diff mbox series

[v6,2/4] crypto: starfive - Add crypto engine support

Message ID 20230426065848.842221-3-jiajie.ho@starfivetech.com (mailing list archive)
State Superseded
Headers show
Series crypto: starfive - Add drivers for crypto engine | expand

Checks

Context Check Description
conchuod/tree_selection fail Failed to apply to next/pending-fixes or riscv/for-next

Commit Message

Jia Jie Ho April 26, 2023, 6:58 a.m. UTC
Adding device probe and DMA init for StarFive cryptographic module.

Co-developed-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Huan Feng <huan.feng@starfivetech.com>
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
---
 MAINTAINERS                           |   7 +
 drivers/crypto/Kconfig                |   1 +
 drivers/crypto/Makefile               |   1 +
 drivers/crypto/starfive/Kconfig       |  17 +++
 drivers/crypto/starfive/Makefile      |   4 +
 drivers/crypto/starfive/jh7110-cryp.c | 199 ++++++++++++++++++++++++++
 drivers/crypto/starfive/jh7110-cryp.h |  63 ++++++++
 7 files changed, 292 insertions(+)
 create mode 100644 drivers/crypto/starfive/Kconfig
 create mode 100644 drivers/crypto/starfive/Makefile
 create mode 100644 drivers/crypto/starfive/jh7110-cryp.c
 create mode 100644 drivers/crypto/starfive/jh7110-cryp.h

