diff mbox series

[v3,1/2] DTS: bindings: wl1251: mark ti,power-gpio as optional

Message ID d34183026b1a46a082f73ab3d0888c92cf6286ec.1580068813.git.hns@goldelico.com (mailing list archive)
State Accepted
Commit 57f0a29c3e089b74a42ff62289a47512ab3f8eba
Delegated to: Kalle Valo
Headers show
Series wl1251: remove ti,power-gpio for sdio mode | expand

Commit Message

H. Nikolaus Schaller Jan. 26, 2020, 8 p.m. UTC
It is now only useful for SPI interface.
Power control of SDIO mode is done through mmc core.

Suggested by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
---
 Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

Comments

Rob Herring (Arm) Jan. 27, 2020, 3:36 p.m. UTC | #1
On Sun, 26 Jan 2020 21:00:13 +0100, "H. Nikolaus Schaller" wrote:
> It is now only useful for SPI interface.
> Power control of SDIO mode is done through mmc core.
> 
> Suggested by: Ulf Hansson <ulf.hansson@linaro.org>
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
> ---
>  Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 

Please add Acked-by/Reviewed-by tags when posting new versions. However,
there's no need to repost patches *only* to add the tags. The upstream
maintainer will do that for acks received on the version they apply.

If a tag was not added on purpose, please state why and what changed.
Kalle Valo Feb. 12, 2020, 4:16 p.m. UTC | #2
"H. Nikolaus Schaller" <hns@goldelico.com> wrote:

> It is now only useful for SPI interface.
> Power control of SDIO mode is done through mmc core.
> 
> Suggested by: Ulf Hansson <ulf.hansson@linaro.org>
> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>

2 patches applied to wireless-drivers-next.git, thanks.

57f0a29c3e08 DTS: bindings: wl1251: mark ti,power-gpio as optional
346bdd8e979d wl1251: remove ti,power-gpio for SDIO mode
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
index f38950560982..88fd28d15eac 100644
--- a/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
+++ b/Documentation/devicetree/bindings/net/wireless/ti,wl1251.txt
@@ -9,11 +9,12 @@  Required properties:
 - spi-max-frequency : Maximum SPI clocking speed of device in Hz
 - interrupts :        Should contain interrupt line
 - vio-supply :        phandle to regulator providing VIO
-- ti,power-gpio :     GPIO connected to chip's PMEN pin
 
 Optional properties:
 - ti,wl1251-has-eeprom : boolean, the wl1251 has an eeprom connected, which
                          provides configuration data (calibration, MAC, ...)
+- ti,power-gpio :	 GPIO connected to chip's PMEN pin if operated in
+			 SPI mode
 - Please consult Documentation/devicetree/bindings/spi/spi-bus.txt
   for optional SPI connection related properties,