diff mbox series

[v7,3/5] soc: qcom: spm: Implement support for SAWv4.1, SDM630/660 L2 AVS

Message ID 20210622141117.358893-4-angelogioacchino.delregno@somainline.org (mailing list archive)
State Superseded
Headers show
Series Implement SPM/SAW for MSM8998 and SDM6xx | expand

Commit Message

AngeloGioacchino Del Regno June 22, 2021, 2:11 p.m. UTC
Implement the support for SAW v4.1, used in at least MSM8998,
SDM630, SDM660 and APQ variants and, while at it, also add the
configuration for the SDM630/660 Silver and Gold cluster L2
Adaptive Voltage Scaler: this is also one of the prerequisites
to allow the OSM controller to perform DCVS.

Please note that despite there are various "versions" of these
values downstream, these are the only ones that are perfectly
stable on the entire set of tested devices.

Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
---
 drivers/soc/qcom/spm.c | 32 +++++++++++++++++++++++++++++---
 include/soc/qcom/spm.h |  4 +++-
 2 files changed, 32 insertions(+), 4 deletions(-)

Comments

Stephan Gerhold June 22, 2021, 3:14 p.m. UTC | #1
On Tue, Jun 22, 2021 at 04:11:15PM +0200, AngeloGioacchino Del Regno wrote:
> Implement the support for SAW v4.1, used in at least MSM8998,
> SDM630, SDM660 and APQ variants and, while at it, also add the
> configuration for the SDM630/660 Silver and Gold cluster L2
> Adaptive Voltage Scaler: this is also one of the prerequisites
> to allow the OSM controller to perform DCVS.
> 
> Please note that despite there are various "versions" of these
> values downstream, these are the only ones that are perfectly
> stable on the entire set of tested devices.
> 
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>

I can't say much about this platform but I trust that Angelo
knows what he is doing. :) I found the values used here in

https://source.codeaurora.org/quic/la/kernel/msm-4.4/tree/arch/arm/boot/dts/qcom/sdm660-pm.dtsi?h=LA.UM.8.2.r2-04600-sdm660.0&id=c2c950b468079a41c31d819051ffb8d9ad9eac8f

So I think it's okay to provide a (somewhat limited)
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>

