new file mode 100644
@@ -0,0 +1,302 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/timer/renesas,rz-mtu3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L Multi-Function Timer Pulse Unit 3 (MTU3a)
+
+maintainers:
+ - Biju Das <biju.das.jz@bp.renesas.com>
+
+description: |
+ This hardware block consists of eight 16-bit timer channels and one
+ 32- bit timer channel. It supports the following specifications:
+ - Pulse input/output: 28 lines max.
+ - Pulse input 3 lines
+ - Count clock 11 clocks for each channel (14 clocks for MTU0, 12 clocks
+ for MTU2, and 10 clocks for MTU5, four clocks for MTU1-MTU2 combination
+ (when LWA = 1))
+ - Operating frequency Up to 100 MHz
+ - Available operations [MTU0 to MTU4, MTU6, MTU7, and MTU8]
+ - Waveform output on compare match
+ - Input capture function (noise filter setting available)
+ - Counter-clearing operation
+ - Simultaneous writing to multiple timer counters (TCNT)
+ (excluding MTU8).
+ - Simultaneous clearing on compare match or input capture
+ (excluding MTU8).
+ - Simultaneous input and output to registers in synchronization with
+ counter operations (excluding MTU8).
+ - Up to 12-phase PWM output in combination with synchronous operation
+ (excluding MTU8)
+ - [MTU0 MTU3, MTU4, MTU6, MTU7, and MTU8]
+ - Buffer operation specifiable
+ - [MTU1, MTU2]
+ - Phase counting mode can be specified independently
+ - 32-bit phase counting mode can be specified for interlocked operation
+ of MTU1 and MTU2 (when TMDR3.LWA = 1)
+ - Cascade connection operation available
+ - [MTU3, MTU4, MTU6, and MTU7]
+ - Through interlocked operation of MTU3/4 and MTU6/7, the positive and
+ negative signals in six phases (12 phases in total) can be output in
+ complementary PWM and reset-synchronized PWM operation.
+ - In complementary PWM mode, values can be transferred from buffer
+ registers to temporary registers at crests and troughs of the timer-
+ counter values or when the buffer registers (TGRD registers in MTU4
+ and MTU7) are written to.
+ - Double-buffering selectable in complementary PWM mode.
+ - [MTU3 and MTU4]
+ - Through interlocking with MTU0, a mode for driving AC synchronous
+ motors (brushless DC motors) by using complementary PWM output and
+ reset-synchronized PWM output is settable and allows the selection
+ of two types of waveform output (chopping or level).
+ - [MTU5]
+ - Capable of operation as a dead-time compensation counter.
+ - [MTU0/MTU5, MTU1, MTU2, and MTU8]
+ - 32-bit phase counting mode specifiable by combining MTU1 and MTU2 and
+ through interlocked operation with MTU0/MTU5 and MTU8.
+ - Interrupt-skipping function
+ - In complementary PWM mode, interrupts on crests and troughs of counter
+ values and triggers to start conversion by the A/D converter can be
+ skipped.
+ - Interrupt sources: 43 sources.
+ - Buffer operation:
+ - Automatic transfer of register data (transfer from the buffer
+ register to the timer register).
+ - Trigger generation
+ - A/D converter start triggers can be generated
+ - A/D converter start request delaying function enables A/D converter
+ to be started with any desired timing and to be synchronized with
+ PWM output.
+ - Low power consumption function
+ - The MTU3a can be placed in the module-stop state.
+
+ There are two phase counting modes. 16-bit phase counting mode in which
+ MTU1 and MTU2 operate independently, and cascade connection 32-bit phase
+ counting mode in which MTU1 and MTU2 are cascaded.
+
+ In phase counting mode, the phase difference between two external input
+ clocks is detected and the corresponding TCNT is incremented or
+ decremented.
+ The below counters are supported
+ count0 - MTU1 16-bit phase counting
+ count1 - MTU2 16-bit phase counting
+ count2 - MTU1+ MTU2 32-bit phase counting
+
+ The module supports PWM mode{1,2}, Reset-synchronized PWM mode and
+ complementary PWM mode{1,2,3}.
+
+ In complementary PWM mode, six positive-phase and six negative-phase PWM
+ waveforms (12 phases in total) with dead time can be output by
+ combining MTU{3,4} and MTU{6,7}.
+
+ The below pwm channels are supported in pwm mode 1.
