Show patches with: Submitter = Andrea della Porta       |    State = Action Required       |   100 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
[2/2] of: address: Preserve the flags portion on 1:1 dma-ranges mapping Preserve the flags portion on 1:1 dma-ranges mapping - - 1 --- 2024-11-08 Andrea della Porta New
[1/2] of/unittest: Add empty dma-ranges address translation tests Preserve the flags portion on 1:1 dma-ranges mapping - - - --- 2024-11-08 Andrea della Porta New
PCI: of_property: Assign PCI instead of CPU bus address to dynamic PCI nodes PCI: of_property: Assign PCI instead of CPU bus address to dynamic PCI nodes 1 - 1 --- 2024-11-08 Andrea della Porta New
[v3,12/12] arm64: defconfig: Enable RP1 misc/clock/gpio drivers Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-28 Andrea della Porta New
[v3,11/12] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5 Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-28 Andrea della Porta New
[v3,10/12] misc: rp1: RaspberryPi RP1 misc driver Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-28 Andrea della Porta New
[v3,09/12] arm64: dts: rp1: Add support for RaspberryPi's RP1 device Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-28 Andrea della Porta New
[v3,08/12] pinctrl: rp1: Implement RaspberryPi RP1 gpio support Add support for RaspberryPi RP1 PCI device using a DT overlay - 1 - --- 2024-10-28 Andrea della Porta New
[v3,07/12] clk: rp1: Add support for clocks provided by RP1 Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-28 Andrea della Porta New
[v3,06/12] of: address: Preserve the flags portion on 1:1 dma-ranges mapping Add support for RaspberryPi RP1 PCI device using a DT overlay - - 1 --- 2024-10-28 Andrea della Porta New
[v3,05/12] PCI: of_property: Assign PCI instead of CPU bus address to dynamic bridge nodes Add support for RaspberryPi RP1 PCI device using a DT overlay 1 - 1 --- 2024-10-28 Andrea della Porta New
[v3,04/12] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1 Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-28 Andrea della Porta New
[v3,03/12] dt-bindings: pci: Add common schema for devices accessible through PCI BARs Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-28 Andrea della Porta New
[v3,02/12] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-28 Andrea della Porta New
[v3,01/12] dt-bindings: clock: Add RaspberryPi RP1 clock bindings Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-28 Andrea della Porta New
[v2,14/14] arm64: defconfig: Enable RP1 misc/clock/gpio drivers Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-07 Andrea della Porta New
[v2,13/14] arm64: dts: Add DTS overlay for RP1 gpio line names Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-07 Andrea della Porta New
[v2,12/14] arm64: dts: bcm2712: Add external clock for RP1 chipset on Rpi5 Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-07 Andrea della Porta New
[v2,11/14] misc: rp1: RaspberryPi RP1 misc driver Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-07 Andrea della Porta New
[v2,10/14] arm64: dts: rp1: Add support for RaspberryPi's RP1 device Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-07 Andrea della Porta New
[v2,09/14] pinctrl: rp1: Implement RaspberryPi RP1 gpio support Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-07 Andrea della Porta New
[v2,08/14] clk: rp1: Add support for clocks provided by RP1 Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-07 Andrea della Porta New
[v2,07/14] gpiolib: Export symbol gpiochip_set_names() Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-07 Andrea della Porta New
[v2,06/14] of: address: Preserve the flags portion on 1:1 dma-ranges mapping Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-07 Andrea della Porta New