> ---
>  drivers/soc/qcom/spm.c | 32 +++++++++++++++++++++++++++++---
>  include/soc/qcom/spm.h |  4 +++-
>  2 files changed, 32 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
> index 9b6f649c9a10..1401db8373dd 100644
> --- a/drivers/soc/qcom/spm.c
> +++ b/drivers/soc/qcom/spm.c
> @@ -32,10 +32,29 @@ enum spm_reg {
>  	SPM_REG_SEQ_ENTRY,
>  	SPM_REG_SPM_STS,
>  	SPM_REG_PMIC_STS,
> +	SPM_REG_AVS_CTL,
> +	SPM_REG_AVS_LIMIT,
>  	SPM_REG_NR,
>  };
>  
> -static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = {
> +static const u16 spm_reg_offset_v4_1[SPM_REG_NR] = {
> +	[SPM_REG_AVS_CTL]	= 0x904,
> +	[SPM_REG_AVS_LIMIT]	= 0x908,
> +};
> +
> +static const struct spm_reg_data spm_reg_660_gold_l2  = {
> +	.reg_offset = spm_reg_offset_v4_1,
> +	.avs_ctl = 0x1010031,
> +	.avs_limit = 0x4580458,
> +};
> +
> +static const struct spm_reg_data spm_reg_660_silver_l2  = {
> +	.reg_offset = spm_reg_offset_v4_1,
> +	.avs_ctl = 0x101c031,
> +	.avs_limit = 0x4580458,
> +};
> +
> +static const u16 spm_reg_offset_v2_1[SPM_REG_NR] = {
>  	[SPM_REG_CFG]		= 0x08,
>  	[SPM_REG_SPM_CTL]	= 0x30,
>  	[SPM_REG_DLY]		= 0x34,
> @@ -54,7 +73,7 @@ static const struct spm_reg_data spm_reg_8974_8084_cpu  = {
>  	.start_index[PM_SLEEP_MODE_SPC] = 3,
>  };
>  
> -static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = {
> +static const u16 spm_reg_offset_v1_1[SPM_REG_NR] = {
>  	[SPM_REG_CFG]		= 0x08,
>  	[SPM_REG_SPM_CTL]	= 0x20,
>  	[SPM_REG_PMIC_DLY]	= 0x24,
> @@ -126,6 +145,10 @@ void spm_set_low_power_mode(struct spm_driver_data *drv,
>  }
>  
>  static const struct of_device_id spm_match_table[] = {
> +	{ .compatible = "qcom,sdm660-gold-saw2-v4.1-l2",
> +	  .data = &spm_reg_660_gold_l2 },
> +	{ .compatible = "qcom,sdm660-silver-saw2-v4.1-l2",
> +	  .data = &spm_reg_660_silver_l2 },
>  	{ .compatible = "qcom,msm8974-saw2-v2.1-cpu",
>  	  .data = &spm_reg_8974_8084_cpu },
>  	{ .compatible = "qcom,apq8084-saw2-v2.1-cpu",
> @@ -169,6 +192,8 @@ static int spm_dev_probe(struct platform_device *pdev)
>  	 * CPU was held in reset, the reset signal could trigger the SPM state
>  	 * machine, before the sequences are completely written.
>  	 */
> +	spm_register_write(drv, SPM_REG_AVS_CTL, drv->reg_data->avs_ctl);
> +	spm_register_write(drv, SPM_REG_AVS_LIMIT, drv->reg_data->avs_limit);
>  	spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg);
>  	spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly);
>  	spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly);
> @@ -178,7 +203,8 @@ static int spm_dev_probe(struct platform_device *pdev)
>  				drv->reg_data->pmic_data[1]);
>  
>  	/* Set up Standby as the default low power mode */
> -	spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
> +	if (drv->reg_data->reg_offset[SPM_REG_SPM_CTL])
> +		spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
>  
>  	return 0;
>  }
> diff --git a/include/soc/qcom/spm.h b/include/soc/qcom/spm.h
> index 4c7e5ac2583d..4951f9d8b0bd 100644
> --- a/include/soc/qcom/spm.h
> +++ b/include/soc/qcom/spm.h
> @@ -21,11 +21,13 @@ enum pm_sleep_mode {
>  };
>  
>  struct spm_reg_data {
> -	const u8 *reg_offset;
> +	const u16 *reg_offset;
>  	u32 spm_cfg;
>  	u32 spm_dly;
>  	u32 pmic_dly;
>  	u32 pmic_data[MAX_PMIC_DATA];
> +	u32 avs_ctl;
> +	u32 avs_limit;
>  	u8 seq[MAX_SEQ_DATA];
>  	u8 start_index[PM_SLEEP_MODE_NR];
>  };
> -- 
> 2.32.0
>
diff mbox series

Patch

diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
index 9b6f649c9a10..1401db8373dd 100644
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/soc/qcom/spm.c
@@ -32,10 +32,29 @@  enum spm_reg {
 	SPM_REG_SEQ_ENTRY,
 	SPM_REG_SPM_STS,
 	SPM_REG_PMIC_STS,
+	SPM_REG_AVS_CTL,
+	SPM_REG_AVS_LIMIT,
 	SPM_REG_NR,
 };
 