Comments

Christophe JAILLET April 26, 2023, 7:56 a.m. UTC | #1
Le 26/04/2023 à 08:58, Jia Jie Ho a écrit :
> Adding device probe and DMA init for StarFive cryptographic module.
> 
> Co-developed-by: Huan Feng <huan.feng-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>
> Signed-off-by: Huan Feng <huan.feng-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>
> Signed-off-by: Jia Jie Ho <jiajie.ho-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>
> ---
>   MAINTAINERS                           |   7 +
>   drivers/crypto/Kconfig                |   1 +
>   drivers/crypto/Makefile               |   1 +
>   drivers/crypto/starfive/Kconfig       |  17 +++
>   drivers/crypto/starfive/Makefile      |   4 +
>   drivers/crypto/starfive/jh7110-cryp.c | 199 ++++++++++++++++++++++++++
>   drivers/crypto/starfive/jh7110-cryp.h |  63 ++++++++
>   7 files changed, 292 insertions(+)
>   create mode 100644 drivers/crypto/starfive/Kconfig
>   create mode 100644 drivers/crypto/starfive/Makefile
>   create mode 100644 drivers/crypto/starfive/jh7110-cryp.c
>   create mode 100644 drivers/crypto/starfive/jh7110-cryp.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 65140500d9f8..a6f7677db4db 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19609,6 +19609,13 @@ F:	Documentation/devicetree/bindings/clock/starfive*
>   F:	drivers/clk/starfive/
>   F:	include/dt-bindings/clock/starfive*
>   
> +STARFIVE CRYPTO DRIVER
> +M:	Jia Jie Ho <jiajie.ho-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>
> +M:	William Qiu <william.qiu-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>
> +S:	Supported
> +F:	Documentation/devicetree/bindings/crypto/starfive*
> +F:	drivers/crypto/starfive/
> +
>   STARFIVE PINCTRL DRIVER
>   M:	Emil Renner Berthing <kernel-sKpHZLTYfq0@public.gmane.org>
>   M:	Jianlong Huang <jianlong.huang-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>
> diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
> index 55e75fbb658e..64b94376601c 100644
> --- a/drivers/crypto/Kconfig
> +++ b/drivers/crypto/Kconfig
> @@ -817,5 +817,6 @@ config CRYPTO_DEV_SA2UL
>   
>   source "drivers/crypto/keembay/Kconfig"
>   source "drivers/crypto/aspeed/Kconfig"
> +source "drivers/crypto/starfive/Kconfig"
>   
>   endif # CRYPTO_HW
> diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
> index 116de173a66c..212931c84412 100644
> --- a/drivers/crypto/Makefile
> +++ b/drivers/crypto/Makefile
> @@ -53,3 +53,4 @@ obj-y += xilinx/
>   obj-y += hisilicon/
>   obj-$(CONFIG_CRYPTO_DEV_AMLOGIC_GXL) += amlogic/
>   obj-y += keembay/
> +obj-y += starfive/
> diff --git a/drivers/crypto/starfive/Kconfig b/drivers/crypto/starfive/Kconfig
> new file mode 100644
> index 000000000000..73f39b6bc09f
> --- /dev/null
> +++ b/drivers/crypto/starfive/Kconfig
> @@ -0,0 +1,17 @@
> +#
> +# StarFive crypto drivers configuration
> +#
> +
> +config CRYPTO_DEV_JH7110
> +	tristate "StarFive JH7110 cryptographic engine driver"
> +	depends on SOC_STARFIVE
> +	select CRYPTO_ENGINE
> +	select ARM_AMBA
> +	select DMADEVICES
> +	select AMBA_PL08X
> +	help
> +	  Support for StarFive JH7110 crypto hardware acceleration engine.
> +	  This module provides acceleration for public key algo,
> +	  skciphers, AEAD and hash functions.
> +
> +	  If you choose 'M' here, this module will be called starfive-crypto.
> diff --git a/drivers/crypto/starfive/Makefile b/drivers/crypto/starfive/Makefile
> new file mode 100644
> index 000000000000..41221acaee39
> --- /dev/null
> +++ b/drivers/crypto/starfive/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +obj-$(CONFIG_CRYPTO_DEV_JH7110) += jh7110-crypto.o
> +jh7110-crypto-objs := jh7110-cryp.o
> diff --git a/drivers/crypto/starfive/jh7110-cryp.c b/drivers/crypto/starfive/jh7110-cryp.c
> new file mode 100644
> index 000000000000..a944897609a2
> --- /dev/null
> +++ b/drivers/crypto/starfive/jh7110-cryp.c
> @@ -0,0 +1,199 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Cryptographic API.
> + *
> + * Support for StarFive hardware cryptographic engine.
> + * Copyright (c) 2022 StarFive Technology
> + *
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/iopoll.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +
> +#include "jh7110-cryp.h"
> +
> +#define DRIVER_NAME             "starfive-crypto"
> +
> +struct starfive_dev_list {
> +	struct list_head        dev_list;
> +	spinlock_t              lock; /* protect dev_list */
> +};
> +
> +static struct starfive_dev_list dev_list = {
> +	.dev_list = LIST_HEAD_INIT(dev_list.dev_list),
> +	.lock     = __SPIN_LOCK_UNLOCKED(dev_list.lock),
> +};
> +
> +struct starfive_cryp_dev *starfive_cryp_find_dev(struct starfive_cryp_ctx *ctx)
> +{
> +	struct starfive_cryp_dev *cryp = NULL, *tmp;
> +
> +	spin_lock_bh(&dev_list.lock);
> +	if (!ctx->cryp) {
> +		list_for_each_entry(tmp, &dev_list.dev_list, list) {
> +			cryp = tmp;
> +			break;
> +		}
> +		ctx->cryp = cryp;
> +	} else {
> +		cryp = ctx->cryp;
> +	}
> +
> +	spin_unlock_bh(&dev_list.lock);
> +
> +	return cryp;
> +}
> +
> +static int starfive_dma_init(struct starfive_cryp_dev *cryp)
> +{
> +	dma_cap_mask_t mask;
> +
> +	cryp->tx = NULL;
> +	cryp->rx = NULL;

Harmless, but 'crypt' is kzalloc()'ed, so these fields are already NULL.

