diff mbox series

[1/4] dt-bindings: pci: add bindings for brcmstb's PCIe device

Message ID 20191106214527.18736-2-nsaenzjulienne@suse.de (mailing list archive)
State New, archived
Headers show
Series Raspberry Pi 4 PCIe support | expand

Commit Message

Nicolas Saenz Julienne Nov. 6, 2019, 9:45 p.m. UTC
From: Jim Quinlan <james.quinlan@broadcom.com>

The DT bindings description of the brcmstb PCIe device is described.
This node can only be used for now on the Raspberry Pi 4.

This was based on Jim's original submission[1], converted to yaml and
adapted to the RPi4 case.

[1] https://patchwork.kernel.org/patch/10605937/

Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 .../bindings/pci/brcm,stb-pcie.yaml           | 116 ++++++++++++++++++
 1 file changed, 116 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml

Comments

Andrew Murray Nov. 7, 2019, 10:32 a.m. UTC | #1
On Wed, Nov 06, 2019 at 10:45:23PM +0100, Nicolas Saenz Julienne wrote:
> From: Jim Quinlan <james.quinlan@broadcom.com>

Nit: Looking at past git history, ideally the patch subject would be
'dt-bindings: *PCI*: *A*dd bindings for brcmstb's PCIe.

> 
> The DT bindings description of the brcmstb PCIe device is described.
> This node can only be used for now on the Raspberry Pi 4.
> 
> This was based on Jim's original submission[1], converted to yaml and
> adapted to the RPi4 case.

Thanks for picking this up.

> 
> [1] https://patchwork.kernel.org/patch/10605937/
> 
> Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> ---
>  .../bindings/pci/brcm,stb-pcie.yaml           | 116 ++++++++++++++++++
>  1 file changed, 116 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> new file mode 100644
> index 000000000000..0b81c26f8568
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> @@ -0,0 +1,116 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Brcmstb PCIe Host Controller Device Tree Bindings
> +
> +maintainers:
> +  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> +
> +properties:
> +  compatible:
> +    const: brcm,bcm2711-pcie # The Raspberry Pi 4
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - description: PCIe host controller
> +      - description: builtin MSI controller
> +
> +  interrupt-names:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - const: pcie
> +      - const: msi
> +
> +  "#address-cells":
> +    const: 3
> +
> +  "#size-cells":
> +    const: 2
> +
> +  "#interrupt-cells":
> +    const: 1
> +
> +  interrupt-map-mask: true
> +
> +  interrupt-map: true
> +
> +  ranges: true
> +
> +  dma-ranges: true
> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: sw_pcie
> +
> +  msi-controller:
> +    description: Identifies the node as an MSI controller.
> +    type: boolean
> +
> +  msi-parent:
> +    description: MSI controller the device is capable of using.
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +
> +  linux,pci-domain:
> +    description: PCI domain ID. Should be unique for each host controller.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +  brcm,enable-ssc:
> +    description: Indicates usage of spread-spectrum clocking.
> +    type: boolean
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#address-cells"
> +  - "#size-cells"
> +  - "#interrupt-cells"
> +  - interrupt-map-mask
> +  - interrupt-map
> +  - ranges
> +  - dma-ranges
> +  - linux,pci-domain

I don't think pci-domain is *required* is it?

Thanks,

Andrew Murray

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    scb {
> +            #address-cells = <2>;
> +            #size-cells = <1>;
> +            pcie0: pcie@7d500000 {
> +                    compatible = "brcm,bcm2711-pcie";
> +                    reg = <0x0 0x7d500000 0x9310>;
> +                    #address-cells = <3>;
> +                    #size-cells = <2>;
> +                    #interrupt-cells = <1>;
> +                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> +                                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> +                    interrupt-names = "pcie", "msi";
> +                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
> +                                     0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
> +                                     0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
> +                                     0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
> +                    msi-parent = <&pcie0>;
> +                    msi-controller;
> +                    ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
> +                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
> +                    linux,pci-domain = <0>;
> +                    brcm,enable-ssc;
> +            };
> +    };
> -- 
> 2.23.0
>
Nicolas Saenz Julienne Nov. 7, 2019, 10:53 a.m. UTC | #2
On Thu, 2019-11-07 at 10:32 +0000, Andrew Murray wrote:
> On Wed, Nov 06, 2019 at 10:45:23PM +0100, Nicolas Saenz Julienne wrote:
> > From: Jim Quinlan <james.quinlan@broadcom.com>
> 
> Nit: Looking at past git history, ideally the patch subject would be
> 'dt-bindings: *PCI*: *A*dd bindings for brcmstb's PCIe.

