diff mbox series

[RFC,16/35] hwmon: (sis5595) Change PCIBIOS_SUCCESSFUL to 0

Message ID 20200713122247.10985-17-refactormyself@gmail.com (mailing list archive)
State Changes Requested, archived
Headers show
Series [RFC,01/35] xen-pciback: Change PCIBIOS_SUCCESSFUL to 0 | expand

Commit Message

Saheed O. Bolarinwa July 13, 2020, 12:22 p.m. UTC 
In reference to the PCI spec (Chapter 2), PCIBIOS* is an x86 concept.
Their scope should be limited within arch/x86.

Change all PCIBIOS_SUCCESSFUL to 0

Signed-off-by: "Saheed O. Bolarinwa" <refactormyself@gmail.com>
---
 drivers/hwmon/sis5595.c | 8 ++++----
 drivers/hwmon/via686a.c | 8 ++++----
 drivers/hwmon/vt8231.c  | 8 ++++----
 3 files changed, 12 insertions(+), 12 deletions(-)

Comments

Guenter Roeck July 14, 2020, 5:02 a.m. UTC | #1 
On 7/13/20 5:22 AM, Saheed O. Bolarinwa wrote:
> In reference to the PCI spec (Chapter 2), PCIBIOS* is an x86 concept.
> Their scope should be limited within arch/x86.
> 
> Change all PCIBIOS_SUCCESSFUL to 0
> 
> Signed-off-by: "Saheed O. Bolarinwa" <refactormyself@gmail.com>
> ---
>  drivers/hwmon/sis5595.c | 8 ++++----
>  drivers/hwmon/via686a.c | 8 ++++----
>  drivers/hwmon/vt8231.c  | 8 ++++----
>  3 files changed, 12 insertions(+), 12 deletions(-)
> 
> diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
> index 0c6741f949f5..0ea174fb3048 100644
> --- a/drivers/hwmon/sis5595.c
> +++ b/drivers/hwmon/sis5595.c
> @@ -825,7 +825,7 @@ static int sis5595_pci_probe(struct pci_dev *dev,
>  		pci_write_config_word(dev, SIS5595_BASE_REG, force_addr);
>  	}
>  
> -	if (PCIBIOS_SUCCESSFUL !=
> +	if (0 !=
>  	    pci_read_config_word(dev, SIS5595_BASE_REG, &address)) {

Yoda programming already terrible is, but "0 !=" is even worse than that
(and completely unnecessary). If you want to clean this up, do it right
and drop those unnecessary comparisons.

Guenter
diff mbox series

Patch

diff --git a/drivers/hwmon/sis5595.c b/drivers/hwmon/sis5595.c
index 0c6741f949f5..0ea174fb3048 100644
--- a/drivers/hwmon/sis5595.c
+++ b/drivers/hwmon/sis5595.c
@@ -825,7 +825,7 @@  static int sis5595_pci_probe(struct pci_dev *dev,
 		pci_write_config_word(dev, SIS5595_BASE_REG, force_addr);
 	}
 
-	if (PCIBIOS_SUCCESSFUL !=
+	if (0 !=
 	    pci_read_config_word(dev, SIS5595_BASE_REG, &address)) {
 		dev_err(&dev->dev, "Failed to read ISA address\n");
 		return -ENODEV;
@@ -843,16 +843,16 @@  static int sis5595_pci_probe(struct pci_dev *dev,
 		return -ENODEV;
 	}
 
-	if (PCIBIOS_SUCCESSFUL !=
+	if (0 !=
 	    pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable)) {
 		dev_err(&dev->dev, "Failed to read enable register\n");
 		return -ENODEV;
 	}
 	if (!(enable & 0x80)) {
-		if ((PCIBIOS_SUCCESSFUL !=
+		if ((0 !=
 		     pci_write_config_byte(dev, SIS5595_ENABLE_REG,
 					   enable | 0x80))
-		 || (PCIBIOS_SUCCESSFUL !=
+		 || (0 !=
 		     pci_read_config_byte(dev, SIS5595_ENABLE_REG, &enable))
 		 || (!(enable & 0x80))) {
 			/* doesn't work for some chips! */
diff --git a/drivers/hwmon/via686a.c b/drivers/hwmon/via686a.c
index a2eddd2c2538..cffea688878f 100644
--- a/drivers/hwmon/via686a.c
+++ b/drivers/hwmon/via686a.c
@@ -863,11 +863,11 @@  static int via686a_pci_probe(struct pci_dev *dev,
 	if (force_addr) {
 		address = force_addr & ~(VIA686A_EXTENT - 1);
 		dev_warn(&dev->dev, "Forcing ISA address 0x%x\n", address);
-		if (PCIBIOS_SUCCESSFUL !=
+		if (0 !=
 		    pci_write_config_word(dev, VIA686A_BASE_REG, address | 1))
 			return -ENODEV;
 	}
-	if (PCIBIOS_SUCCESSFUL !=
+	if (0 !=
 	    pci_read_config_word(dev, VIA686A_BASE_REG, &val))
 		return -ENODEV;
 
@@ -878,7 +878,7 @@  static int via686a_pci_probe(struct pci_dev *dev,
 		return -ENODEV;
 	}
 
-	if (PCIBIOS_SUCCESSFUL !=
+	if (0 !=
 	    pci_read_config_word(dev, VIA686A_ENABLE_REG, &val))
 		return -ENODEV;
 	if (!(val & 0x0001)) {
@@ -890,7 +890,7 @@  static int via686a_pci_probe(struct pci_dev *dev,
 		}
 
 		dev_warn(&dev->dev, "Enabling sensors\n");
-		if (PCIBIOS_SUCCESSFUL !=
+		if (0 !=
 		    pci_write_config_word(dev, VIA686A_ENABLE_REG,
 					  val | 0x0001))
 			return -ENODEV;
diff --git a/drivers/hwmon/vt8231.c b/drivers/hwmon/vt8231.c
index 2335d440f72d..cc1d24c2a2c8 100644
--- a/drivers/hwmon/vt8231.c
+++ b/drivers/hwmon/vt8231.c
@@ -987,12 +987,12 @@  static int vt8231_pci_probe(struct pci_dev *dev,
 		dev_warn(&dev->dev, "Forcing ISA address 0x%x\n",
 			 address);
 
-		if (PCIBIOS_SUCCESSFUL !=
+		if (0 !=
 		    pci_write_config_word(dev, VT8231_BASE_REG, address | 1))
 			return -ENODEV;
 	}
 
-	if (PCIBIOS_SUCCESSFUL != pci_read_config_word(dev, VT8231_BASE_REG,
+	if (0 != pci_read_config_word(dev, VT8231_BASE_REG,
 							&val))
 		return -ENODEV;
 
@@ -1002,13 +1002,13 @@  static int vt8231_pci_probe(struct pci_dev *dev,
 		return -ENODEV;
 	}
 
-	if (PCIBIOS_SUCCESSFUL != pci_read_config_word(dev, VT8231_ENABLE_REG,
+	if (0 != pci_read_config_word(dev, VT8231_ENABLE_REG,
 							&val))
 		return -ENODEV;
 
 	if (!(val & 0x0001)) {
 		dev_warn(&dev->dev, "enabling sensors\n");
-		if (PCIBIOS_SUCCESSFUL !=
+		if (0 !=
 			pci_write_config_word(dev, VT8231_ENABLE_REG,
 							val | 0x0001))
 			return -ENODEV;