Show patches with: none      |   81072 patches
« 1 2 ... 523 524 525810 811 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v2,1/2] phy/qualcomm: add hbr3_hbr2 voltage and premphasis swing table [v2,1/2] phy/qualcomm: add hbr3_hbr2 voltage and premphasis swing table - 1 1 --- 2021-02-18 Kuogee Hsieh Not Applicable
[v4] drm/msm/disp/dpu1: turn off vblank irqs aggressively in dpu driver [v4] drm/msm/disp/dpu1: turn off vblank irqs aggressively in dpu driver - - - --- 2021-02-18 Kalyan Thota Accepted
[3/3] fastrpc: remove redundant fastrpc_map_create() call fastrpc: fix dmabuf arguments - - - --- 2021-02-18 Jonathan Marek Not Applicable
[2/3] fastrpc: move fl->maps list removal into fastrpc_free_map fastrpc: fix dmabuf arguments - - - --- 2021-02-18 Jonathan Marek Not Applicable
[1/3] fastrpc: always use fl->lock and remove fl->mutex fastrpc: fix dmabuf arguments - - - --- 2021-02-18 Jonathan Marek Not Applicable
[1/2] phy/qualcomm: add hbr3_hbr2 voltage and premphasis swing table [1/2] phy/qualcomm: add hbr3_hbr2 voltage and premphasis swing table - - - --- 2021-02-17 Kuogee Hsieh Not Applicable
[2/2] drm/msm/dp: Drop limit link rate at HBR2 [1/2] phy/qualcomm: add hbr3_hbr2 voltage and premphasis swing table - 1 1 --- 2021-02-17 Kuogee Hsieh Not Applicable
arm64: dts: qcom: db410c: Update firmware-name for wcnss and mpss arm64: dts: qcom: db410c: Update firmware-name for wcnss and mpss - 1 1 --- 2021-02-17 Anibal Limon Superseded
remoteproc: qcom: wcnss: Allow specifying firmware-name remoteproc: qcom: wcnss: Allow specifying firmware-name - - 1 --- 2021-02-17 Anibal Limon Not Applicable
[v2,3/3] media: qcom: camss: Fix overflows in clock rate calculations media: qcom: camss: V4L2_CID_PIXEL_RATE/LINK_FREQ fixes 1 1 - --- 2021-02-17 Andrey Konovalov Superseded
[v2,2/3] media: camss: use v4l2_get_link_freq() to calculate the relevant clocks media: qcom: camss: V4L2_CID_PIXEL_RATE/LINK_FREQ fixes 1 1 - --- 2021-02-17 Andrey Konovalov Superseded
[v2,1/3] v4l: common: v4l2_get_link_freq: add printing a warning media: qcom: camss: V4L2_CID_PIXEL_RATE/LINK_FREQ fixes - 1 - --- 2021-02-17 Andrey Konovalov Superseded
[v10,8/8] dt-bindings: thermal: tsens: Document ipq8064 bindings Add support for ipq8064 tsens - 1 - --- 2021-02-17 Christian Marangi Superseded
[v10,7/8] drivers: thermal: tsens: Add support for ipq8064-tsens Add support for ipq8064 tsens - 1 - --- 2021-02-17 Christian Marangi Superseded
[v10,6/8] drivers: thermal: tsens: Use get_temp_common for msm8960 Add support for ipq8064 tsens 1 - - --- 2021-02-17 Christian Marangi Superseded
[v10,5/8] drivers: thermal: tsens: Fix bug in sensor enable for msm8960 Add support for ipq8064 tsens - - - --- 2021-02-17 Christian Marangi Superseded
[v10,4/8] drivers: thermal: tsens: Use init_common for msm8960 Add support for ipq8064 tsens - 1 - --- 2021-02-17 Christian Marangi Superseded
[v10,3/8] drivers: thermal: tsens: Convert msm8960 to reg_field Add support for ipq8064 tsens 1 - - --- 2021-02-17 Christian Marangi Superseded
[v10,2/8] drivers: thermal: tsens: Don't hardcode sensor slope Add support for ipq8064 tsens - 1 - --- 2021-02-17 Christian Marangi Superseded
[v10,1/8] drivers: thermal: tsens: Add VER_0 tsens version Add support for ipq8064 tsens - - - --- 2021-02-17 Christian Marangi Superseded
arm64: dts: qcom: sc7180:: modified qfprom CORR size as per RAW size arm64: dts: qcom: sc7180:: modified qfprom CORR size as per RAW size - 1 - --- 2021-02-17 Ravi Kumar Bokka Accepted
drm/msm/dp: add support of HBR3 link rate drm/msm/dp: add support of HBR3 link rate - - - --- 2021-02-17 Kuogee Hsieh Not Applicable
[v2] bus: mhi: core: Check state before processing power_down [v2] bus: mhi: core: Check state before processing power_down - - - --- 2021-02-17 Jeffrey Hugo Superseded
[v3] bus: mhi: core: Return EAGAIN if MHI ring is full [v3] bus: mhi: core: Return EAGAIN if MHI ring is full - 2 - --- 2021-02-17 Jeffrey Hugo Superseded
[v2] bus: mhi: core: Sanity check values from remote device before use [v2] bus: mhi: core: Sanity check values from remote device before use - - - --- 2021-02-17 Jeffrey Hugo Superseded
mhi_bus: core: Sanity check values from remote device before use mhi_bus: core: Sanity check values from remote device before use - - - --- 2021-02-17 Jeffrey Hugo Not Applicable
[2/2] arm64: dts: qcom: sm8250: Add venus DT node dts: qcom: sm8250: Enable venus related DT nodes - - - --- 2021-02-17 Bryan O'Donoghue Superseded
[1/2] arm64: dts: qcom: sm8250: Add videocc DT node dts: qcom: sm8250: Enable venus related DT nodes - - - --- 2021-02-17 Bryan O'Donoghue Superseded
[v4,16/16] rpmsg: char: return an error if device already open introduce a generic IOCTL interface for RPMsg channels management - - - --- 2021-02-17 Arnaud Pouliquen Superseded
