Message ID | 20200501150833.5251-3-eajames@linux.ibm.com (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
Series | occ: Add support for P10 | expand |
On Fri, May 01, 2020 at 10:08:32AM -0500, Eddie James wrote: > The P10 OCC has a different SRAM address for the command and response > buffers. In addition, the SBE commands to access the SRAM have changed > format. Add versioning to the driver to handle these differences. > > Signed-off-by: Eddie James <eajames@linux.ibm.com> I don't recall seeing a maintainer Ack for this patch, nor any response at all. I'd be happy to apply the patch through hwmon, but I would need an Ack from a maintainer. Thanks, Guenter > --- > drivers/fsi/fsi-occ.c | 126 ++++++++++++++++++++++++++++++------------ > 1 file changed, 92 insertions(+), 34 deletions(-) > > diff --git a/drivers/fsi/fsi-occ.c b/drivers/fsi/fsi-occ.c > index 7da9c81759ac..942eff4032b0 100644 > --- a/drivers/fsi/fsi-occ.c > +++ b/drivers/fsi/fsi-occ.c > @@ -14,6 +14,7 @@ > #include <linux/mutex.h> > #include <linux/fsi-occ.h> > #include <linux/of.h> > +#include <linux/of_device.h> > #include <linux/platform_device.h> > #include <linux/sched.h> > #include <linux/slab.h> > @@ -24,8 +25,13 @@ > #define OCC_CMD_DATA_BYTES 4090 > #define OCC_RESP_DATA_BYTES 4089 > > -#define OCC_SRAM_CMD_ADDR 0xFFFBE000 > -#define OCC_SRAM_RSP_ADDR 0xFFFBF000 > +#define OCC_P9_SRAM_CMD_ADDR 0xFFFBE000 > +#define OCC_P9_SRAM_RSP_ADDR 0xFFFBF000 > + > +#define OCC_P10_SRAM_CMD_ADDR 0xFFFFD000 > +#define OCC_P10_SRAM_RSP_ADDR 0xFFFFE000 > + > +#define OCC_P10_SRAM_MODE 0x58 /* Normal mode, OCB channel 2 */ > > /* > * Assume we don't have much FFDC, if we do we'll overflow and > @@ -37,11 +43,14 @@ > #define OCC_TIMEOUT_MS 1000 > #define OCC_CMD_IN_PRG_WAIT_MS 50 > > +enum versions { occ_p9, occ_p10 }; > + > struct occ { > struct device *dev; > struct device *sbefifo; > char name[32]; > int idx; > + enum versions version; > struct miscdevice mdev; > struct mutex occ_lock; > }; > @@ -235,29 +244,43 @@ static int occ_verify_checksum(struct occ_response *resp, u16 data_length) > return 0; > } > > -static int occ_getsram(struct occ *occ, u32 address, void *data, ssize_t len) > +static int occ_getsram(struct occ *occ, u32 offset, void *data, ssize_t len) > { > u32 data_len = ((len + 7) / 8) * 8; /* must be multiples of 8 B */ > - size_t resp_len, resp_data_len; > - __be32 *resp, cmd[5]; > - int rc; > + size_t cmd_len, resp_len, resp_data_len; > + __be32 *resp, cmd[6]; > + int idx = 0, rc; > > /* > * Magic sequence to do SBE getsram command. SBE will fetch data from > * specified SRAM address. > */ > - cmd[0] = cpu_to_be32(0x5); > + switch (occ->version) { > + default: > + case occ_p9: > + cmd_len = 5; > + cmd[2] = cpu_to_be32(1); /* Normal mode */ > + cmd[3] = cpu_to_be32(OCC_P9_SRAM_RSP_ADDR + offset); > + break; > + case occ_p10: > + idx = 1; > + cmd_len = 6; > + cmd[2] = cpu_to_be32(OCC_P10_SRAM_MODE); > + cmd[3] = 0; > + cmd[4] = cpu_to_be32(OCC_P10_SRAM_RSP_ADDR + offset); > + break; > + } > + > + cmd[0] = cpu_to_be32(cmd_len); > cmd[1] = cpu_to_be32(SBEFIFO_CMD_GET_OCC_SRAM); > - cmd[2] = cpu_to_be32(1); > - cmd[3] = cpu_to_be32(address); > - cmd[4] = cpu_to_be32(data_len); > + cmd[4 + idx] = cpu_to_be32(data_len); > > resp_len = (data_len >> 2) + OCC_SBE_STATUS_WORDS; > resp = kzalloc(resp_len << 2, GFP_KERNEL); > if (!resp) > return -ENOMEM; > > - rc = sbefifo_submit(occ->sbefifo, cmd, 5, resp, &resp_len); > + rc = sbefifo_submit(occ->sbefifo, cmd, cmd_len, resp, &resp_len); > if (rc) > goto free; > > @@ -287,20 +310,21 @@ static int occ_getsram(struct occ *occ, u32 address, void *data, ssize_t len) > return rc; > } > > -static int occ_putsram(struct occ *occ, u32 address, const void *data, > - ssize_t len) > +static int occ_putsram(struct occ *occ, const void *data, ssize_t len) > { > size_t cmd_len, buf_len, resp_len, resp_data_len; > u32 data_len = ((len + 7) / 8) * 8; /* must be multiples of 8 B */ > __be32 *buf; > - int rc; > + int idx = 0, rc; > + > + cmd_len = (occ->version == occ_p10) ? 6 : 5; > > /* > * We use the same buffer for command and response, make > * sure it's big enough > */ > resp_len = OCC_SBE_STATUS_WORDS; > - cmd_len = (data_len >> 2) + 5; > + cmd_len += data_len >> 2; > buf_len = max(cmd_len, resp_len); > buf = kzalloc(buf_len << 2, GFP_KERNEL); > if (!buf) > @@ -312,11 +336,23 @@ static int occ_putsram(struct occ *occ, u32 address, const void *data, > */ > buf[0] = cpu_to_be32(cmd_len); > buf[1] = cpu_to_be32(SBEFIFO_CMD_PUT_OCC_SRAM); > - buf[2] = cpu_to_be32(1); > - buf[3] = cpu_to_be32(address); > - buf[4] = cpu_to_be32(data_len); > > - memcpy(&buf[5], data, len); > + switch (occ->version) { > + default: > + case occ_p9: > + buf[2] = cpu_to_be32(1); /* Normal mode */ > + buf[3] = cpu_to_be32(OCC_P9_SRAM_CMD_ADDR); > + break; > + case occ_p10: > + idx = 1; > + buf[2] = cpu_to_be32(OCC_P10_SRAM_MODE); > + buf[3] = 0; > + buf[4] = cpu_to_be32(OCC_P10_SRAM_CMD_ADDR); > + break; > + } > + > + buf[4 + idx] = cpu_to_be32(data_len); > + memcpy(&buf[5 + idx], data, len); > > rc = sbefifo_submit(occ->sbefifo, buf, cmd_len, buf, &resp_len); > if (rc) > @@ -356,21 +392,35 @@ static int occ_putsram(struct occ *occ, u32 address, const void *data, > static int occ_trigger_attn(struct occ *occ) > { > __be32 buf[OCC_SBE_STATUS_WORDS]; > - size_t resp_len, resp_data_len; > - int rc; > + size_t cmd_len, resp_len, resp_data_len; > + int idx = 0, rc; > > - BUILD_BUG_ON(OCC_SBE_STATUS_WORDS < 7); > + BUILD_BUG_ON(OCC_SBE_STATUS_WORDS < 8); > resp_len = OCC_SBE_STATUS_WORDS; > > - buf[0] = cpu_to_be32(0x5 + 0x2); /* Chip-op length in words */ > + switch (occ->version) { > + default: > + case occ_p9: > + cmd_len = 7; > + buf[2] = cpu_to_be32(3); /* Circular mode */ > + buf[3] = 0; > + break; > + case occ_p10: > + idx = 1; > + cmd_len = 8; > + buf[2] = cpu_to_be32(0xd0); /* Circular mode, OCB Channel 1 */ > + buf[3] = 0; > + buf[4] = 0; > + break; > + } > + > + buf[0] = cpu_to_be32(cmd_len); /* Chip-op length in words */ > buf[1] = cpu_to_be32(SBEFIFO_CMD_PUT_OCC_SRAM); > - buf[2] = cpu_to_be32(0x3); /* Mode: Circular */ > - buf[3] = cpu_to_be32(0x0); /* Address: ignore in mode 3 */ > - buf[4] = cpu_to_be32(0x8); /* Data length in bytes */ > - buf[5] = cpu_to_be32(0x20010000); /* Trigger OCC attention */ > - buf[6] = 0; > + buf[4 + idx] = cpu_to_be32(8); /* Data length in bytes */ > + buf[5 + idx] = cpu_to_be32(0x20010000); /* Trigger OCC attention */ > + buf[6 + idx] = 0; > > - rc = sbefifo_submit(occ->sbefifo, buf, 7, buf, &resp_len); > + rc = sbefifo_submit(occ->sbefifo, buf, cmd_len, buf, &resp_len); > if (rc) > goto error; > > @@ -429,7 +479,7 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len, > > /* Extract the seq_no from the command (first byte) */ > seq_no = *(const u8 *)request; > - rc = occ_putsram(occ, OCC_SRAM_CMD_ADDR, request, req_len); > + rc = occ_putsram(occ, request, req_len); > if (rc) > goto done; > > @@ -440,7 +490,7 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len, > /* Read occ response header */ > start = jiffies; > do { > - rc = occ_getsram(occ, OCC_SRAM_RSP_ADDR, resp, 8); > + rc = occ_getsram(occ, 0, resp, 8); > if (rc) > goto done; > > @@ -476,8 +526,7 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len, > /* Grab the rest */ > if (resp_data_length > 1) { > /* already got 3 bytes resp, also need 2 bytes checksum */ > - rc = occ_getsram(occ, OCC_SRAM_RSP_ADDR + 8, > - &resp->data[3], resp_data_length - 1); > + rc = occ_getsram(occ, 8, &resp->data[3], resp_data_length - 1); > if (rc) > goto done; > } > @@ -508,6 +557,7 @@ static int occ_probe(struct platform_device *pdev) > struct occ *occ; > struct platform_device *hwmon_dev; > struct device *dev = &pdev->dev; > + const void *md = of_device_get_match_data(dev); > struct platform_device_info hwmon_dev_info = { > .parent = dev, > .name = "occ-hwmon", > @@ -517,6 +567,7 @@ static int occ_probe(struct platform_device *pdev) > if (!occ) > return -ENOMEM; > > + occ->version = (enum versions)md; > occ->dev = dev; > occ->sbefifo = dev->parent; > mutex_init(&occ->occ_lock); > @@ -575,7 +626,14 @@ static int occ_remove(struct platform_device *pdev) > } > > static const struct of_device_id occ_match[] = { > - { .compatible = "ibm,p9-occ" }, > + { > + .compatible = "ibm,p9-occ", > + .data = (void *)occ_p9 > + }, > + { > + .compatible = "ibm,p10-occ", > + .data = (void *)occ_p10 > + }, > { }, > }; >
On Sun, 19 Jul 2020 at 22:13, Guenter Roeck <linux@roeck-us.net> wrote: > > On Fri, May 01, 2020 at 10:08:32AM -0500, Eddie James wrote: > > The P10 OCC has a different SRAM address for the command and response > > buffers. In addition, the SBE commands to access the SRAM have changed > > format. Add versioning to the driver to handle these differences. > > > > Signed-off-by: Eddie James <eajames@linux.ibm.com> > > I don't recall seeing a maintainer Ack for this patch, nor any response > at all. I'd be happy to apply the patch through hwmon, but I would need > an Ack from a maintainer. That would be great. I had one question before it goes in, but once Eddie has sorted that out it can go through your tree. > > Thanks, > Guenter > > > --- > > drivers/fsi/fsi-occ.c | 126 ++++++++++++++++++++++++++++++------------ > > 1 file changed, 92 insertions(+), 34 deletions(-) > > @@ -508,6 +557,7 @@ static int occ_probe(struct platform_device *pdev) > > struct occ *occ; > > struct platform_device *hwmon_dev; > > struct device *dev = &pdev->dev; > > + const void *md = of_device_get_match_data(dev); > > struct platform_device_info hwmon_dev_info = { > > .parent = dev, > > .name = "occ-hwmon", > > @@ -517,6 +567,7 @@ static int occ_probe(struct platform_device *pdev) > > if (!occ) > > return -ENOMEM; > > > > + occ->version = (enum versions)md; The 0day bot warns about this when bulding for 64 bit architectures. How about you drop the match data and instead match on the compatible string to know which version to expect? > > occ->dev = dev; > > occ->sbefifo = dev->parent; > > mutex_init(&occ->occ_lock); > > @@ -575,7 +626,14 @@ static int occ_remove(struct platform_device *pdev) > > } > > > > static const struct of_device_id occ_match[] = { > > - { .compatible = "ibm,p9-occ" }, > > + { > > + .compatible = "ibm,p9-occ", > > + .data = (void *)occ_p9 > > + }, > > + { > > + .compatible = "ibm,p10-occ", > > + .data = (void *)occ_p10 > > + }, > > { }, > > }; > >