> +
> +	dma_cap_zero(mask);
> +	dma_cap_set(DMA_SLAVE, mask);
> +
> +	cryp->tx = dma_request_chan(cryp->dev, "tx");
> +	if (IS_ERR(cryp->tx))
> +		return dev_err_probe(cryp->dev, PTR_ERR(cryp->tx),
> +				     "Error requesting tx dma channel.\n");
> +
> +	cryp->rx = dma_request_chan(cryp->dev, "rx");
> +	if (IS_ERR(cryp->rx)) {
> +		dma_release_channel(cryp->tx);
> +		return dev_err_probe(cryp->dev, PTR_ERR(cryp->rx),
> +				     "Error requesting rx dma channel.\n");
> +	}
> +
> +	return 0;
> +}
> +
> +static void starfive_dma_cleanup(struct starfive_cryp_dev *cryp)
> +{
> +	dma_release_channel(cryp->tx);
> +	dma_release_channel(cryp->rx);
> +}
> +
> +static int starfive_cryp_probe(struct platform_device *pdev)
> +{
> +	struct starfive_cryp_dev *cryp;
> +	struct resource *res;
> +	int ret;
> +
> +	cryp = devm_kzalloc(&pdev->dev, sizeof(*cryp), GFP_KERNEL);
> +	if (!cryp)
> +		return -ENOMEM;
> +
> +	platform_set_drvdata(pdev, cryp);
> +	cryp->dev = &pdev->dev;
> +
> +	cryp->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
> +	if (IS_ERR(cryp->base))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(cryp->base),
> +				     "Error remapping memory for platform device\n");
> +
> +	cryp->phys_base = res->start;
> +	cryp->dma_maxburst = 32;
> +
> +	cryp->hclk = devm_clk_get(&pdev->dev, "hclk");
> +	if (IS_ERR(cryp->hclk))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(cryp->hclk),
> +				     "Error getting hardware reference clock\n");
> +
> +	cryp->ahb = devm_clk_get(&pdev->dev, "ahb");
> +	if (IS_ERR(cryp->ahb))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(cryp->ahb),
> +				     "Error getting ahb reference clock\n");
> +
> +	cryp->rst = devm_reset_control_get_shared(cryp->dev, NULL);
> +	if (IS_ERR(cryp->rst))
> +		return dev_err_probe(&pdev->dev, PTR_ERR(cryp->rst),
> +				     "Error getting hardware reset line\n");
> +
> +	clk_prepare_enable(cryp->hclk);
> +	clk_prepare_enable(cryp->ahb);
> +	reset_control_deassert(cryp->rst);
> +
> +	spin_lock(&dev_list.lock);
> +	list_add(&cryp->list, &dev_list.dev_list);
> +	spin_unlock(&dev_list.lock);
> +
> +	ret = starfive_dma_init(cryp);
> +	if (ret)
> +		goto err_dma_init;
> +
> +	/* Initialize crypto engine */
> +	cryp->engine = crypto_engine_alloc_init(&pdev->dev, 1);
> +	if (!cryp->engine) {
> +		ret = -ENOMEM;
> +		goto err_engine;
> +	}
> +
> +	ret = crypto_engine_start(cryp->engine);
> +	if (ret)
> +		goto err_engine_start;
> +
> +	return 0;
> +
> +err_engine_start:
> +	crypto_engine_exit(cryp->engine);
> +err_engine:
> +	starfive_dma_cleanup(cryp);
> +err_dma_init:
> +	spin_lock(&dev_list.lock);
> +	list_del(&cryp->list);
> +	spin_unlock(&dev_list.lock);

I think that there should be:
	clk_disable_unprepare(cryp->hclk);
	clk_disable_unprepare(cryp->ahb);
	reset_control_assert(cryp->rst);

as in the remove function.

> +
> +	return ret;
> +}
> +
> +static int starfive_cryp_remove(struct platform_device *pdev)
> +{
> +	struct starfive_cryp_dev *cryp = platform_get_drvdata(pdev);
> +
> +	if (!cryp)
> +		return -ENODEV;

I don't think that this can happen.