[v2,05/14] PCI: of_property: Sanitize 32 bit PCI address parsed from DT Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-07 Andrea della Porta New
[v2,04/14] dt-bindings: misc: Add device specific bindings for RaspberryPi RP1 Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-07 Andrea della Porta New
[v2,03/14] dt-bindings: pci: Add common schema for devices accessible through PCI BARs Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-07 Andrea della Porta New
[v2,02/14] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-07 Andrea della Porta New
[v2,01/14] dt-bindings: clock: Add RaspberryPi RP1 clock bindings Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-10-07 Andrea della Porta New
[11/11] arm64: dts: rp1: Add support for MACB contained in RP1 Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-08-20 Andrea della Porta New
[10/11] net: macb: Add support for RP1's MACB variant Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-08-20 Andrea della Porta New
[09/11] arm64: defconfig: Enable RP1 misc/clock/gpio drivers as built-in Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-08-20 Andrea della Porta New
[08/11] misc: rp1: RaspberryPi RP1 misc driver Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-08-20 Andrea della Porta New
[07/11] pinctrl: rp1: Implement RaspberryPi RP1 gpio support Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-08-20 Andrea della Porta New
[06/11] clk: rp1: Add support for clocks provided by RP1 Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-08-20 Andrea della Porta New
[05/11] vmlinux.lds.h: Preserve DTB sections from being discarded after init Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-08-20 Andrea della Porta New
[04/11] of: address: Preserve the flags portion on 1:1 dma-ranges mapping Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-08-20 Andrea della Porta New
[03/11] PCI: of_property: Sanitize 32 bit PCI address parsed from DT Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-08-20 Andrea della Porta New
[02/11] dt-bindings: pinctrl: Add RaspberryPi RP1 gpio/pinctrl/pinmux bindings Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-08-20 Andrea della Porta New
[01/11] dt-bindings: clock: Add RaspberryPi RP1 clock bindings Add support for RaspberryPi RP1 PCI device using a DT overlay - - - --- 2024-08-20 Andrea della Porta New
[v5,4/4] arm64: dts: broadcom: Add minimal support for Raspberry Pi 5 Add minimal boot support for Raspberry Pi 5 - 1 - --- 2024-05-30 Andrea della Porta New
[v5,3/4] mmc: sdhci-brcmstb: Add BCM2712 support Add minimal boot support for Raspberry Pi 5 1 1 - --- 2024-05-30 Andrea della Porta New
[v5,2/4] dt-bindings: mmc: Add support for BCM2712 SD host controller Add minimal boot support for Raspberry Pi 5 1 1 - --- 2024-05-30 Andrea della Porta New
[v5,1/4] dt-bindings: arm: bcm: Add BCM2712 SoC support Add minimal boot support for Raspberry Pi 5 2 1 - --- 2024-05-30 Andrea della Porta New
[v4,4/4] arm64: dts: broadcom: Add support for BCM2712 Add minimal boot support for Raspberry Pi 5 - - - --- 2024-05-28 Andrea della Porta New
[v4,3/4] mmc: sdhci-brcmstb: Add BCM2712 support Add minimal boot support for Raspberry Pi 5 1 1 - --- 2024-05-28 Andrea della Porta New
[v4,2/4] dt-bindings: mmc: Add support for BCM2712 SD host controller Add minimal boot support for Raspberry Pi 5 1 1 - --- 2024-05-28 Andrea della Porta New
[v4,1/4] dt-bindings: arm: bcm: Add BCM2712 SoC support Add minimal boot support for Raspberry Pi 5 2 1 - --- 2024-05-28 Andrea della Porta New
[v3,4/4] arm64: dts: broadcom: Add support for BCM2712 Add minimal boot support for Raspberry Pi 5 - - - --- 2024-05-21 Andrea della Porta New
[v3,3/4] mmc: sdhci-brcmstb: Add BCM2712 support Add minimal boot support for Raspberry Pi 5 - - - --- 2024-05-21 Andrea della Porta New