On 7/19/20 9:47 PM, Joel Stanley wrote: > On Sun, 19 Jul 2020 at 22:13, Guenter Roeck <linux@roeck-us.net> wrote: >> >> On Fri, May 01, 2020 at 10:08:32AM -0500, Eddie James wrote: >>> The P10 OCC has a different SRAM address for the command and response >>> buffers. In addition, the SBE commands to access the SRAM have changed >>> format. Add versioning to the driver to handle these differences. >>> >>> Signed-off-by: Eddie James <eajames@linux.ibm.com> >> >> I don't recall seeing a maintainer Ack for this patch, nor any response >> at all. I'd be happy to apply the patch through hwmon, but I would need >> an Ack from a maintainer. > > That would be great. I had one question before it goes in, but once > Eddie has sorted that out it can go through your tree. > >> >> Thanks, >> Guenter >> >>> --- >>> drivers/fsi/fsi-occ.c | 126 ++++++++++++++++++++++++++++++------------ >>> 1 file changed, 92 insertions(+), 34 deletions(-) > >>> @@ -508,6 +557,7 @@ static int occ_probe(struct platform_device *pdev) >>> struct occ *occ; >>> struct platform_device *hwmon_dev; >>> struct device *dev = &pdev->dev; >>> + const void *md = of_device_get_match_data(dev); >>> struct platform_device_info hwmon_dev_info = { >>> .parent = dev, >>> .name = "occ-hwmon", >>> @@ -517,6 +567,7 @@ static int occ_probe(struct platform_device *pdev) >>> if (!occ) >>> return -ENOMEM; >>> >>> + occ->version = (enum versions)md; > > The 0day bot warns about this when bulding for 64 bit architectures. > > How about you drop the match data and instead match on the compatible > string to know which version to expect? > That seems to be less desirable and defeat the purpose of of_device_get_match_data(). I have seen better solutions. Some options: version = (uintptr_t)of_device_get_match_data(dev); version = (unsigned long)of_device_get_match_data(dev); version = (enum versions)(uintptr_t)of_device_get_match_data(dev); You don't otherwise use the "md" variable, so you might as well drop it. Guenter >>> occ->dev = dev; >>> occ->sbefifo = dev->parent; >>> mutex_init(&occ->occ_lock); >>> @@ -575,7 +626,14 @@ static int occ_remove(struct platform_device *pdev) >>> } >>> >>> static const struct of_device_id occ_match[] = { >>> - { .compatible = "ibm,p9-occ" }, >>> + { >>> + .compatible = "ibm,p9-occ", >>> + .data = (void *)occ_p9 >>> + }, >>> + { >>> + .compatible = "ibm,p10-occ", >>> + .data = (void *)occ_p10 >>> + }, >>> { }, >>> }; >>>
diff --git a/drivers/fsi/fsi-occ.c b/drivers/fsi/fsi-occ.c index 7da9c81759ac..942eff4032b0 100644 --- a/drivers/fsi/fsi-occ.c +++ b/drivers/fsi/fsi-occ.c @@ -14,6 +14,7 @@ #include <linux/mutex.h> #include <linux/fsi-occ.h> #include <linux/of.h> +#include <linux/of_device.h> #include <linux/platform_device.h> #include <linux/sched.h> #include <linux/slab.h> @@ -24,8 +25,13 @@ #define OCC_CMD_DATA_BYTES 4090 #define OCC_RESP_DATA_BYTES 4089 -#define OCC_SRAM_CMD_ADDR 0xFFFBE000 -#define OCC_SRAM_RSP_ADDR 0xFFFBF000 +#define OCC_P9_SRAM_CMD_ADDR 0xFFFBE000 +#define OCC_P9_SRAM_RSP_ADDR 0xFFFBF000 + +#define OCC_P10_SRAM_CMD_ADDR 0xFFFFD000 +#define OCC_P10_SRAM_RSP_ADDR 0xFFFFE000 + +#define OCC_P10_SRAM_MODE 0x58 /* Normal