diff mbox series

[v2,4/5] spi: spi-mtk-nor: support 36bit dma addressing to mediatek

Message ID 20200918162834.v2.4.Id1cb208392928afc7ceed4de06924243c7858cd0@changeid (mailing list archive)
State Superseded
Headers show
Series spi: spi-mtk-nor: Add mt8192 support. | expand

Commit Message

Ikjoon Jang Sept. 18, 2020, 8:31 a.m. UTC
This patch enables 36bit dma address support to spi-mtk-nor.
Currently 36bit dma addressing is enabled only for mt8192-nor.

Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
---

(no changes since v1)

 drivers/spi/spi-mtk-nor.c | 19 ++++++++++++++++++-
 1 file changed, 18 insertions(+), 1 deletion(-)

Comments

Yingjoe Chen Sept. 19, 2020, 3:26 p.m. UTC | #1
On Fri, 2020-09-18 at 16:31 +0800, Ikjoon Jang wrote:
> This patch enables 36bit dma address support to spi-mtk-nor.
> Currently 36bit dma addressing is enabled only for mt8192-nor.
> 
> Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
> ---
> 
> (no changes since v1)
> 
>  drivers/spi/spi-mtk-nor.c | 19 ++++++++++++++++++-
>  1 file changed, 18 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/spi/spi-mtk-nor.c b/drivers/spi/spi-mtk-nor.c
> index e14798a6e7d0..99dd5dca744e 100644
> --- a/drivers/spi/spi-mtk-nor.c
> +++ b/drivers/spi/spi-mtk-nor.c
> @@ -78,6 +78,8 @@
>  #define MTK_NOR_REG_DMA_FADR		0x71c
>  #define MTK_NOR_REG_DMA_DADR		0x720
>  #define MTK_NOR_REG_DMA_END_DADR	0x724
> +#define MTK_NOR_REG_DMA_DADR_HB		0x738
> +#define MTK_NOR_REG_DMA_END_DADR_HB	0x73c
>  
>  #define MTK_NOR_PRG_MAX_SIZE		6
>  // Reading DMA src/dst addresses have to be 16-byte aligned
> @@ -102,6 +104,7 @@ struct mtk_nor {
>  	unsigned int spi_freq;
>  	bool wbuf_en;
>  	bool has_irq;
> +	bool high_dma;
>  	struct completion op_done;
>  };
>  
> @@ -291,6 +294,11 @@ static int read_dma(struct mtk_nor *sp, u32 from, unsigned int length,
>  	writel(dma_addr, sp->base + MTK_NOR_REG_DMA_DADR);
>  	writel(dma_addr + length, sp->base + MTK_NOR_REG_DMA_END_DADR);
>  
> +	if (sp->high_dma) {
> +		writel(dma_addr >> 32, sp->base + MTK_NOR_REG_DMA_DADR_HB);
> +		writel((dma_addr + length) >> 32, sp->base + MTK_NOR_REG_DMA_END_DADR_HB);
> +	}
> +
>  	if (sp->has_irq) {
>  		reinit_completion(&sp->op_done);
>  		mtk_nor_rmw(sp, MTK_NOR_REG_IRQ_EN, MTK_NOR_IRQ_DMA, 0);
> @@ -594,7 +602,8 @@ static const struct spi_controller_mem_ops mtk_nor_mem_ops = {
>  };
>  
>  static const struct of_device_id mtk_nor_match[] = {
> -	{ .compatible = "mediatek,mt8173-nor" },
> +	{ .compatible = "mediatek,mt8192-nor", .data = (void *)36 },
> +	{ .compatible = "mediatek,mt8173-nor", .data = (void *)32 },
>  	{ /* sentinel */ }
>  };
>  MODULE_DEVICE_TABLE(of, mtk_nor_match);
> @@ -607,6 +616,7 @@ static int mtk_nor_probe(struct platform_device *pdev)
>  	u8 *buffer;
>  	struct clk *spi_clk, *ctlr_clk;
>  	int ret, irq;
> +	unsigned long dma_bits;
>  
>  	base = devm_platform_ioremap_resource(pdev, 0);
>  	if (IS_ERR(base))
> @@ -623,6 +633,13 @@ static int mtk_nor_probe(struct platform_device *pdev)
>  	buffer = devm_kmalloc(&pdev->dev,
>  			      MTK_NOR_BOUNCE_BUF_SIZE + MTK_NOR_DMA_ALIGN,
>  			      GFP_KERNEL);
> +
> +	dma_bits = (unsigned long)of_device_get_match_data(&pdev->dev);
> +	if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(dma_bits))) {
> +		dev_err(&pdev->dev, "failed to set dma mask(%lu)\n", dma_bits);
> +		return -EINVAL;
> +	}
> +

Do we need to set sp->high_dma when we have >32bits DMA?