[v3,2/4] dt-bindings: mmc: Add support for BCM2712 SD host controller Add minimal boot support for Raspberry Pi 5 - - - --- 2024-05-21 Andrea della Porta New
[v3,1/4] dt-bindings: arm: bcm: Add BCM2712 SoC support Add minimal boot support for Raspberry Pi 5 2 1 - --- 2024-05-21 Andrea della Porta New
[v2,4/4] arm64: dts: broadcom: Add support for BCM2712 Add minimal boot support for Raspberry Pi 5 - - - --- 2024-05-10 Andrea della Porta New
[v2,3/4] mmc: sdhci-brcmstb: Add BCM2712 support Add minimal boot support for Raspberry Pi 5 - - - --- 2024-05-10 Andrea della Porta New
[v2,2/4] dt-bindings: mmc: Add support for BCM2712 SD host controller Add minimal boot support for Raspberry Pi 5 - - - --- 2024-05-10 Andrea della Porta New
[v2,1/4] dt-bindings: arm: bcm: Add BCM2712 SoC support Add minimal boot support for Raspberry Pi 5 2 1 - --- 2024-05-10 Andrea della Porta New
[v3] arm64: Add the arm64.no32bit_el0 command line option [v3] arm64: Add the arm64.no32bit_el0 command line option - - - --- 2024-04-29 Andrea della Porta New
[6/6] mmc: sdhci-brcmstb: Add BCM2712 SD Express support Add support for BCM2712 SD card controller - - - --- 2024-04-13 Andrea della Porta New
[5/6] mmc: sdhci-brcmstb: Add BCM2712 support Add support for BCM2712 SD card controller - - - --- 2024-04-13 Andrea della Porta New
[4/6] pinctrl: bcm: Add pinconf/pinmux controller driver for BCM2712 Add support for BCM2712 SD card controller - - - --- 2024-04-13 Andrea della Porta New
[3/6] arm64: dts: broadcom: Add support for BCM2712 Add support for BCM2712 SD card controller - - - --- 2024-04-13 Andrea della Porta New
[2/6] dt-bindings: mmc: Add support for BCM2712 SD host controller Add support for BCM2712 SD card controller - - - --- 2024-04-13 Andrea della Porta New
[1/6] dt-bindings: pinctrl: Add support for BCM2712 pin controller Add support for BCM2712 SD card controller - - - --- 2024-04-13 Andrea della Porta New
[v2,15/15] ARM: dts: bcm2711: add bcm2711-dma node dmaengine: bcm2835: add BCM2711 40-bit DMA support - - - --- 2024-03-13 Andrea della Porta New
[v2,14/15] dmaengine: bcm2835: Add BCM2711 40-bit DMA support dmaengine: bcm2835: add BCM2711 40-bit DMA support - - - --- 2024-03-13 Andrea della Porta New
[v2,13/15] dt-bindings: dma: Added bcm2711-dma dmaengine: bcm2835: add BCM2711 40-bit DMA support - - - --- 2024-03-13 Andrea della Porta New
[v2,12/15] dmaengine: bcm2835: introduce multi platform support dmaengine: bcm2835: add BCM2711 40-bit DMA support - - - --- 2024-03-13 Andrea della Porta New
[v2,11/15] dmaengine: bcm2835: pass dma_chan to generic functions dmaengine: bcm2835: add BCM2711 40-bit DMA support - - - --- 2024-03-13 Andrea della Porta New
[v2,10/15] dmaengine: bcm2385: drop info parameters dmaengine: bcm2835: add BCM2711 40-bit DMA support - - - --- 2024-03-13 Andrea della Porta New
[v2,09/15] dmaengine: bcm2835: make address increment platform independent dmaengine: bcm2835: add BCM2711 40-bit DMA support - - - --- 2024-03-13 Andrea della Porta New
[v2,08/15] dmaengine: bcm2835: move CB final extra info generation into function dmaengine: bcm2835: add BCM2711 40-bit DMA support - - - --- 2024-03-13 Andrea della Porta New
[v2,07/15] dmaengine: bcm2835: move CB info generation into separate function dmaengine: bcm2835: add BCM2711 40-bit DMA support - - - --- 2024-03-13 Andrea della Porta New
[v2,06/15] dmaengine: bcm2835: Support common dma-channel-mask dmaengine: bcm2835: add BCM2711 40-bit DMA support - - - --- 2024-03-13 Andrea della Porta New
[v2,05/15] dmaengine: bcm2835: Fixes for dma_abort dmaengine: bcm2835: add BCM2711 40-bit DMA support - - - --- 2024-03-13 Andrea della Porta New
[v2,04/15] dmaengine: bcm2835: Support dma flags for multi-beat burst dmaengine: bcm2835: add BCM2711 40-bit DMA support - - - --- 2024-03-13 Andrea della Porta New
