diff mbox series

[4.19.y-cip,19/40] media: i2c: imx219: Selection compliance fixes

Message ID 20210309163656.20944-20-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State Accepted
Delegated to: Nobuhiro Iwamatsu
Headers show
Series Renesas RZ/G2{E,H,M,N} add VIN, CSI2 support | expand

Commit Message

Lad Prabhakar March 9, 2021, 4:36 p.m. UTC 
From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

commit 1ed36ecd1459b653cced8929bfb37dba94b64c5d upstream.

To comply with the intended usage of the V4L2 selection target when
used to retrieve a sensor image properties, adjust the rectangles
returned by the imx219 driver.

The top/left crop coordinates of the TGT_CROP rectangle were set to
(0, 0) instead of (8, 8) which is the offset from the larger physical
pixel array rectangle. This was also a mismatch with the default values
crop rectangle value, so this is corrected. Found with v4l2-compliance.

While at it, add V4L2_SEL_TGT_CROP_BOUNDS support: CROP_DEFAULT and
CROP_BOUNDS have the same size as the non-active pixels are not readable
using the selection API. Found with v4l2-compliance.

[reword commit message, use macros for pixel offsets]

Fixes: e6d4ef7d58aa7 ("media: i2c: imx219: Implement get_selection")
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Jacopo Mondi <jacopo@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 drivers/media/i2c/imx219.c | 17 +++++++++--------
 1 file changed, 9 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/i2c/imx219.c b/drivers/media/i2c/imx219.c
index c92d935a87ce..386717fb2b99 100644
--- a/drivers/media/i2c/imx219.c
+++ b/drivers/media/i2c/imx219.c
@@ -476,8 +476,8 @@  static const struct imx219_mode supported_modes[] = {
 		.width = 3280,
 		.height = 2464,
 		.crop = {
-			.left = 0,
-			.top = 0,
+			.left = IMX219_PIXEL_ARRAY_LEFT,
+			.top = IMX219_PIXEL_ARRAY_TOP,
 			.width = 3280,
 			.height = 2464
 		},
@@ -492,8 +492,8 @@  static const struct imx219_mode supported_modes[] = {
 		.width = 1920,
 		.height = 1080,
 		.crop = {
-			.left = 680,
-			.top = 692,
+			.left = 688,
+			.top = 700,
 			.width = 1920,
 			.height = 1080
 		},
@@ -508,8 +508,8 @@  static const struct imx219_mode supported_modes[] = {
 		.width = 1640,
 		.height = 1232,
 		.crop = {
-			.left = 0,
-			.top = 0,
+			.left = IMX219_PIXEL_ARRAY_LEFT,
+			.top = IMX219_PIXEL_ARRAY_TOP,
 			.width = 3280,
 			.height = 2464
 		},
@@ -524,8 +524,8 @@  static const struct imx219_mode supported_modes[] = {
 		.width = 640,
 		.height = 480,
 		.crop = {
-			.left = 1000,
-			.top = 752,
+			.left = 1008,
+			.top = 760,
 			.width = 1280,
 			.height = 960
 		},
@@ -1011,6 +1011,7 @@  static int imx219_get_selection(struct v4l2_subdev *sd,
 		return 0;
 
 	case V4L2_SEL_TGT_CROP_DEFAULT:
+	case V4L2_SEL_TGT_CROP_BOUNDS:
 		sel->r.top = IMX219_PIXEL_ARRAY_TOP;
 		sel->r.left = IMX219_PIXEL_ARRAY_LEFT;
 		sel->r.width = IMX219_PIXEL_ARRAY_WIDTH;