mode, OCB channel 2 */ /* * Assume we don't have much FFDC, if we do we'll overflow and @@ -37,11 +43,14 @@ #define OCC_TIMEOUT_MS 1000 #define OCC_CMD_IN_PRG_WAIT_MS 50 +enum versions { occ_p9, occ_p10 }; + struct occ { struct device *dev; struct device *sbefifo; char name[32]; int idx; + enum versions version; struct miscdevice mdev; struct mutex occ_lock; }; @@ -235,29 +244,43 @@ static int occ_verify_checksum(struct occ_response *resp, u16 data_length) return 0; } -static int occ_getsram(struct occ *occ, u32 address, void *data, ssize_t len) +static int occ_getsram(struct occ *occ, u32 offset, void *data, ssize_t len) { u32 data_len = ((len + 7) / 8) * 8; /* must be multiples of 8 B */ - size_t resp_len, resp_data_len; - __be32 *resp, cmd[5]; - int rc; + size_t cmd_len, resp_len, resp_data_len; + __be32 *resp, cmd[6]; + int idx = 0, rc; /* * Magic sequence to do SBE getsram command. SBE will fetch data from * specified SRAM address. */ - cmd[0] = cpu_to_be32(0x5); + switch (occ->version) { + default: + case occ_p9: + cmd_len = 5; + cmd[2] = cpu_to_be32(1); /* Normal mode */ + cmd[3] = cpu_to_be32(OCC_P9_SRAM_RSP_ADDR + offset); + break; + case occ_p10: + idx = 1; + cmd_len = 6; + cmd[2] = cpu_to_be32(OCC_P10_SRAM_MODE); + cmd[3] = 0; + cmd[4] = cpu_to_be32(OCC_P10_SRAM_RSP_ADDR + offset); + break; + } + + cmd[0] = cpu_to_be32(cmd_len); cmd[1] = cpu_to_be32(SBEFIFO_CMD_GET_OCC_SRAM); - cmd[2] = cpu_to_be32(1); - cmd[3] = cpu_to_be32(address); - cmd[4] = cpu_to_be32(data_len); + cmd[4 + idx] = cpu_to_be32(data_len); resp_len = (data_len >> 2) + OCC_SBE_STATUS_WORDS; resp = kzalloc(resp_len << 2, GFP_KERNEL); if (!resp) return -ENOMEM; - rc = sbefifo_submit(occ->sbefifo, cmd, 5, resp, &resp_len); + rc = sbefifo_submit(occ->sbefifo, cmd, cmd_len, resp, &resp_len); if (rc) goto free; @@ -287,20 +310,21 @@ static int occ_getsram(struct occ *occ, u32 address, void *data, ssize_t len) return rc; } -static int occ_putsram(struct occ *occ, u32 address, const void *data, - ssize_t len) +static int occ_putsram(struct occ *occ, const void *data, ssize_t len) { size_t cmd_len, buf_len, resp_len, resp_data_len; u32 data_len = ((len + 7) / 8) * 8; /* must be multiples of 8 B */ __be32 *buf; - int rc; + int idx = 0, rc; + + cmd_len = (occ->version == occ_p10) ? 6 : 5; /* * We use the same buffer for command and response, make * sure it's big enough */ resp_len = OCC_SBE_STATUS_WORDS; - cmd_len = (data_len >> 2) + 5; + cmd_len += data_len >> 2; buf_len = max(cmd_len, resp_len); buf = kzalloc(buf_len << 2, GFP_KERNEL); if (!buf) @@ -312,11 +336,23 @@ static int occ_putsram(struct occ *occ, u32 address, const void *data, */ buf[0] = cpu_to_be32(cmd_len); buf[1] = cpu_to_be32(SBEFIFO_CMD_PUT_OCC_SRAM); - buf[2] = cpu_to_be32(1); - buf[3] = cpu_to_be32(address); - buf[4] = cpu_to_be32(data_len); - memcpy(&buf[5], data, len); + switch (occ->version) { + default: + case occ_p9: + buf[2] = cpu_to_be32(1); /* Normal mode */ + buf[3] = cpu_to_be32(OCC_P9_SRAM_CMD_ADDR); + break; + case occ_p10: + idx = 1; + buf[2] = cpu_to_be32(OCC_P10_SRAM_MODE); + buf[3] = 0; + buf[4] = cpu_to_be32(OCC_P10_SRAM_CMD_ADDR); + break; + } + + buf[4 + idx] = cpu_to_be32(data_len); + memcpy(&buf[5 + idx], data, len); rc = sbefifo_submit(occ->sbefifo, buf, cmd_len, buf, &resp_len); if (rc) @@ -356,21 +392,35 @@ static int occ_putsram(struct occ *occ, u32 address, const