diff mbox series

[2/7] arm64: dts: qcom: sm8250: Add cpufreq hw node

Message ID 20200908075716.30357-3-manivannan.sadhasivam@linaro.org (mailing list archive)
State New, archived
Delegated to: viresh kumar
Headers show
Series Add CPUFreq support for SM8250 SoC | expand

Commit Message

Manivannan Sadhasivam Sept. 8, 2020, 7:57 a.m. UTC
From: Bjorn Andersson <bjorn.andersson@linaro.org>

Add cpufreq HW device node to scale 4-Silver/3-Gold/1-Gold+ cores
on SM8250 SoCs.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

Comments

Viresh Kumar Sept. 8, 2020, 10:39 a.m. UTC | #1
On 08-09-20, 13:27, Manivannan Sadhasivam wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> Add cpufreq HW device node to scale 4-Silver/3-Gold/1-Gold+ cores
> on SM8250 SoCs.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)

You want this to go through my tree or ARM Soc ?
Manivannan Sadhasivam Sept. 8, 2020, 11:08 a.m. UTC | #2
On 0908, Viresh Kumar wrote:
> On 08-09-20, 13:27, Manivannan Sadhasivam wrote:
> > From: Bjorn Andersson <bjorn.andersson@linaro.org>
> > 
> > Add cpufreq HW device node to scale 4-Silver/3-Gold/1-Gold+ cores
> > on SM8250 SoCs.
> > 
> > Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> > ---
> >  arch/arm64/boot/dts/qcom/sm8250.dtsi | 22 ++++++++++++++++++++++
> >  1 file changed, 22 insertions(+)
> 
> You want this to go through my tree or ARM Soc ?
> 

Bjorn will take this through arm-soc. But it would be good if you can provide
the review.

Thanks,
Mani

> -- 
> viresh
Viresh Kumar Sept. 8, 2020, 11:12 a.m. UTC | #3
On 08-09-20, 13:27, Manivannan Sadhasivam wrote:
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
> 
> Add cpufreq HW device node to scale 4-Silver/3-Gold/1-Gold+ cores
> on SM8250 SoCs.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> ---
>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Amit Kucheria Sept. 8, 2020, 11:56 a.m. UTC | #4
On Tue, Sep 8, 2020 at 1:27 PM Manivannan Sadhasivam
<manivannan.sadhasivam@linaro.org> wrote:
>
> From: Bjorn Andersson <bjorn.andersson@linaro.org>
>
> Add cpufreq HW device node to scale 4-Silver/3-Gold/1-Gold+ cores
> on SM8250 SoCs.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>


