| Message ID | 20210317042540.4097078-1-unixbhaskar@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | Miri Korenblit |
| Headers | show |
| Series | wireless: intel: iwlwifi: fw: api: Absolute rudimentary typo fixes in the file power.h | expand |
On 3/16/21 9:25 PM, Bhaskar Chowdhury wrote: > > s/folowing/following/ > s/Celsuis/Celsius/ > s/temerature/temperature/ ...twice > > > Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> > --- > drivers/net/wireless/intel/iwlwifi/fw/api/power.h | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/power.h b/drivers/net/wireless/intel/iwlwifi/fw/api/power.h > index 798417182d54..f7c7852127d3 100644 > --- a/drivers/net/wireless/intel/iwlwifi/fw/api/power.h > +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/power.h > @@ -54,7 +54,7 @@ struct iwl_ltr_config_cmd_v1 { > * @flags: See &enum iwl_ltr_config_flags > * @static_long: static LTR Long register value. > * @static_short: static LTR Short register value. > - * @ltr_cfg_values: LTR parameters table values (in usec) in folowing order: > + * @ltr_cfg_values: LTR parameters table values (in usec) in following order: > * TX, RX, Short Idle, Long Idle. Used only if %LTR_CFG_FLAG_UPDATE_VALUES > * is set. > * @ltr_short_idle_timeout: LTR Short Idle timeout (in usec). Used only if > @@ -493,7 +493,7 @@ union iwl_ppag_table_cmd { > * Roaming Energy Delta Threshold, otherwise use normal Energy Delta > * Threshold. Typical energy threshold is -72dBm. > * @bf_temp_threshold: This threshold determines the type of temperature > - * filtering (Slow or Fast) that is selected (Units are in Celsuis): > + * filtering (Slow or Fast) that is selected (Units are in Celsius): > * If the current temperature is above this threshold - Fast filter > * will be used, If the current temperature is below this threshold - > * Slow filter will be used. > @@ -501,12 +501,12 @@ union iwl_ppag_table_cmd { > * calculated for this and the last passed beacon is greater than this > * threshold. Zero value means that the temperature change is ignored for > * beacon filtering; beacons will not be forced to be sent to driver > - * regardless of whether its temerature has been changed. > + * regardless of whether its temperature has been changed. > * @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values > * calculated for this and the last passed beacon is greater than this > * threshold. Zero value means that the temperature change is ignored for > * beacon filtering; beacons will not be forced to be sent to driver > - * regardless of whether its temerature has been changed. > + * regardless of whether its temperature has been changed. > * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled. > * @bf_debug_flag: beacon filtering debug configuration > * @bf_escape_timer: Send beacons to to driver if no beacons were passed > --
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/api/power.h b/drivers/net/wireless/intel/iwlwifi/fw/api/power.h index 798417182d54..f7c7852127d3 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/api/power.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/api/power.h @@ -54,7 +54,7 @@ struct iwl_ltr_config_cmd_v1 { * @flags: See &enum iwl_ltr_config_flags * @static_long: static LTR Long register value. * @static_short: static LTR Short register value. - * @ltr_cfg_values: LTR parameters table values (in usec) in folowing order: + * @ltr_cfg_values: LTR parameters table values (in usec) in following order: * TX, RX, Short Idle, Long Idle. Used only if %LTR_CFG_FLAG_UPDATE_VALUES * is set. * @ltr_short_idle_timeout: LTR Short Idle timeout (in usec). Used only if @@ -493,7 +493,7 @@ union iwl_ppag_table_cmd { * Roaming Energy Delta Threshold, otherwise use normal Energy Delta * Threshold. Typical energy threshold is -72dBm. * @bf_temp_threshold: This threshold determines the type of temperature - * filtering (Slow or Fast) that is selected (Units are in Celsuis): + * filtering (Slow or Fast) that is selected (Units are in Celsius): * If the current temperature is above this threshold - Fast filter * will be used, If the current temperature is below this threshold - * Slow filter will be used. @@ -501,12 +501,12 @@ union iwl_ppag_table_cmd { * calculated for this and the last passed beacon is greater than this * threshold. Zero value means that the temperature change is ignored for * beacon filtering; beacons will not be forced to be sent to driver - * regardless of whether its temerature has been changed. + * regardless of whether its temperature has been changed. * @bf_temp_slow_filter: Send Beacon to driver if delta in temperature values * calculated for this and the last passed beacon is greater than this * threshold. Zero value means that the temperature change is ignored for * beacon filtering; beacons will not be forced to be sent to driver - * regardless of whether its temerature has been changed. + * regardless of whether its temperature has been changed. * @bf_enable_beacon_filter: 1, beacon filtering is enabled; 0, disabled. * @bf_debug_flag: beacon filtering debug configuration * @bf_escape_timer: Send beacons to to driver if no beacons were passed
s/folowing/following/ s/Celsuis/Celsius/ s/temerature/temperature/ ...twice Signed-off-by: Bhaskar Chowdhury <unixbhaskar@gmail.com> --- drivers/net/wireless/intel/iwlwifi/fw/api/power.h | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) -- 2.30.2