Message ID | 20200501150833.5251-4-eajames@linux.ibm.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | occ: Add support for P10 | expand |
On Fri, May 01, 2020 at 10:08:33AM -0500, Eddie James wrote: > The latest version of the On-Chip Controller (OCC) has a different > format for the temperature sensor data. Add a new temperature sensor > version to handle this data. > > Signed-off-by: Eddie James <eajames@linux.ibm.com> For my reference: Acked-by: Guenter Roeck <linux@roeck-us.net> I assume this depends on at least patch 2 of the series, so we'll have to wait for that to be accepted. Guenter > --- > drivers/hwmon/occ/common.c | 75 ++++++++++++++++++++++++++++++++++++++ > 1 file changed, 75 insertions(+) > > diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c > index 30e18eb60da7..52af0e728232 100644 > --- a/drivers/hwmon/occ/common.c > +++ b/drivers/hwmon/occ/common.c > @@ -41,6 +41,14 @@ struct temp_sensor_2 { > u8 value; > } __packed; > > +struct temp_sensor_10 { > + u32 sensor_id; > + u8 fru_type; > + u8 value; > + u8 throttle; > + u8 reserved; > +} __packed; > + > struct freq_sensor_1 { > u16 sensor_id; > u16 value; > @@ -307,6 +315,60 @@ static ssize_t occ_show_temp_2(struct device *dev, > return snprintf(buf, PAGE_SIZE - 1, "%u\n", val); > } > > +static ssize_t occ_show_temp_10(struct device *dev, > + struct device_attribute *attr, char *buf) > +{ > + int rc; > + u32 val = 0; > + struct temp_sensor_10 *temp; > + struct occ *occ = dev_get_drvdata(dev); > + struct occ_sensors *sensors = &occ->sensors; > + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); > + > + rc = occ_update_response(occ); > + if (rc) > + return rc; > + > + temp = ((struct temp_sensor_10 *)sensors->temp.data) + sattr->index; > + > + switch (sattr->nr) { > + case 0: > + val = get_unaligned_be32(&temp->sensor_id); > + break; > + case 1: > + val = temp->value; > + if (val == OCC_TEMP_SENSOR_FAULT) > + return -EREMOTEIO; > + > + /* > + * VRM doesn't return temperature, only alarm bit. This > + * attribute maps to tempX_alarm instead of tempX_input for > + * VRM > + */ > + if (temp->fru_type != OCC_FRU_TYPE_VRM) { > + /* sensor not ready */ > + if (val == 0) > + return -EAGAIN; > + > + val *= 1000; > + } > + break; > + case 2: > + val = temp->fru_type; > + break; > + case 3: > + val = temp->value == OCC_TEMP_SENSOR_FAULT; > + break; > + case 4: > + val = temp->throttle * 1000; > + break; > + default: > + return -EINVAL; > + } > + > + return snprintf(buf, PAGE_SIZE - 1, "%u\n", val); > +} > + > static ssize_t occ_show_freq_1(struct device *dev, > struct device_attribute *attr, char *buf) > { > @@ -745,6 +807,10 @@ static int occ_setup_sensor_attrs(struct occ *occ) > num_attrs += (sensors->temp.num_sensors * 4); > show_temp = occ_show_temp_2; > break; > + case 0x10: > + num_attrs += (sensors->temp.num_sensors * 5); > + show_temp = occ_show_temp_10; > + break; > default: > sensors->temp.num_sensors = 0; > } > @@ -844,6 +910,15 @@ static int occ_setup_sensor_attrs(struct occ *occ) > attr->sensor = OCC_INIT_ATTR(attr->name, 0444, > show_temp, NULL, 3, i); > attr++; > + > + if (sensors->temp.version == 0x10) { > + snprintf(attr->name, sizeof(attr->name), > + "temp%d_max", s); > + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, > + show_temp, NULL, > + 4, i); > + attr++; > + } > } > } >
On 5/6/20 10:57 AM, Guenter Roeck wrote: > On Fri, May 01, 2020 at 10:08:33AM -0500, Eddie James wrote: >> The latest version of the On-Chip Controller (OCC) has a different >> format for the temperature sensor data. Add a new temperature sensor >> version to handle this data. >> >> Signed-off-by: Eddie James <eajames@linux.ibm.com> > For my reference: > > Acked-by: Guenter Roeck <linux@roeck-us.net> > > I assume this depends on at least patch 2 of the series, so we'll have > to wait for that to be accepted. Thanks Guenter. Yes that's correct. Eddie > > Guenter > >> --- >> drivers/hwmon/occ/common.c | 75 ++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 75 insertions(+) >> >> diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c >> index 30e18eb60da7..52af0e728232 100644 >> --- a/drivers/hwmon/occ/common.c >> +++ b/drivers/hwmon/occ/common.c >> @@ -41,6 +41,14 @@ struct temp_sensor_2 { >> u8 value; >> } __packed; >> >> +struct temp_sensor_10 { >> + u32 sensor_id; >> + u8 fru_type; >> + u8 value; >> + u8 throttle; >> + u8 reserved; >> +} __packed; >> + >> struct freq_sensor_1 { >> u16 sensor_id; >> u16 value; >> @@ -307,6 +315,60 @@ static ssize_t occ_show_temp_2(struct device *dev, >> return snprintf(buf, PAGE_SIZE - 1, "%u\n", val); >> } >> >> +static ssize_t occ_show_temp_10(struct device *dev, >> + struct device_attribute *attr, char *buf) >> +{ >> + int