void *data, static int occ_trigger_attn(struct occ *occ) { __be32 buf[OCC_SBE_STATUS_WORDS]; - size_t resp_len, resp_data_len; - int rc; + size_t cmd_len, resp_len, resp_data_len; + int idx = 0, rc; - BUILD_BUG_ON(OCC_SBE_STATUS_WORDS < 7); + BUILD_BUG_ON(OCC_SBE_STATUS_WORDS < 8); resp_len = OCC_SBE_STATUS_WORDS; - buf[0] = cpu_to_be32(0x5 + 0x2); /* Chip-op length in words */ + switch (occ->version) { + default: + case occ_p9: + cmd_len = 7; + buf[2] = cpu_to_be32(3); /* Circular mode */ + buf[3] = 0; + break; + case occ_p10: + idx = 1; + cmd_len = 8; + buf[2] = cpu_to_be32(0xd0); /* Circular mode, OCB Channel 1 */ + buf[3] = 0; + buf[4] = 0; + break; + } + + buf[0] = cpu_to_be32(cmd_len); /* Chip-op length in words */ buf[1] = cpu_to_be32(SBEFIFO_CMD_PUT_OCC_SRAM); - buf[2] = cpu_to_be32(0x3); /* Mode: Circular */ - buf[3] = cpu_to_be32(0x0); /* Address: ignore in mode 3 */ - buf[4] = cpu_to_be32(0x8); /* Data length in bytes */ - buf[5] = cpu_to_be32(0x20010000); /* Trigger OCC attention */ - buf[6] = 0; + buf[4 + idx] = cpu_to_be32(8); /* Data length in bytes */ + buf[5 + idx] = cpu_to_be32(0x20010000); /* Trigger OCC attention */ + buf[6 + idx] = 0; - rc = sbefifo_submit(occ->sbefifo, buf, 7, buf, &resp_len); + rc = sbefifo_submit(occ->sbefifo, buf, cmd_len, buf, &resp_len); if (rc) goto error; @@ -429,7 +479,7 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len, /* Extract the seq_no from the command (first byte) */ seq_no = *(const u8 *)request; - rc = occ_putsram(occ, OCC_SRAM_CMD_ADDR, request, req_len); + rc = occ_putsram(occ, request, req_len); if (rc) goto done; @@ -440,7 +490,7 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len, /* Read occ response header */ start = jiffies; do { - rc = occ_getsram(occ, OCC_SRAM_RSP_ADDR, resp, 8); + rc = occ_getsram(occ, 0, resp, 8); if (rc) goto done; @@ -476,8 +526,7 @@ int fsi_occ_submit(struct device *dev, const void *request, size_t req_len, /* Grab the rest */ if (resp_data_length > 1) { /* already got 3 bytes resp, also need 2 bytes checksum */ - rc = occ_getsram(occ, OCC_SRAM_RSP_ADDR + 8, - &resp->data[3], resp_data_length - 1); + rc = occ_getsram(occ, 8, &resp->data[3], resp_data_length - 1); if (rc) goto done; } @@ -508,6 +557,7 @@ static int occ_probe(struct platform_device *pdev) struct occ *occ; struct platform_device *hwmon_dev; struct device *dev = &pdev->dev; + const void *md = of_device_get_match_data(dev); struct platform_device_info hwmon_dev_info = { .parent = dev, .name = "occ-hwmon", @@ -517,6 +567,7 @@ static int occ_probe(struct platform_device *pdev) if (!occ) return -ENOMEM; + occ->version = (enum versions)md; occ->dev = dev; occ->sbefifo = dev->parent; mutex_init(&occ->occ_lock); @@ -575,7 +626,14 @@ static int occ_remove(struct platform_device *pdev) } static const struct of_device_id occ_match[] = { - { .compatible = "ibm,p9-occ" }, + { + .compatible = "ibm,p9-occ", + .data = (void *)occ_p9 + }, + { + .compatible = "ibm,p10-occ", + .data = (void *)occ_p10 + }, { }, };
The P10 OCC has a different SRAM address for the command and response buffers. In addition, the SBE commands to access the SRAM have changed format. Add versioning to the driver to handle these differences. Signed-off-by: Eddie James <eajames@linux.ibm.com> --- drivers/fsi/fsi-occ.c | 126 ++++++++++++++++++++++++++++++------------ 1 file changed, 92 insertions(+), 34 deletions(-)