Reviewed-by: Amit Kucheria <amitk@kernel.org>


> ---
>  arch/arm64/boot/dts/qcom/sm8250.dtsi | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index e7d139e1a6ce..aafb46a26a9c 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -87,6 +87,7 @@
>                         reg = <0x0 0x0>;
>                         enable-method = "psci";
>                         next-level-cache = <&L2_0>;
> +                       qcom,freq-domain = <&cpufreq_hw 0>;
>                         L2_0: l2-cache {
>                               compatible = "cache";
>                               next-level-cache = <&L3_0>;
> @@ -102,6 +103,7 @@
>                         reg = <0x0 0x100>;
>                         enable-method = "psci";
>                         next-level-cache = <&L2_100>;
> +                       qcom,freq-domain = <&cpufreq_hw 0>;
>                         L2_100: l2-cache {
>                               compatible = "cache";
>                               next-level-cache = <&L3_0>;
> @@ -114,6 +116,7 @@
>                         reg = <0x0 0x200>;
>                         enable-method = "psci";
>                         next-level-cache = <&L2_200>;
> +                       qcom,freq-domain = <&cpufreq_hw 0>;
>                         L2_200: l2-cache {
>                               compatible = "cache";
>                               next-level-cache = <&L3_0>;
> @@ -126,6 +129,7 @@
>                         reg = <0x0 0x300>;
>                         enable-method = "psci";
>                         next-level-cache = <&L2_300>;
> +                       qcom,freq-domain = <&cpufreq_hw 0>;
>                         L2_300: l2-cache {
>                               compatible = "cache";
>                               next-level-cache = <&L3_0>;
> @@ -138,6 +142,7 @@
>                         reg = <0x0 0x400>;
>                         enable-method = "psci";
>                         next-level-cache = <&L2_400>;
> +                       qcom,freq-domain = <&cpufreq_hw 1>;
>                         L2_400: l2-cache {
>                               compatible = "cache";
>                               next-level-cache = <&L3_0>;
> @@ -150,6 +155,7 @@
>                         reg = <0x0 0x500>;
>                         enable-method = "psci";
>                         next-level-cache = <&L2_500>;
> +                       qcom,freq-domain = <&cpufreq_hw 1>;
>                         L2_500: l2-cache {
>                               compatible = "cache";
>                               next-level-cache = <&L3_0>;
> @@ -163,6 +169,7 @@
>                         reg = <0x0 0x600>;
>                         enable-method = "psci";
>                         next-level-cache = <&L2_600>;
> +                       qcom,freq-domain = <&cpufreq_hw 1>;
>                         L2_600: l2-cache {
>                               compatible = "cache";
>                               next-level-cache = <&L3_0>;
> @@ -175,6 +182,7 @@
>                         reg = <0x0 0x700>;
>                         enable-method = "psci";
>                         next-level-cache = <&L2_700>;
> +                       qcom,freq-domain = <&cpufreq_hw 2>;
>                         L2_700: l2-cache {
>                               compatible = "cache";
>                               next-level-cache = <&L3_0>;
> @@ -2076,6 +2084,20 @@
>                                 };
>                         };
>                 };
> +
> +               cpufreq_hw: cpufreq@18591000 {
> +                       compatible = "qcom,sm8250-epss";
> +                       reg = <0 0x18591000 0 0x1000>,
> +                             <0 0x18592000 0 0x1000>,
> +                             <0 0x18593000 0 0x1000>;
> +                       reg-names = "freq-domain0", "freq-domain1",
> +                                   "freq-domain2";
> +
> +                       clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
> +                       clock-names = "xo", "alternate";
> +
> +                       #freq-domain-cells = <1>;
> +               };
>         };
>
>         timer {
> --
> 2.17.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index e7d139e1a6ce..aafb46a26a9c 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -87,6 +87,7 @@ 
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			next-level-cache = <&L2_0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_0: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -102,6 +103,7 @@ 
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			next-level-cache = <&L2_100>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_100: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -114,6 +116,7 @@ 
 			reg = <0x0 0x200>;
 			enable-method = "psci";
 			next-level-cache = <&L2_200>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_200: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -126,6 +129,7 @@ 
 			reg = <0x0 0x300>;
 			enable-method = "psci";
 			next-level-cache = <&L2_300>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			L2_300: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -138,6 +142,7 @@ 
 			reg = <0x0 0x400>;
 			enable-method = "psci";
 			next-level-cache = <&L2_400>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_400: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -150,6 +155,7 @@ 
 			reg = <0x0 0x500>;
 			enable-method = "psci";
 			next-level-cache = <&L2_500>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_500: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -163,6 +169,7 @@ 
 			reg = <0x0 0x600>;
 			enable-method = "psci";
 			next-level-cache = <&L2_600>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			L2_600: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -175,6 +182,7 @@ 
 			reg = <0x0 0x700>;
 			enable-method = "psci";
 			next-level-cache = <&L2_700>;
+			qcom,freq-domain = <&cpufreq_hw 2>;
 			L2_700: l2-cache {
 			      compatible = "cache";
 			      next-level-cache = <&L3_0>;
@@ -2076,6 +2084,20 @@ 
 				};
 			};
 		};
+
+		cpufreq_hw: cpufreq@18591000 {
+			compatible = "qcom,sm8250-epss";
+			reg = <0 0x18591000 0 0x1000>,
+			      <0 0x18592000 0 0x1000>,
+			      <0 0x18593000 0 0x1000>;
+			reg-names = "freq-domain0", "freq-domain1",
+				    "freq-domain2";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+		};
 	};
 
 	timer {