CJ

> +
> +	crypto_engine_stop(cryp->engine);
> +	crypto_engine_exit(cryp->engine);
> +
> +	starfive_dma_cleanup(cryp);
> +
> +	spin_lock(&dev_list.lock);
> +	list_del(&cryp->list);
> +	spin_unlock(&dev_list.lock);
> +
> +	clk_disable_unprepare(cryp->hclk);
> +	clk_disable_unprepare(cryp->ahb);
> +	reset_control_assert(cryp->rst);
> +
> +	return 0;
> +}
> +
> +static const struct of_device_id starfive_dt_ids[] __maybe_unused = {
> +	{ .compatible = "starfive,jh7110-crypto", .data = NULL},
> +	{},
> +};
> +MODULE_DEVICE_TABLE(of, starfive_dt_ids);
> +
> +static struct platform_driver starfive_cryp_driver = {
> +	.probe  = starfive_cryp_probe,
> +	.remove = starfive_cryp_remove,
> +	.driver = {
> +		.name           = DRIVER_NAME,
> +		.of_match_table = starfive_dt_ids,
> +	},
> +};
> +
> +module_platform_driver(starfive_cryp_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("StarFive Cryptographic Module");
> diff --git a/drivers/crypto/starfive/jh7110-cryp.h b/drivers/crypto/starfive/jh7110-cryp.h
> new file mode 100644
> index 000000000000..393efd38b098
> --- /dev/null
> +++ b/drivers/crypto/starfive/jh7110-cryp.h
> @@ -0,0 +1,63 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +#ifndef __STARFIVE_STR_H__
> +#define __STARFIVE_STR_H__
> +
> +#include <linux/delay.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/dmaengine.h>
> +
> +#include <crypto/engine.h>
> +
> +#define STARFIVE_ALG_CR_OFFSET			0x0
> +#define STARFIVE_ALG_FIFO_OFFSET		0x4
> +#define STARFIVE_IE_MASK_OFFSET			0x8
> +#define STARFIVE_IE_FLAG_OFFSET			0xc
> +#define STARFIVE_DMA_IN_LEN_OFFSET		0x10
> +#define STARFIVE_DMA_OUT_LEN_OFFSET		0x14
> +
> +#define STARFIVE_MSG_BUFFER_SIZE		SZ_16K
> +
> +union starfive_alg_cr {
> +	u32 v;
> +	struct {
> +		u32 start			:1;
> +		u32 aes_dma_en			:1;
> +		u32 rsvd_0			:1;
> +		u32 hash_dma_en			:1;
> +		u32 alg_done			:1;
> +		u32 rsvd_1			:3;
> +		u32 clear			:1;
> +		u32 rsvd_2			:23;
> +	};
> +};
> +
> +struct starfive_cryp_ctx {
> +	struct crypto_engine_ctx		enginectx;
> +	struct starfive_cryp_dev		*cryp;
> +};
> +
> +struct starfive_cryp_dev {
> +	struct list_head			list;
> +	struct device				*dev;
> +
> +	struct clk				*hclk;
> +	struct clk				*ahb;
> +	struct reset_control			*rst;
> +
> +	void __iomem				*base;
> +	phys_addr_t				phys_base;
> +
> +	u32					dma_maxburst;
> +	struct dma_chan				*tx;
> +	struct dma_chan				*rx;
> +	struct dma_slave_config			cfg_in;
> +	struct dma_slave_config			cfg_out;
> +
> +	struct crypto_engine			*engine;
> +
> +	union starfive_alg_cr			alg_cr;
> +};
> +
> +struct starfive_cryp_dev *starfive_cryp_find_dev(struct starfive_cryp_ctx *ctx);
> +
> +#endif
Christophe JAILLET April 26, 2023, 8:09 a.m. UTC | #2
Le 26/04/2023 à 08:58, Jia Jie Ho a écrit :
> Adding device probe and DMA init for StarFive cryptographic module.
> 
> Co-developed-by: Huan Feng <huan.feng-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>
> Signed-off-by: Huan Feng <huan.feng-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>
> Signed-off-by: Jia Jie Ho <jiajie.ho-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>
> ---
>   MAINTAINERS                           |   7 +
>   drivers/crypto/Kconfig                |   1 +
>   drivers/crypto/Makefile               |   1 +
>   drivers/crypto/starfive/Kconfig       |  17 +++
>   drivers/crypto/starfive/Makefile      |   4 +
>   drivers/crypto/starfive/jh7110-cryp.c | 199 ++++++++++++++++++++++++++
>   drivers/crypto/starfive/jh7110-cryp.h |  63 ++++++++
>   7 files changed, 292 insertions(+)
>   create mode 100644 drivers/crypto/starfive/Kconfig
>   create mode 100644 drivers/crypto/starfive/Makefile
>   create mode 100644 drivers/crypto/starfive/jh7110-cryp.c
>   create mode 100644 drivers/crypto/starfive/jh7110-cryp.h
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 65140500d9f8..a6f7677db4db 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19609,6 +19609,13 @@ F:	Documentation/devicetree/bindings/clock/starfive*
>   F:	drivers/clk/starfive/
>   F:	include/dt-bindings/clock/starfive*
>   
> +STARFIVE CRYPTO DRIVER
> +M:	Jia Jie Ho <jiajie.ho-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>
> +M:	William Qiu <william.qiu-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>
> +S:	Supported
> +F:	Documentation/devicetree/bindings/crypto/starfive*
> +F:	drivers/crypto/starfive/
> +
>   STARFIVE PINCTRL DRIVER
>   M:	Emil Renner Berthing <kernel-sKpHZLTYfq0@public.gmane.org>
>   M:	Jianlong Huang <jianlong.huang-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>
> diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
> index 55e75fbb658e..64b94376601c 100644
> --- a/drivers/crypto/Kconfig
> +++ b/drivers/crypto/Kconfig
> @@ -817,5 +817,6 @@ config CRYPTO_DEV_SA2UL
>   
>   source "drivers/crypto/keembay/Kconfig"
>   source "drivers/crypto/aspeed/Kconfig"
> +source "drivers/crypto/starfive/Kconfig"
>   
>   endif # CRYPTO_HW
> diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
> index 116de173a66c..212931c84412 100644
> --- a/drivers/crypto/Makefile
> +++ b/drivers/crypto/Makefile
> @@ -53,3 +53,4 @@ obj-y += xilinx/
>   obj-y += hisilicon/
>   obj-$(CONFIG_CRYPTO_DEV_AMLOGIC_GXL) += amlogic/
>   obj-y += keembay/
> +obj-y += starfive/
> diff --git a/drivers/crypto/starfive/Kconfig b/drivers/crypto/starfive/Kconfig
> new file mode 100644
> index 000000000000..73f39b6bc09f
> --- /dev/null
> +++ b/drivers/crypto/starfive/Kconfig
> @@ -0,0 +1,17 @@
> +#
> +# StarFive crypto drivers configuration
> +#
> +
> +config CRYPTO_DEV_JH7110
> +	tristate "StarFive JH7110 cryptographic engine driver"
> +	depends on SOC_STARFIVE
> +	select CRYPTO_ENGINE
> +	select ARM_AMBA
> +	select DMADEVICES
> +	select AMBA_PL08X
> +	help
> +	  Support for StarFive JH7110 crypto hardware acceleration engine.
> +	  This module provides acceleration for public key algo,
> +	  skciphers, AEAD and hash functions.
> +
> +	  If you choose 'M' here, this module will be called starfive-crypto.