+ pwm0 - MTU0.MTIOC0A PWM mode 1
+ pwm1 - MTU0.MTIOC0C PWM mode 1
+ pwm2 - MTU1.MTIOC1A PWM mode 1
+ pwm3 - MTU2.MTIOC2A PWM mode 1
+ pwm4 - MTU3.MTIOC3A PWM mode 1
+ pwm5 - MTU3.MTIOC3C PWM mode 1
+ pwm6 - MTU4.MTIOC4A PWM mode 1
+ pwm7 - MTU4.MTIOC4C PWM mode 1
+ pwm8 - MTU6.MTIOC6A PWM mode 1
+ pwm9 - MTU6.MTIOC6C PWM mode 1
+ pwm10 - MTU7.MTIOC7A PWM mode 1
+ pwm11 - MTU7.MTIOC7C PWM mode 1
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,r9a07g044-mtu3 # RZ/G2{L,LC}
+ - renesas,r9a07g054-mtu3 # RZ/V2L
+ - const: renesas,rz-mtu3
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ items:
+ - description: MTU0.TGRA input capture/compare match
+ - description: MTU0.TGRB input capture/compare match
+ - description: MTU0.TGRC input capture/compare match
+ - description: MTU0.TGRD input capture/compare match
+ - description: MTU0.TCNT overflow
+ - description: MTU0.TGRE compare match
+ - description: MTU0.TGRF compare match
+ - description: MTU1.TGRA input capture/compare match
+ - description: MTU1.TGRB input capture/compare match
+ - description: MTU1.TCNT overflow
+ - description: MTU1.TCNT underflow
+ - description: MTU2.TGRA input capture/compare match
+ - description: MTU2.TGRB input capture/compare match
+ - description: MTU2.TCNT overflow
+ - description: MTU2.TCNT underflow
+ - description: MTU3.TGRA input capture/compare match
+ - description: MTU3.TGRB input capture/compare match
+ - description: MTU3.TGRC input capture/compare match
+ - description: MTU3.TGRD input capture/compare match
+ - description: MTU3.TCNT overflow
+ - description: MTU4.TGRA input capture/compare match
+ - description: MTU4.TGRB input capture/compare match
+ - description: MTU4.TGRC input capture/compare match
+ - description: MTU4.TGRD input capture/compare match
+ - description: MTU4.TCNT overflow/underflow
+ - description: MTU5.TGRU input capture/compare match
+ - description: MTU5.TGRV input capture/compare match
+ - description: MTU5.TGRW input capture/compare match
+ - description: MTU6.TGRA input capture/compare match
+ - description: MTU6.TGRB input capture/compare match
+ - description: MTU6.TGRC input capture/compare match
+ - description: MTU6.TGRD input capture/compare match
+ - description: MTU6.TCNT overflow
+ - description: MTU7.TGRA input capture/compare match
+ - description: MTU7.TGRB input capture/compare match
+ - description: MTU7.TGRC input capture/compare match
+ - description: MTU7.TGRD input capture/compare match
+ - description: MTU7.TCNT overflow/underflow
+ - description: MTU8.TGRA input capture/compare match
+ - description: MTU8.TGRB input capture/compare match
+ - description: MTU8.TGRC input capture/compare match
+ - description: MTU8.TGRD input capture/compare match
+ - description: MTU8.TCNT overflow
+ - description: MTU8.TCNT underflow
+
+ interrupt-names:
+ items:
+ - const: tgia0
+ - const: tgib0
+ - const: tgic0
+ - const: tgid0
+ - const: tgiv0
+ - const: tgie0
+ - const: tgif0
+ - const: tgia1
+ - const: tgib1
+ - const: tgiv1
+ - const: tgiu1
+ - const: tgia2
+ - const: tgib2
+ - const: tgiv2
+ - const: tgiu2
+ - const: tgia3
+ - const: tgib3
+ - const: tgic3
+ - const: tgid3
+ - const: tgiv3
+ - const: tgia4
+ - const: tgib4
+ - const: tgic4
+ - const: tgid4
+ - const: tgiv4
+ - const: tgiu5
+ - const: tgiv5
+ - const: tgiw5
+ - const: tgia6
+ - const: tgib6
+ - const: tgic6
+ - const: tgid6
+ - const: tgiv6
+ - const: tgia7
+ - const: tgib7
+ - const: tgic7
+ - const: tgid7
+ - const: tgiv7
+ - const: tgia8
+ - const: tgib8
+ - const: tgic8
+ - const: tgid8
+ - const: tgiv8
+ - const: tgiu8
+
+ clocks:
+ maxItems: 1
+
+ power-domains:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ "#pwm-cells":
+ const: 2
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - interrupt-names
+ - clocks
+ - power-domains
+ - resets
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/r9a07g044-cpg.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ mtu3: timer@10001200 {
+ compatible = "renesas,r9a07g044-mtu3", "renesas,rz-mtu3";
+ reg = <0x10001200 0xb00>;
+ interrupts = <GIC_SPI 170 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 171 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 172 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 173 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 174 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 175 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 181 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 182 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 185 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 186 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 187 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 188 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 189 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 190 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 191 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 192 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 194 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 196 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 198 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 199 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 200 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 201 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 202 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 204 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 207 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 208 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 209 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "tgia0", "tgib0", "tgic0", "tgid0", "tgiv0", "tgie0",
+ "tgif0",
+ "tgia1", "tgib1", "tgiv1", "tgiu1",
+ "tgia2", "tgib2", "tgiv2", "tgiu2",
+ "tgia3", "tgib3", "tgic3", "tgid3", "tgiv3",
+ "tgia4", "tgib4", "tgic4", "tgid4", "tgiv4",
+ "tgiu5", "tgiv5", "tgiw5",
+ "tgia6", "tgib6", "tgic6", "tgid6", "tgiv6",
+ "tgia7", "tgib7", "tgic7", "tgid7", "tgiv7",
+ "tgia8", "tgib8", "tgic8", "tgid8", "tgiv8", "tgiu8";
+ clocks = <&cpg CPG_MOD R9A07G044_MTU_X_MCK_MTU3>;
+ power-domains = <&cpg>;
+ resets = <&cpg R9A07G044_MTU_X_PRESET_MTU3>;
+ #pwm-cells = <2>;
+ };