diff mbox series

[1/2] DTS: bindings: wl1251: mark ti,power-gpio as optional

Message ID c95e814deed075352a05c392147e9458b0d1a447.1574591746.git.hns@goldelico.com (mailing list archive)
State Changes Requested
Delegated to: Kalle Valo
Headers show
Series net: wireless: ti: wl1251: sdio: remove ti,power-gpio | expand

Commit Message

H. Nikolaus Schaller Nov. 24, 2019, 10:35 a.m. UTC
It is now only useful for SPI interface.
Power control of SDIO mode is done through mmc core.

Suggested by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Rob Herring (Arm) Dec. 5, 2019, 4:51 p.m. UTC | #1
On Sun, 24 Nov 2019 11:35:45 +0100, "H. Nikolaus Schaller" wrote:
> It is now only useful for SPI interface.
> Power control of SDIO mode is done through mmc core.
> 
> Suggested by: Ulf Hansson <ulf.hansson@linaro.org>
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> ---
>  Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 

Acked-by: Rob Herring <robh@kernel.org>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
index f38950560982..88fd28d15eac 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
@@ -9,11 +9,12 @@  Required properties:
 - spi-max-frequency : Maximum SPI clocking speed of device in Hz
 - interrupts :        Should contain interrupt line
 - vio-supply :        phandle to regulator providing VIO
-- ti,power-gpio :     GPIO connected to chip's PMEN pin
 
 Optional properties:
 - ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which
                          provides configuration data (calibration, MAC, ...)
+- ti,power-gpio :	 GPIO connected to chip's PMEN pin if operated in
+			 SPI mode
 - Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
   for optional SPI connection related properties,