jh7110-cryp?


> diff --git a/drivers/crypto/starfive/Makefile b/drivers/crypto/starfive/Makefile
> new file mode 100644
> index 000000000000..41221acaee39
> --- /dev/null
> +++ b/drivers/crypto/starfive/Makefile
> @@ -0,0 +1,4 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +obj-$(CONFIG_CRYPTO_DEV_JH7110) += jh7110-crypto.o
> +jh7110-crypto-objs := jh7110-cryp.o
Jia Jie Ho April 27, 2023, 5:06 a.m. UTC | #3
On 26/4/2023 3:56 pm, Christophe JAILLET wrote:
> Le 26/04/2023 à 08:58, Jia Jie Ho a écrit :
>> Adding device probe and DMA init for StarFive cryptographic module.
>>
>> Co-developed-by: Huan Feng <huan.feng-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>
>> Signed-off-by: Huan Feng <huan.feng-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>
>> Signed-off-by: Jia Jie Ho <jiajie.ho-bONrM45KWFOXmMXjJBpWqg@public.gmane.org>
>> ---
>>   MAINTAINERS                           |   7 +
>>   drivers/crypto/Kconfig                |   1 +
>>   drivers/crypto/Makefile               |   1 +
>>   drivers/crypto/starfive/Kconfig       |  17 +++
>>   drivers/crypto/starfive/Makefile      |   4 +
>>   drivers/crypto/starfive/jh7110-cryp.c | 199 ++++++++++++++++++++++++++
>>   drivers/crypto/starfive/jh7110-cryp.h |  63 ++++++++
>>   7 files changed, 292 insertions(+)
>>   create mode 100644 drivers/crypto/starfive/Kconfig
>>   create mode 100644 drivers/crypto/starfive/Makefile
>>   create mode 100644 drivers/crypto/starfive/jh7110-cryp.c
>>   create mode 100644 drivers/crypto/starfive/jh7110-cryp.h
>>

[...]

>> +
>> +static int starfive_dma_init(struct starfive_cryp_dev *cryp)
>> +{
>> +    dma_cap_mask_t mask;
>> +
>> +    cryp->tx = NULL;
>> +    cryp->rx = NULL;
> 
> Harmless, but 'crypt' is kzalloc()'ed, so these fields are already NULL.
>

Hi Christophe,
I'll remove these in the next version.
 
>> +
>> +    dma_cap_zero(mask);
>> +    dma_cap_set(DMA_SLAVE, mask);
>> +
>> +    cryp->tx = dma_request_chan(cryp->dev, "tx");
>> +    if (IS_ERR(cryp->tx))
>> +        return dev_err_probe(cryp->dev, PTR_ERR(cryp->tx),
>> +                     "Error requesting tx dma channel.\n");
>> +
>> +    cryp->rx = dma_request_chan(cryp->dev, "rx");
>> +    if (IS_ERR(cryp->rx)) {
>> +        dma_release_channel(cryp->tx);
>> +        return dev_err_probe(cryp->dev, PTR_ERR(cryp->rx),
>> +                     "Error requesting rx dma channel.\n");
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +static void starfive_dma_cleanup(struct starfive_cryp_dev *cryp)
>> +{
>> +    dma_release_channel(cryp->tx);
>> +    dma_release_channel(cryp->rx);
>> +}
>> +
>> +static int starfive_cryp_probe(struct platform_device *pdev)
>> +{

[...]