rc; >> + u32 val = 0; >> + struct temp_sensor_10 *temp; >> + struct occ *occ = dev_get_drvdata(dev); >> + struct occ_sensors *sensors = &occ->sensors; >> + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); >> + >> + rc = occ_update_response(occ); >> + if (rc) >> + return rc; >> + >> + temp = ((struct temp_sensor_10 *)sensors->temp.data) + sattr->index; >> + >> + switch (sattr->nr) { >> + case 0: >> + val = get_unaligned_be32(&temp->sensor_id); >> + break; >> + case 1: >> + val = temp->value; >> + if (val == OCC_TEMP_SENSOR_FAULT) >> + return -EREMOTEIO; >> + >> + /* >> + * VRM doesn't return temperature, only alarm bit. This >> + * attribute maps to tempX_alarm instead of tempX_input for >> + * VRM >> + */ >> + if (temp->fru_type != OCC_FRU_TYPE_VRM) { >> + /* sensor not ready */ >> + if (val == 0) >> + return -EAGAIN; >> + >> + val *= 1000; >> + } >> + break; >> + case 2: >> + val = temp->fru_type; >> + break; >> + case 3: >> + val = temp->value == OCC_TEMP_SENSOR_FAULT; >> + break; >> + case 4: >> + val = temp->throttle * 1000; >> + break; >> + default: >> + return -EINVAL; >> + } >> + >> + return snprintf(buf, PAGE_SIZE - 1, "%u\n", val); >> +} >> + >> static ssize_t occ_show_freq_1(struct device *dev, >> struct device_attribute *attr, char *buf) >> { >> @@ -745,6 +807,10 @@ static int occ_setup_sensor_attrs(struct occ *occ) >> num_attrs += (sensors->temp.num_sensors * 4); >> show_temp = occ_show_temp_2; >> break; >> + case 0x10: >> + num_attrs += (sensors->temp.num_sensors * 5); >> + show_temp = occ_show_temp_10; >> + break; >> default: >> sensors->temp.num_sensors = 0; >> } >> @@ -844,6 +910,15 @@ static int occ_setup_sensor_attrs(struct occ *occ) >> attr->sensor = OCC_INIT_ATTR(attr->name, 0444, >> show_temp, NULL, 3, i); >> attr++; >> + >> + if (sensors->temp.version == 0x10) { >> + snprintf(attr->name, sizeof(attr->name), >> + "temp%d_max", s); >> + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, >> + show_temp, NULL, >> + 4, i); >> + attr++; >> + } >> } >> } >>
diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c index 30e18eb60da7..52af0e728232 100644 --- a/drivers/hwmon/occ/common.c +++ b/drivers/hwmon/occ/common.c @@ -41,6 +41,14 @@ struct temp_sensor_2 { u8 value; } __packed; +struct temp_sensor_10 { + u32 sensor_id; + u8 fru_type; + u8 value; + u8 throttle; + u8 reserved; +} __packed; + struct freq_sensor_1 { u16 sensor_id; u16 value; @@ -307,6 +315,60 @@ static ssize_t occ_show_temp_2(struct device *dev, return snprintf(buf, PAGE_SIZE - 1, "%u\n", val); } +static ssize_t occ_show_temp_10(struct device *dev, + struct device_attribute *attr, char *buf) +{ + int rc; + u32 val = 0; + struct temp_sensor_10 *temp; + struct occ *occ = dev_get_drvdata(dev); + struct occ_sensors *sensors = &occ->sensors; + struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr); + + rc = occ_update_response(occ); + if (rc) + return rc; + + temp = ((struct temp_sensor_10 *)sensors->temp.data) + sattr->index; + + switch (sattr->nr) { + case 0: + val = get_unaligned_be32(&temp->sensor_id); + break; + case 1: + val = temp->value; + if (val == OCC_TEMP_SENSOR_FAULT) + return -EREMOTEIO; + + /* + * VRM doesn't return temperature, only alarm bit. This + * attribute maps to tempX_alarm instead of tempX_input for + * VRM + */ + if (temp->fru_type != OCC_FRU_TYPE_VRM) { + /* sensor not ready */ + if (val == 0) + return -EAGAIN; + + val *= 1000; + } + break; + case 2: + val = temp->fru_type; + break; + case 3: + val = temp->value == OCC_TEMP_SENSOR_FAULT; + break; + case 4: + val = temp->throttle * 1000; + break; + default: + return -EINVAL; + } + + return snprintf(buf, PAGE_SIZE - 1, "%u\n", val); +} + static ssize_t occ_show_freq_1(struct device *dev, struct device_attribute *attr, char *buf) { @@ -745,6 +807,10 @@ static int occ_setup_sensor_attrs(struct occ *occ) num_attrs += (sensors->temp.num_sensors * 4); show_temp = occ_show_temp_2; break; + case 0x10: + num_attrs += (sensors->temp.num_sensors * 5); + show_temp = occ_show_temp_10; + break; default: sensors->temp.num_sensors = 0; } @@ -844,6 +910,15 @@ static int occ_setup_sensor_attrs(struct occ *occ) attr->sensor = OCC_INIT_ATTR(attr->name, 0444, show_temp, NULL, 3, i); attr++; + + if (sensors->temp.version == 0x10) { + snprintf(attr->name, sizeof(attr->name), + "temp%d_max", s); + attr->sensor = OCC_INIT_ATTR(attr->name, 0444, + show_temp, NULL, + 4, i); + attr++; + } } }
The latest version of the On-Chip Controller (OCC) has a different format for the temperature sensor data. Add a new temperature sensor version to handle this data. Signed-off-by: Eddie James <eajames@linux.ibm.com> --- drivers/hwmon/occ/common.c | 75 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+)