Noted.

> > The DT bindings description of the brcmstb PCIe device is described.
> > This node can only be used for now on the Raspberry Pi 4.
> > 
> > This was based on Jim's original submission[1], converted to yaml and
> > adapted to the RPi4 case.
> 
> Thanks for picking this up.
> 
> > [1] https://patchwork.kernel.org/patch/10605937/
> > 
> > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> > Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > ---
> >  .../bindings/pci/brcm,stb-pcie.yaml           | 116 ++++++++++++++++++
> >  1 file changed, 116 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > new file mode 100644
> > index 000000000000..0b81c26f8568
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > @@ -0,0 +1,116 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Brcmstb PCIe Host Controller Device Tree Bindings
> > +
> > +maintainers:
> > +  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > +
> > +properties:
> > +  compatible:
> > +    const: brcm,bcm2711-pcie # The Raspberry Pi 4
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    maxItems: 2
> > +    items:
> > +      - description: PCIe host controller
> > +      - description: builtin MSI controller
> > +
> > +  interrupt-names:
> > +    minItems: 1
> > +    maxItems: 2
> > +    items:
> > +      - const: pcie
> > +      - const: msi
> > +
> > +  "#address-cells":
> > +    const: 3
> > +
> > +  "#size-cells":
> > +    const: 2
> > +
> > +  "#interrupt-cells":
> > +    const: 1
> > +
> > +  interrupt-map-mask: true
> > +
> > +  interrupt-map: true
> > +
> > +  ranges: true
> > +
> > +  dma-ranges: true
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    items:
> > +      - const: sw_pcie
> > +
> > +  msi-controller:	/* We use the domain number as our controller number */
> > 	pcie->id = of_get_pci_domain_nr(dn);
> > 	if (pcie->id < 0)
> > 		return pcie->id;
> > +    description: Identifies the node as an MSI controller.
> > +    type: boolean
> > +
> > +  msi-parent:
> > +    description: MSI controller the device is capable of using.
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +
> > +  linux,pci-domain:
> > +    description: PCI domain ID. Should be unique for each host controller.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > +  brcm,enable-ssc:
> > +    description: Indicates usage of spread-spectrum clocking.
> > +    type: boolean
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - "#address-cells"
> > +  - "#size-cells"
> > +  - "#interrupt-cells"
> > +  - interrupt-map-mask
> > +  - interrupt-map
> > +  - ranges
> > +  - dma-ranges
> > +  - linux,pci-domain
> 
> I don't think pci-domain is *required* is it?

You're right, I missed that one. It was needed on some of the STB devices but
not in the RPi4's case. I'll remove it in v2.

Regards,
Nicolas
Rob Herring (Arm) Nov. 13, 2019, 4:15 a.m. UTC | #3
On Wed, Nov 06, 2019 at 10:45:23PM +0100, Nicolas Saenz Julienne wrote:
> From: Jim Quinlan <james.quinlan@broadcom.com>
> 
> The DT bindings description of the brcmstb PCIe device is described.
> This node can only be used for now on the Raspberry Pi 4.
> 
> This was based on Jim's original submission[1], converted to yaml and
> adapted to the RPi4 case.
> 
> [1] https://patchwork.kernel.org/patch/10605937/
> 
> Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> ---
>  .../bindings/pci/brcm,stb-pcie.yaml           | 116 ++++++++++++++++++
>  1 file changed, 116 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml

I'm working on a common PCI host schema that should cut down some of the 
standard props.

> diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> new file mode 100644
> index 000000000000..0b81c26f8568
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> @@ -0,0 +1,116 @@
> +# SPDX-License-Identifier: GPL-2.0

Dual license new bindings please:

# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Brcmstb PCIe Host Controller Device Tree Bindings
> +
> +maintainers:
> +  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> +
> +properties:
> +  compatible:
> +    const: brcm,bcm2711-pcie # The Raspberry Pi 4
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - description: PCIe host controller
> +      - description: builtin MSI controller
> +
> +  interrupt-names:
> +    minItems: 1
> +    maxItems: 2
> +    items:
> +      - const: pcie
> +      - const: msi
> +
> +  "#address-cells":
> +    const: 3
> +
> +  "#size-cells":
> +    const: 2
> +
> +  "#interrupt-cells":
> +    const: 1
> +
> +  interrupt-map-mask: true
> +
> +  interrupt-map: true

4 entries?