-static const u8 spm_reg_offset_v2_1[SPM_REG_NR] = {
+static const u16 spm_reg_offset_v4_1[SPM_REG_NR] = {
+	[SPM_REG_AVS_CTL]	= 0x904,
+	[SPM_REG_AVS_LIMIT]	= 0x908,
+};
+
+static const struct spm_reg_data spm_reg_660_gold_l2  = {
+	.reg_offset = spm_reg_offset_v4_1,
+	.avs_ctl = 0x1010031,
+	.avs_limit = 0x4580458,
+};
+
+static const struct spm_reg_data spm_reg_660_silver_l2  = {
+	.reg_offset = spm_reg_offset_v4_1,
+	.avs_ctl = 0x101c031,
+	.avs_limit = 0x4580458,
+};
+
+static const u16 spm_reg_offset_v2_1[SPM_REG_NR] = {
 	[SPM_REG_CFG]		= 0x08,
 	[SPM_REG_SPM_CTL]	= 0x30,
 	[SPM_REG_DLY]		= 0x34,
@@ -54,7 +73,7 @@  static const struct spm_reg_data spm_reg_8974_8084_cpu  = {
 	.start_index[PM_SLEEP_MODE_SPC] = 3,
 };
 
-static const u8 spm_reg_offset_v1_1[SPM_REG_NR] = {
+static const u16 spm_reg_offset_v1_1[SPM_REG_NR] = {
 	[SPM_REG_CFG]		= 0x08,
 	[SPM_REG_SPM_CTL]	= 0x20,
 	[SPM_REG_PMIC_DLY]	= 0x24,
@@ -126,6 +145,10 @@  void spm_set_low_power_mode(struct spm_driver_data *drv,
 }
 
 static const struct of_device_id spm_match_table[] = {
+	{ .compatible = "qcom,sdm660-gold-saw2-v4.1-l2",
+	  .data = &spm_reg_660_gold_l2 },
+	{ .compatible = "qcom,sdm660-silver-saw2-v4.1-l2",
+	  .data = &spm_reg_660_silver_l2 },
 	{ .compatible = "qcom,msm8974-saw2-v2.1-cpu",
 	  .data = &spm_reg_8974_8084_cpu },
 	{ .compatible = "qcom,apq8084-saw2-v2.1-cpu",
@@ -169,6 +192,8 @@  static int spm_dev_probe(struct platform_device *pdev)
 	 * CPU was held in reset, the reset signal could trigger the SPM state
 	 * machine, before the sequences are completely written.
 	 */
+	spm_register_write(drv, SPM_REG_AVS_CTL, drv->reg_data->avs_ctl);
+	spm_register_write(drv, SPM_REG_AVS_LIMIT, drv->reg_data->avs_limit);
 	spm_register_write(drv, SPM_REG_CFG, drv->reg_data->spm_cfg);
 	spm_register_write(drv, SPM_REG_DLY, drv->reg_data->spm_dly);
 	spm_register_write(drv, SPM_REG_PMIC_DLY, drv->reg_data->pmic_dly);
@@ -178,7 +203,8 @@  static int spm_dev_probe(struct platform_device *pdev)
 				drv->reg_data->pmic_data[1]);
 
 	/* Set up Standby as the default low power mode */
-	spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
+	if (drv->reg_data->reg_offset[SPM_REG_SPM_CTL])
+		spm_set_low_power_mode(drv, PM_SLEEP_MODE_STBY);
 
 	return 0;
 }
diff --git a/include/soc/qcom/spm.h b/include/soc/qcom/spm.h
index 4c7e5ac2583d..4951f9d8b0bd 100644
--- a/include/soc/qcom/spm.h
+++ b/include/soc/qcom/spm.h
@@ -21,11 +21,13 @@  enum pm_sleep_mode {
 };
 
 struct spm_reg_data {
-	const u8 *reg_offset;
+	const u16 *reg_offset;
 	u32 spm_cfg;
 	u32 spm_dly;
 	u32 pmic_dly;
 	u32 pmic_data[MAX_PMIC_DATA];
+	u32 avs_ctl;
+	u32 avs_limit;
 	u8 seq[MAX_SEQ_DATA];
 	u8 start_index[PM_SLEEP_MODE_NR];
 };