[v2,03/15] dmaengine: bcm2835: Add NO_WAIT_RESP, DMA_WIDE_SOURCE and DMA_WIDE_DEST flag dmaengine: bcm2835: add BCM2711 40-bit DMA support - - - --- 2024-03-13 Andrea della Porta New
[v2,02/15] dmaengine: bcm2835: Add support for per-channel flags dmaengine: bcm2835: add BCM2711 40-bit DMA support - - - --- 2024-03-13 Andrea della Porta New
[v2,01/15] dmaengine: bcm2835: Fix several spellos dmaengine: bcm2835: add BCM2711 40-bit DMA support - - - --- 2024-03-13 Andrea della Porta New
[v2] arm64: Add the arm64.no32bit_el0 command line option [v2] arm64: Add the arm64.no32bit_el0 command line option - - - --- 2024-02-07 Andrea della Porta New
arm64: Add the arm64.no32bit_el0 command line option arm64: Add the arm64.no32bit_el0 command line option - - - --- 2024-02-06 Andrea della Porta New
[12/12] bcm2835-dma: Fixes for dma_abort Add support for BCM2712 DMA engine - - - --- 2024-02-04 Andrea della Porta New
[11/12] dmaengine: bcm2835: Rename to_bcm2711_cbaddr to to_40bit_cbaddr Add support for BCM2712 DMA engine - - - --- 2024-02-04 Andrea della Porta New
[10/12] dmaengine: bcm2835: Support DMA-Lite channels Add support for BCM2712 DMA engine - - - --- 2024-02-04 Andrea della Porta New
[09/12] dmaengine: bcm2835: Add BCM2712 support Add support for BCM2712 DMA engine - - - --- 2024-02-04 Andrea della Porta New
[08/12] bcm2835-dma: Need to keep PROT bits set in CS on 40bit controller Add support for BCM2712 DMA engine - - - --- 2024-02-04 Andrea della Porta New
[07/12] bcm2835-dma: Support dma flags for multi-beat burst Add support for BCM2712 DMA engine - - - --- 2024-02-04 Andrea della Porta New
[06/12] dmaengine: bcm2835: Use to_bcm2711_cbaddr where relevant Add support for BCM2712 DMA engine - - - --- 2024-02-04 Andrea della Porta New
[05/12] bcm2835-dma: Derive slave DMA addresses correctly Add support for BCM2712 DMA engine - - - --- 2024-02-04 Andrea della Porta New
[04/12] bcm2835-dma: Advertise the full DMA range Add support for BCM2712 DMA engine - - - --- 2024-02-04 Andrea della Porta New
[03/12] bcm2835-dma: Add NO_WAIT_RESP, DMA_WIDE_SOURCE and DMA_WIDE_DEST flag Add support for BCM2712 DMA engine - - - --- 2024-02-04 Andrea della Porta New
[02/12] bcm2835-dma: Add proper 40-bit DMA support Add support for BCM2712 DMA engine - - - --- 2024-02-04 Andrea della Porta New
[01/12] bcm2835-dma: Add support for per-channel flags Add support for BCM2712 DMA engine - - - --- 2024-02-04 Andrea della Porta New
[v2,4/4] arm64: Make Aarch32 support boot time configurable arm64: Make Aarch32 compatibility enablement optional at boot - - - --- 2023-10-23 Andrea della Porta New
[v2,3/4] arm64/entry-common: Make Aarch32 exceptions' availability depend on aarch32_enabled() arm64: Make Aarch32 compatibility enablement optional at boot - - - --- 2023-10-23 Andrea della Porta New
[v2,2/4] arm64/process: Make loading of 32bit processes depend on aarch32_enabled() arm64: Make Aarch32 compatibility enablement optional at boot - - - --- 2023-10-23 Andrea della Porta New
[v2,1/4] arm64: Introduce aarch32_enabled() arm64: Make Aarch32 compatibility enablement optional at boot - - - --- 2023-10-23 Andrea della Porta New
[4/4] arm64: Make Aarch32 emulation boot time configurable arm64: Make Aarch32 compatibility enablement optional at boot - - - --- 2023-10-18 Andrea della Porta New
[3/4] arm64/entry-common: Make Aarch32 syscalls' availability depend on aarch32_enabled() arm64: Make Aarch32 compatibility enablement optional at boot - - - --- 2023-10-18 Andrea della Porta New
[2/4] arm64/process: Make loading of 32bit processes depend on aarch32_enabled() arm64: Make Aarch32 compatibility enablement optional at boot - - - --- 2023-10-18 Andrea della Porta New
[1/4] arm64: Introduce aarch32_enabled() arm64: Make Aarch32 compatibility enablement optional at boot - - - --- 2023-10-18 Andrea della Porta New