>> +
>> +    ret = crypto_engine_start(cryp->engine);
>> +    if (ret)
>> +        goto err_engine_start;
>> +
>> +    return 0;
>> +
>> +err_engine_start:
>> +    crypto_engine_exit(cryp->engine);
>> +err_engine:
>> +    starfive_dma_cleanup(cryp);
>> +err_dma_init:
>> +    spin_lock(&dev_list.lock);
>> +    list_del(&cryp->list);
>> +    spin_unlock(&dev_list.lock);
> 
> I think that there should be:
>     clk_disable_unprepare(cryp->hclk);
>     clk_disable_unprepare(cryp->ahb);
>     reset_control_assert(cryp->rst);
> 
> as in the remove function.
> 

Will add these in next version.

>> +
>> +    return ret;
>> +}
>> +
>> +static int starfive_cryp_remove(struct platform_device *pdev)
>> +{
>> +    struct starfive_cryp_dev *cryp = platform_get_drvdata(pdev);
>> +
>> +    if (!cryp)
>> +        return -ENODEV;
> 
> I don't think that this can happen.
> 

I'll update this too along with your other comments.
Thanks for taking time reviewing this patch series.

Best regards,
Jia Jie
diff mbox series

Patch

diff --git a/MAINTAINERS b/MAINTAINERS
index 65140500d9f8..a6f7677db4db 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19609,6 +19609,13 @@  F:	Documentation/devicetree/bindings/clock/starfive*
 F:	drivers/clk/starfive/
 F:	include/dt-bindings/clock/starfive*
 
+STARFIVE CRYPTO DRIVER
+M:	Jia Jie Ho <jiajie.ho@starfivetech.com>
+M:	William Qiu <william.qiu@starfivetech.com>
+S:	Supported
+F:	Documentation/devicetree/bindings/crypto/starfive*
+F:	drivers/crypto/starfive/
+
 STARFIVE PINCTRL DRIVER
 M:	Emil Renner Berthing <kernel@esmil.dk>
 M:	Jianlong Huang <jianlong.huang@starfivetech.com>
diff --git a/drivers/crypto/Kconfig b/drivers/crypto/Kconfig
index 55e75fbb658e..64b94376601c 100644
--- a/drivers/crypto/Kconfig
+++ b/drivers/crypto/Kconfig
@@ -817,5 +817,6 @@  config CRYPTO_DEV_SA2UL
 
 source "drivers/crypto/keembay/Kconfig"
 source "drivers/crypto/aspeed/Kconfig"
+source "drivers/crypto/starfive/Kconfig"
 