You'll need to bracket <> each entry in the example and dts.

> +
> +  ranges: true

How many entries?

> +
> +  dma-ranges: true

How many entries?

> +
> +  clocks:
> +    maxItems: 1
> +
> +  clock-names:
> +    items:
> +      - const: sw_pcie
> +
> +  msi-controller:
> +    description: Identifies the node as an MSI controller.
> +    type: boolean
> +
> +  msi-parent:
> +    description: MSI controller the device is capable of using.
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +
> +  linux,pci-domain:
> +    description: PCI domain ID. Should be unique for each host controller.
> +    $ref: /schemas/types.yaml#/definitions/uint32
> +
> +  brcm,enable-ssc:
> +    description: Indicates usage of spread-spectrum clocking.
> +    type: boolean
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#address-cells"
> +  - "#size-cells"
> +  - "#interrupt-cells"
> +  - interrupt-map-mask
> +  - interrupt-map
> +  - ranges
> +  - dma-ranges
> +  - linux,pci-domain
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    scb {
> +            #address-cells = <2>;
> +            #size-cells = <1>;
> +            pcie0: pcie@7d500000 {
> +                    compatible = "brcm,bcm2711-pcie";
> +                    reg = <0x0 0x7d500000 0x9310>;
> +                    #address-cells = <3>;
> +                    #size-cells = <2>;
> +                    #interrupt-cells = <1>;
> +                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> +                                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> +                    interrupt-names = "pcie", "msi";
> +                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> +                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
> +                                     0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
> +                                     0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
> +                                     0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
> +                    msi-parent = <&pcie0>;
> +                    msi-controller;
> +                    ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
> +                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
> +                    linux,pci-domain = <0>;
> +                    brcm,enable-ssc;
> +            };
> +    };
> -- 
> 2.23.0
>
Nicolas Saenz Julienne Nov. 14, 2019, 1:15 p.m. UTC | #4
On Tue, 2019-11-12 at 22:15 -0600, Rob Herring wrote:
> On Wed, Nov 06, 2019 at 10:45:23PM +0100, Nicolas Saenz Julienne wrote:
> > From: Jim Quinlan <james.quinlan@broadcom.com>
> > 
> > The DT bindings description of the brcmstb PCIe device is described.
> > This node can only be used for now on the Raspberry Pi 4.
> > 
> > This was based on Jim's original submission[1], converted to yaml and
> > adapted to the RPi4 case.
> > 
> > [1] https://patchwork.kernel.org/patch/10605937/
> > 
> > Signed-off-by: Jim Quinlan <james.quinlan@broadcom.com>
> > Co-developed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > ---
> >  .../bindings/pci/brcm,stb-pcie.yaml           | 116 ++++++++++++++++++
> >  1 file changed, 116 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> 
> I'm working on a common PCI host schema that should cut down some of the 
> standard props.

Is there a way for me to have a look at it so I can rebase the binding on top
of it?

> > diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > new file mode 100644
> > index 000000000000..0b81c26f8568
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
> > @@ -0,0 +1,116 @@
> > +# SPDX-License-Identifier: GPL-2.0
> 
> Dual license new bindings please:
> 
> # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)

Noted

> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Brcmstb PCIe Host Controller Device Tree Bindings
> > +
> > +maintainers:
> > +  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
> > +
> > +properties:
> > +  compatible:
> > +    const: brcm,bcm2711-pcie # The Raspberry Pi 4
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    minItems: 1
> > +    maxItems: 2
> > +    items:
> > +      - description: PCIe host controller
> > +      - description: builtin MSI controller
> > +
> > +  interrupt-names:
> > +    minItems: 1
> > +    maxItems: 2
> > +    items:
> > +      - const: pcie
> > +      - const: msi
> > +
> > +  "#address-cells":
> > +    const: 3
> > +
> > +  "#size-cells":
> > +    const: 2
> > +
> > +  "#interrupt-cells":
> > +    const: 1
> > +
> > +  interrupt-map-mask: true
> > +
> > +  interrupt-map: true
> 
> 4 entries?

You're right, for this specific case, as XHCI is hardwired and only uses one
irq, we'd only need the first entry.  Although who knows, maybe they are wired
nonetheless. I guess it's safer to assume they aren't for now.

> You'll need to bracket <> each entry in the example and dts.

Ok

> > +
> > +  ranges: true
> 
> How many entries?

One, I'll update it.

> > +
> > +  dma-ranges: true
> 
> How many entries?

One, I'll update it.

> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  clock-names:
> > +    items:
> > +      - const: sw_pcie
> > +
> > +  msi-controller:
> > +    description: Identifies the node as an MSI controller.
> > +    type: boolean
> > +
> > +  msi-parent:
> > +    description: MSI controller the device is capable of using.
> > +    $ref: /schemas/types.yaml#/definitions/phandle
> > +
> > +  linux,pci-domain:
> > +    description: PCI domain ID. Should be unique for each host controller.
> > +    $ref: /schemas/types.yaml#/definitions/uint32
> > +
> > +  brcm,enable-ssc:
> > +    description: Indicates usage of spread-spectrum clocking.
> > +    type: boolean
> > +
> > +required:
> > +  - compatible
> > +  - reg
> > +  - "#address-cells"
> > +  - "#size-cells"
> > +  - "#interrupt-cells"
> > +  - interrupt-map-mask
> > +  - interrupt-map
> > +  - ranges
> > +  - dma-ranges
> > +  - linux,pci-domain
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/irq.h>
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    scb {
> > +            #address-cells = <2>;
> > +            #size-cells = <1>;
> > +            pcie0: pcie@7d500000 {
> > +                    compatible = "brcm,bcm2711-pcie";
> > +                    reg = <0x0 0x7d500000 0x9310>;
> > +                    #address-cells = <3>;
> > +                    #size-cells = <2>;
> > +                    #interrupt-cells = <1>;
> > +                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
> > +                                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
> > +                    interrupt-names = "pcie", "msi";
> > +                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
> > +                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143
> > IRQ_TYPE_LEVEL_HIGH
> > +                                     0 0 0 2 &gicv2 GIC_SPI 144
> > IRQ_TYPE_LEVEL_HIGH
> > +                                     0 0 0 3 &gicv2 GIC_SPI 145
> > IRQ_TYPE_LEVEL_HIGH
> > +                                     0 0 0 4 &gicv2 GIC_SPI 146
> > IRQ_TYPE_LEVEL_HIGH>;
> > +                    msi-parent = <&pcie0>;
> > +                    msi-controller;
> > +                    ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0
> > 0x04000000>;
> > +                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000
> > 0x0 0x80000000>;
> > +                    linux,pci-domain = <0>;
> > +                    brcm,enable-ssc;
> > +            };
> > +    };
> > -- 
> > 2.23.0
> > 
> 
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
new file mode 100644
index 000000000000..0b81c26f8568
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -0,0 +1,116 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/brcm,stb-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Brcmstb PCIe Host Controller Device Tree Bindings
+
+maintainers:
+  - Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
+
+properties:
+  compatible:
+    const: brcm,bcm2711-pcie # The Raspberry Pi 4
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description: PCIe host controller
+      - description: builtin MSI controller
+
+  interrupt-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: pcie
+      - const: msi
+
+  "#address-cells":
+    const: 3
+
+  "#size-cells":
+    const: 2
+
+  "#interrupt-cells":
+    const: 1
+
+  interrupt-map-mask: true
+
+  interrupt-map: true
+
+  ranges: true
+
+  dma-ranges: true
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: sw_pcie
+
+  msi-controller:
+    description: Identifies the node as an MSI controller.
+    type: boolean
+
+  msi-parent:
+    description: MSI controller the device is capable of using.
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  linux,pci-domain:
+    description: PCI domain ID. Should be unique for each host controller.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  brcm,enable-ssc:
+    description: Indicates usage of spread-spectrum clocking.
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - "#interrupt-cells"
+  - interrupt-map-mask
+  - interrupt-map
+  - ranges
+  - dma-ranges
+  - linux,pci-domain
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    scb {
+            #address-cells = <2>;
+            #size-cells = <1>;
+            pcie0: pcie@7d500000 {
+                    compatible = "brcm,bcm2711-pcie";
+                    reg = <0x0 0x7d500000 0x9310>;
+                    #address-cells = <3>;
+                    #size-cells = <2>;
+                    #interrupt-cells = <1>;
+                    interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "pcie", "msi";
+                    interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+                    interrupt-map = <0 0 0 1 &gicv2 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 2 &gicv2 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 3 &gicv2 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH
+                                     0 0 0 4 &gicv2 GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+                    msi-parent = <&pcie0>;
+                    msi-controller;
+                    ranges = <0x02000000 0x0 0xf8000000 0x6 0x00000000 0x0 0x04000000>;
+                    dma-ranges = <0x02000000 0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>;
+                    linux,pci-domain = <0>;
+                    brcm,enable-ssc;
+            };
+    };