diff mbox series

[v6,1/5] PCI: Don't disable decoding when mmio_always_on is set

Message ID 20200427060551.1372591-2-jiaxun.yang@flygoat.com (mailing list archive)
State Superseded, archived
Headers show
Series Loongson PCI Generic Driver | expand

Commit Message

Jiaxun Yang April 27, 2020, 6:05 a.m. UTC
Don't disable MEM/IO decoing when a device have both non_compliant_bars
and mmio_always_on.

That would allow us quirk devices with junk in BARs but can't disable
their decoding.

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
---
 drivers/pci/probe.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Philippe Mathieu-Daudé April 27, 2020, 7:42 a.m. UTC | #1
On Mon, Apr 27, 2020 at 8:08 AM Jiaxun Yang <jiaxun.yang@flygoat.com> wrote:
>
> Don't disable MEM/IO decoing when a device have both non_compliant_bars

Typo "decoing" -> "decoding"

> and mmio_always_on.
>
> That would allow us quirk devices with junk in BARs but can't disable
> their decoding.
>
> Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
> ---
>  drivers/pci/probe.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
> index 77b8a145c39b..d9c2c3301a8a 100644
> --- a/drivers/pci/probe.c
> +++ b/drivers/pci/probe.c
> @@ -1822,7 +1822,7 @@ int pci_setup_device(struct pci_dev *dev)
>         /* Device class may be changed after fixup */
>         class = dev->class >> 8;
>
> -       if (dev->non_compliant_bars) {
> +       if (dev->non_compliant_bars && !dev->mmio_always_on) {
>                 pci_read_config_word(dev, PCI_COMMAND, &cmd);
>                 if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
>                         pci_info(dev, "device has non-compliant BARs; disabling IO/MEM decoding\n");
> --
> 2.26.0.rc2
>
diff mbox series

Patch

diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 77b8a145c39b..d9c2c3301a8a 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -1822,7 +1822,7 @@  int pci_setup_device(struct pci_dev *dev)
 	/* Device class may be changed after fixup */
 	class = dev->class >> 8;
 
-	if (dev->non_compliant_bars) {
+	if (dev->non_compliant_bars && !dev->mmio_always_on) {
 		pci_read_config_word(dev, PCI_COMMAND, &cmd);
 		if (cmd & (PCI_COMMAND_IO | PCI_COMMAND_MEMORY)) {
 			pci_info(dev, "device has non-compliant BARs; disabling IO/MEM decoding\n");