 endif # CRYPTO_HW
diff --git a/drivers/crypto/Makefile b/drivers/crypto/Makefile
index 116de173a66c..212931c84412 100644
--- a/drivers/crypto/Makefile
+++ b/drivers/crypto/Makefile
@@ -53,3 +53,4 @@  obj-y += xilinx/
 obj-y += hisilicon/
 obj-$(CONFIG_CRYPTO_DEV_AMLOGIC_GXL) += amlogic/
 obj-y += keembay/
+obj-y += starfive/
diff --git a/drivers/crypto/starfive/Kconfig b/drivers/crypto/starfive/Kconfig
new file mode 100644
index 000000000000..73f39b6bc09f
--- /dev/null
+++ b/drivers/crypto/starfive/Kconfig
@@ -0,0 +1,17 @@ 
+#
+# StarFive crypto drivers configuration
+#
+
+config CRYPTO_DEV_JH7110
+	tristate "StarFive JH7110 cryptographic engine driver"
+	depends on SOC_STARFIVE
+	select CRYPTO_ENGINE
+	select ARM_AMBA
+	select DMADEVICES
+	select AMBA_PL08X
+	help
+	  Support for StarFive JH7110 crypto hardware acceleration engine.
+	  This module provides acceleration for public key algo,
+	  skciphers, AEAD and hash functions.
+
+	  If you choose 'M' here, this module will be called starfive-crypto.
diff --git a/drivers/crypto/starfive/Makefile b/drivers/crypto/starfive/Makefile
new file mode 100644
index 000000000000..41221acaee39
--- /dev/null
+++ b/drivers/crypto/starfive/Makefile
@@ -0,0 +1,4 @@ 
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_CRYPTO_DEV_JH7110) += jh7110-crypto.o
+jh7110-crypto-objs := jh7110-cryp.o
diff --git a/drivers/crypto/starfive/jh7110-cryp.c b/drivers/crypto/starfive/jh7110-cryp.c
new file mode 100644
index 000000000000..a944897609a2
--- /dev/null
+++ b/drivers/crypto/starfive/jh7110-cryp.c
@@ -0,0 +1,199 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Cryptographic API.
+ *
+ * Support for StarFive hardware cryptographic engine.
+ * Copyright (c) 2022 StarFive Technology
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+
+#include "jh7110-cryp.h"
+
+#define DRIVER_NAME             "starfive-crypto"
+
+struct starfive_dev_list {
+	struct list_head        dev_list;
+	spinlock_t              lock; /* protect dev_list */
+};
+
+static struct starfive_dev_list dev_list = {
+	.dev_list = LIST_HEAD_INIT(dev_list.dev_list),
+	.lock     = __SPIN_LOCK_UNLOCKED(dev_list.lock),
+};
+
+struct starfive_cryp_dev *starfive_cryp_find_dev(struct starfive_cryp_ctx *ctx)
+{
+	struct starfive_cryp_dev *cryp = NULL, *tmp;
+
+	spin_lock_bh(&dev_list.lock);
+	if (!ctx->cryp) {
+		list_for_each_entry(tmp, &dev_list.dev_list, list) {
+			cryp = tmp;
+			break;
+		}
+		ctx->cryp = cryp;
+	} else {
+		cryp = ctx->cryp;
+	}
+
+	spin_unlock_bh(&dev_list.lock);
+
+	return cryp;
+}
+
+static int starfive_dma_init(struct starfive_cryp_dev *cryp)
+{
+	dma_cap_mask_t mask;
+
+	cryp->tx = NULL;
+	cryp->rx = NULL;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	cryp->tx = dma_request_chan(cryp->dev, "tx");
+	if (IS_ERR(cryp->tx))
+		return dev_err_probe(cryp->dev, PTR_ERR(cryp->tx),
+				     "Error requesting tx dma channel.\n");
+
+	cryp->rx = dma_request_chan(cryp->dev, "rx");
+	if (IS_ERR(cryp->rx)) {
+		dma_release_channel(cryp->tx);
+		return dev_err_probe(cryp->dev, PTR_ERR(cryp->rx),
+				     "Error requesting rx dma channel.\n");
+	}
+
+	return 0;
+}
+
+static void starfive_dma_cleanup(struct starfive_cryp_dev *cryp)
+{
+	dma_release_channel(cryp->tx);
+	dma_release_channel(cryp->rx);
+}
+
+static int starfive_cryp_probe(struct platform_device *pdev)
+{
+	struct starfive_cryp_dev *cryp;
+	struct resource *res;
+	int ret;
+
+	cryp = devm_kzalloc(&pdev->dev, sizeof(*cryp), GFP_KERNEL);
+	if (!cryp)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, cryp);
+	cryp->dev = &pdev->dev;
+
+	cryp->base = devm_platform_get_and_ioremap_resource(pdev, 0, &res);
+	if (IS_ERR(cryp->base))
+		return dev_err_probe(&pdev->dev, PTR_ERR(cryp->base),
+				     "Error remapping memory for platform device\n");
+
+	cryp->phys_base = res->start;
+	cryp->dma_maxburst = 32;
+
+	cryp->hclk = devm_clk_get(&pdev->dev, "hclk");