Joe.C
Ikjoon Jang Sept. 21, 2020, 6:54 a.m. UTC | #2
On Sat, Sep 19, 2020 at 11:26 PM Yingjoe Chen <yingjoe.chen@mediatek.com> wrote:
>
> On Fri, 2020-09-18 at 16:31 +0800, Ikjoon Jang wrote:
> > This patch enables 36bit dma address support to spi-mtk-nor.
> > Currently 36bit dma addressing is enabled only for mt8192-nor.
[snip]
>
> Do we need to set sp->high_dma when we have >32bits DMA?
>

Yes, to do so, you need to add new compatible strings if there are
more SoCs support >32bit other than mt8192
or just ust mt8192-nor for binding.

> Joe.C
diff mbox series

Patch

diff --git a/drivers/spi/spi-mtk-nor.c b/drivers/spi/spi-mtk-nor.c
index e14798a6e7d0..99dd5dca744e 100644
--- a/drivers/spi/spi-mtk-nor.c
+++ b/drivers/spi/spi-mtk-nor.c
@@ -78,6 +78,8 @@ 
 #define MTK_NOR_REG_DMA_FADR		0x71c
 #define MTK_NOR_REG_DMA_DADR		0x720
 #define MTK_NOR_REG_DMA_END_DADR	0x724
+#define MTK_NOR_REG_DMA_DADR_HB		0x738
+#define MTK_NOR_REG_DMA_END_DADR_HB	0x73c
 
 #define MTK_NOR_PRG_MAX_SIZE		6
 // Reading DMA src/dst addresses have to be 16-byte aligned
@@ -102,6 +104,7 @@  struct mtk_nor {
 	unsigned int spi_freq;
 	bool wbuf_en;
 	bool has_irq;
+	bool high_dma;
 	struct completion op_done;
 };
 
@@ -291,6 +294,11 @@  static int read_dma(struct mtk_nor *sp, u32 from, unsigned int length,
 	writel(dma_addr, sp->base + MTK_NOR_REG_DMA_DADR);
 	writel(dma_addr + length, sp->base + MTK_NOR_REG_DMA_END_DADR);
 
+	if (sp->high_dma) {
+		writel(dma_addr >> 32, sp->base + MTK_NOR_REG_DMA_DADR_HB);
+		writel((dma_addr + length) >> 32, sp->base + MTK_NOR_REG_DMA_END_DADR_HB);
+	}
+
 	if (sp->has_irq) {
 		reinit_completion(&sp->op_done);
 		mtk_nor_rmw(sp, MTK_NOR_REG_IRQ_EN, MTK_NOR_IRQ_DMA, 0);
@@ -594,7 +602,8 @@  static const struct spi_controller_mem_ops mtk_nor_mem_ops = {
 };
 
 static const struct of_device_id mtk_nor_match[] = {
-	{ .compatible = "mediatek,mt8173-nor" },
+	{ .compatible = "mediatek,mt8192-nor", .data = (void *)36 },
+	{ .compatible = "mediatek,mt8173-nor", .data = (void *)32 },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mtk_nor_match);
@@ -607,6 +616,7 @@  static int mtk_nor_probe(struct platform_device *pdev)
 	u8 *buffer;
 	struct clk *spi_clk, *ctlr_clk;
 	int ret, irq;
+	unsigned long dma_bits;
 
 	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
@@ -623,6 +633,13 @@  static int mtk_nor_probe(struct platform_device *pdev)
 	buffer = devm_kmalloc(&pdev->dev,
 			      MTK_NOR_BOUNCE_BUF_SIZE + MTK_NOR_DMA_ALIGN,
 			      GFP_KERNEL);
+
+	dma_bits = (unsigned long)of_device_get_match_data(&pdev->dev);
+	if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(dma_bits))) {
+		dev_err(&pdev->dev, "failed to set dma mask(%lu)\n", dma_bits);
+		return -EINVAL;
+	}
+
 	if (!buffer)
 		return -ENOMEM;