message is printed before the normal header fixup add EARLY
> fixups. This requires changing the PCI probe code to not override
> the resource flags unconditionally, so that the quirk can set flags.
> 
> (I believe that's ok, they should be always zero before, but please double
> check)
> 
> I used a new resource flag that causes the BAR to be ignored
> 
> v2: Handle all BARs, not just BAR0 (Chaohong Guo)
> Switch over to using IORESOURCE_PCI_IGNORE over FIXED
> Signed-off-by: Andi Kleen <ak@linux.intel.com>
> 
> diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
> index e585655..837acb7 100644
> --- a/arch/x86/pci/fixup.c
> +++ b/arch/x86/pci/fixup.c
> @@ -540,3 +540,18 @@ static void twinhead_reserve_killing_zone(struct pci_dev *dev)
>          }
>  }
>  DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone);
> +
> +/*
> + * Intel Broadwell EP. Prevent reading/updating BARs on Home Agent and PCU devices
> + * which are not real BARs, but still return non-null.
> + * This prevents a harmless warning message at boot.
> + */
> +static void pci_bdwep_ha_bar(struct pci_dev *dev)
> +{
> +	int i;
> +
> +	for (i = 0; i < 5; i++)
> +		dev->resource[i].flags |= IORESOURCE_PCI_IGNORE;
> +}
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_ha_bar);
> +DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_ha_bar);
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 6d7ab9b..7c12e6d 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -214,7 +214,9 @@ int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
>  		l = 0;
>  
>  	if (type == pci_bar_unknown) {
> -		res->flags = decode_bar(dev, l);
> +		res->flags |= decode_bar(dev, l);
> +		if (res->flags & IORESOURCE_PCI_IGNORE)
> +			goto out;

Sorry, I really don't like this either.  For one thing, if these
registers are not BARs, I don't want to even read them.  I don't want
the possible side-effects from reading the register, and I don't want
to worry about what happens when we feed garbage to decode_bar().

But more importantly, I don't want to define a whole new IORESOURCE_*
flag just for this, and I don't want places that use resources to have
to check for the new flag.

There's lots of code that assumes "res->flags == 0" means "this
resource does not correspond to a BAR".  For examples, look at the
output of this:

  git grep -e 'if (!r.*->flags'

These Broadwell-EP resources don't correspond to valid BARs, so they
should look just like the resources we have for unimplemented BARs.  I
think the cleanest way to accomplish this is to make the registers
look like unimplemented BARs, i.e., by making pci_read_config_dword()
read zero.

I think it should be pretty easy to define your own pci_ops that
special-cases these registers on these devices and falls back to the
existing raw_pci_read() for everything else, and you could probably
install those ops with an early quirk.

We already do something very similar for quirk_pcie_aspm_ops.

>  		res->flags |= IORESOURCE_SIZEALIGN;
>  		if (res->flags & IORESOURCE_IO) {
>  			l64 = l & PCI_BASE_ADDRESS_IO_MASK;
> diff --git a/include/linux/ioport.h b/include/linux/ioport.h
> index 24bea08..5262102 100644
> --- a/include/linux/ioport.h
> +++ b/include/linux/ioport.h
> @@ -104,7 +104,7 @@ struct resource {
>  
>  /* PCI control bits.  Shares IORESOURCE_BITS with above PCI ROM.  */
>  #define IORESOURCE_PCI_FIXED		(1<<4)	/* Do not move resource */
> -
> +#define IORESOURCE_PCI_IGNORE		(1<<5)	/* Ignore resource */
>  
>  /* helpers to define resources */
>  #define DEFINE_RES_NAMED(_start, _size, _name, _flags)			\
--
To unsubscribe from this list: send the line "unsubscribe linux-pci" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/x86/pci/fixup.c b/arch/x86/pci/fixup.c
index e585655..837acb7 100644
--- a/arch/x86/pci/fixup.c
+++ b/arch/x86/pci/fixup.c
@@ -540,3 +540,18 @@  static void twinhead_reserve_killing_zone(struct pci_dev *dev)
         }
 }
 DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_INTEL, 0x27B9, twinhead_reserve_killing_zone);
+
+/*
+ * Intel Broadwell EP. Prevent reading/updating BARs on Home Agent and PCU devices
+ * which are not real BARs, but still return non-null.
+ * This prevents a harmless warning message at boot.
+ */
+static void pci_bdwep_ha_bar(struct pci_dev *dev)
+{
+	int i;
+
+	for (i = 0; i < 5; i++)
+		dev->resource[i].flags |= IORESOURCE_PCI_IGNORE;
+}
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fa0, pci_bdwep_ha_bar);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_INTEL, 0x6fc0, pci_bdwep_ha_bar);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 6d7ab9b..7c12e6d 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -214,7 +214,9 @@  int __pci_read_base(struct pci_dev *dev, enum pci_bar_type type,
 		l = 0;
 
 	if (type == pci_bar_unknown) {
-		res->flags = decode_bar(dev, l);
+		res->flags |= decode_bar(dev, l);
+		if (res->flags & IORESOURCE_PCI_IGNORE)
+			goto out;
 		res->flags |= IORESOURCE_SIZEALIGN;
 		if (res->flags & IORESOURCE_IO) {
 			l64 = l & PCI_BASE_ADDRESS_IO_MASK;
diff --git a/include/linux/ioport.h b/include/linux/ioport.h
index 24bea08..5262102 100644
--- a/include/linux/ioport.h
+++ b/include/linux/ioport.h
@@ -104,7 +104,7 @@  struct resource {
 
 /* PCI control bits.  Shares IORESOURCE_BITS with above PCI ROM.  */
 #define IORESOURCE_PCI_FIXED		(1<<4)	/* Do not move resource */
-
+#define IORESOURCE_PCI_IGNORE		(1<<5)	/* Ignore resource */
 
 /* helpers to define resources */
 #define DEFINE_RES_NAMED(_start, _size, _name, _flags)			\