+	if (IS_ERR(cryp->hclk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(cryp->hclk),
+				     "Error getting hardware reference clock\n");
+
+	cryp->ahb = devm_clk_get(&pdev->dev, "ahb");
+	if (IS_ERR(cryp->ahb))
+		return dev_err_probe(&pdev->dev, PTR_ERR(cryp->ahb),
+				     "Error getting ahb reference clock\n");
+
+	cryp->rst = devm_reset_control_get_shared(cryp->dev, NULL);
+	if (IS_ERR(cryp->rst))
+		return dev_err_probe(&pdev->dev, PTR_ERR(cryp->rst),
+				     "Error getting hardware reset line\n");
+
+	clk_prepare_enable(cryp->hclk);
+	clk_prepare_enable(cryp->ahb);
+	reset_control_deassert(cryp->rst);
+
+	spin_lock(&dev_list.lock);
+	list_add(&cryp->list, &dev_list.dev_list);
+	spin_unlock(&dev_list.lock);
+
+	ret = starfive_dma_init(cryp);
+	if (ret)
+		goto err_dma_init;
+
+	/* Initialize crypto engine */
+	cryp->engine = crypto_engine_alloc_init(&pdev->dev, 1);
+	if (!cryp->engine) {
+		ret = -ENOMEM;
+		goto err_engine;
+	}
+
+	ret = crypto_engine_start(cryp->engine);
+	if (ret)
+		goto err_engine_start;
+
+	return 0;
+
+err_engine_start:
+	crypto_engine_exit(cryp->engine);
+err_engine:
+	starfive_dma_cleanup(cryp);
+err_dma_init:
+	spin_lock(&dev_list.lock);
+	list_del(&cryp->list);
+	spin_unlock(&dev_list.lock);
+
+	return ret;
+}
+
+static int starfive_cryp_remove(struct platform_device *pdev)
+{
+	struct starfive_cryp_dev *cryp = platform_get_drvdata(pdev);
+
+	if (!cryp)
+		return -ENODEV;
+
+	crypto_engine_stop(cryp->engine);
+	crypto_engine_exit(cryp->engine);
+
+	starfive_dma_cleanup(cryp);
+
+	spin_lock(&dev_list.lock);
+	list_del(&cryp->list);
+	spin_unlock(&dev_list.lock);
+
+	clk_disable_unprepare(cryp->hclk);
+	clk_disable_unprepare(cryp->ahb);
+	reset_control_assert(cryp->rst);
+
+	return 0;
+}
+
+static const struct of_device_id starfive_dt_ids[] __maybe_unused = {
+	{ .compatible = "starfive,jh7110-crypto", .data = NULL},
+	{},
+};
+MODULE_DEVICE_TABLE(of, starfive_dt_ids);
+
+static struct platform_driver starfive_cryp_driver = {
+	.probe  = starfive_cryp_probe,
+	.remove = starfive_cryp_remove,
+	.driver = {
+		.name           = DRIVER_NAME,
+		.of_match_table = starfive_dt_ids,
+	},
+};
+
+module_platform_driver(starfive_cryp_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("StarFive Cryptographic Module");
diff --git a/drivers/crypto/starfive/jh7110-cryp.h b/drivers/crypto/starfive/jh7110-cryp.h
new file mode 100644
index 000000000000..393efd38b098
--- /dev/null
+++ b/drivers/crypto/starfive/jh7110-cryp.h
@@ -0,0 +1,63 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __STARFIVE_STR_H__
+#define __STARFIVE_STR_H__
+
+#include <linux/delay.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+
+#include <crypto/engine.h>
+
+#define STARFIVE_ALG_CR_OFFSET			0x0
+#define STARFIVE_ALG_FIFO_OFFSET		0x4
+#define STARFIVE_IE_MASK_OFFSET			0x8
+#define STARFIVE_IE_FLAG_OFFSET			0xc
+#define STARFIVE_DMA_IN_LEN_OFFSET		0x10
+#define STARFIVE_DMA_OUT_LEN_OFFSET		0x14
+
+#define STARFIVE_MSG_BUFFER_SIZE		SZ_16K
+
+union starfive_alg_cr {
+	u32 v;
+	struct {
+		u32 start			:1;
+		u32 aes_dma_en			:1;
+		u32 rsvd_0			:1;
+		u32 hash_dma_en			:1;
+		u32 alg_done			:1;
+		u32 rsvd_1			:3;
+		u32 clear			:1;
+		u32 rsvd_2			:23;
+	};
+};
+
+struct starfive_cryp_ctx {
+	struct crypto_engine_ctx		enginectx;
+	struct starfive_cryp_dev		*cryp;
+};
+
+struct starfive_cryp_dev {
+	struct list_head			list;
+	struct device				*dev;
+
+	struct clk				*hclk;
+	struct clk				*ahb;
+	struct reset_control			*rst;
+
+	void __iomem				*base;
+	phys_addr_t				phys_base;
+
+	u32					dma_maxburst;
+	struct dma_chan				*tx;
+	struct dma_chan				*rx;
+	struct dma_slave_config			cfg_in;
+	struct dma_slave_config			cfg_out;
+
+	struct crypto_engine			*engine;
+
+	union starfive_alg_cr			alg_cr;
+};
+
+struct starfive_cryp_dev *starfive_cryp_find_dev(struct starfive_cryp_ctx *ctx);
+
+#endif