[v4,15/16] rpmsg: char: no dynamic endpoint management for the default one introduce a generic IOCTL interface for RPMsg channels management - - - --- 2021-02-17 Arnaud Pouliquen Superseded
[v4,14/16] rpmsg: char: introduce a RPMsg driver for the RPMsg char device introduce a generic IOCTL interface for RPMsg channels management - - - --- 2021-02-17 Arnaud Pouliquen Superseded
[v4,13/16] rpmsg: char: introduce __rpmsg_chrdev_create_eptdev function introduce a generic IOCTL interface for RPMsg channels management - - - --- 2021-02-17 Arnaud Pouliquen Superseded
[v4,12/16] rpmsg: ctrl: introduce RPMSG_CREATE_DEV_IOCTL introduce a generic IOCTL interface for RPMsg channels management - - - --- 2021-02-17 Arnaud Pouliquen Superseded
[v4,11/16] rpmsg: virtio: register the rpmsg_ctrl device introduce a generic IOCTL interface for RPMsg channels management - - - --- 2021-02-17 Arnaud Pouliquen Superseded
[v4,10/16] rpmsg: char: use sendto to specify the message destination address introduce a generic IOCTL interface for RPMsg channels management - - - --- 2021-02-17 Arnaud Pouliquen Superseded
[v4,09/16] rpmsg: smd: add sendto and trysendto ops introduce a generic IOCTL interface for RPMsg channels management - - - --- 2021-02-17 Arnaud Pouliquen Superseded
[v4,08/16] rpmsg: glink: add sendto and trysendto ops introduce a generic IOCTL interface for RPMsg channels management - - - --- 2021-02-17 Arnaud Pouliquen Superseded
[v4,07/16] rpmsg: update rpmsg_chrdev_register_device function introduce a generic IOCTL interface for RPMsg channels management - - - --- 2021-02-17 Arnaud Pouliquen Superseded
[v4,06/16] rpmsg: move the rpmsg control device from rpmsg_char to rpmsg_ctrl introduce a generic IOCTL interface for RPMsg channels management - - - --- 2021-02-17 Arnaud Pouliquen Superseded
[v4,05/16] rpmsg: char: dissociate the control device from the rpmsg class introduce a generic IOCTL interface for RPMsg channels management - - - --- 2021-02-17 Arnaud Pouliquen Superseded
[v4,04/16] rpmsg: char: export eptdev create an destroy functions introduce a generic IOCTL interface for RPMsg channels management - - - --- 2021-02-17 Arnaud Pouliquen Superseded
[v4,03/16] rpmsg: add short description of the IOCTL defined in UAPI. introduce a generic IOCTL interface for RPMsg channels management - - - --- 2021-02-17 Arnaud Pouliquen Superseded
[v4,02/16] rpmsg: move RPMSG_ADDR_ANY in user API introduce a generic IOCTL interface for RPMsg channels management - - - --- 2021-02-17 Arnaud Pouliquen Superseded
[v4,01/16] rpmsg: char: rename rpmsg_char_init to rpmsg_chrdev_init introduce a generic IOCTL interface for RPMsg channels management - - - --- 2021-02-17 Arnaud Pouliquen Superseded
[v5,22/22] arm64: dts: sdm845-db845c: Enable ov8856 sensor and connect to ISP Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Superseded
[v5,21/22] arm64: dts: sdm845-db845c: Configure regulators for camss node Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Superseded
[v5,20/22] arm64: dts: sdm845: Add CAMSS ISP node Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Superseded
[v5,19/22] media: dt-bindings: media: Remove qcom,camss documentation Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Not Applicable
[v5,18/22] MAINTAINERS: Change CAMSS documentation to use dtschema bindings Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Not Applicable
[v5,17/22] dt-bindings: media: camss: Add qcom,sdm845-camss binding Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Not Applicable
[v5,16/22] dt-bindings: media: camss: Add qcom,sdm660-camss binding Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Not Applicable
[v5,15/22] dt-bindings: media: camss: Add qcom,msm8996-camss binding Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Not Applicable
[v5,14/22] dt-bindings: media: camss: Add qcom,msm8916-camss binding Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Not Applicable
[v5,13/22] media: camss: Enable SDM845 Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Not Applicable
[v5,12/22] media: camss: Remove per VFE power domain toggling Add support for the SDM845 Camera Subsystem - - - --- 2021-02-17 Robert Foss Not Applicable
[v5,11/22] media: camss: Add support for CSIPHY hardware version Titan 170 Add support for the SDM845 Camera Subsystem - - - --- 2021-02-17 Robert Foss Not Applicable
[v5,10/22] media: camss: Add support for CSID hardware version Titan 170 Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Not Applicable
[v5,09/22] media: camss: Refactor CSID HW version support Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Not Applicable
[v5,08/22] media: camss: Add missing format identifiers Add support for the SDM845 Camera Subsystem - - - --- 2021-02-17 Robert Foss Not Applicable
[v5,07/22] media: camss: Add support for VFE hardware version Titan 170 Add support for the SDM845 Camera Subsystem - - - --- 2021-02-17 Robert Foss Not Applicable
[v5,05/22] media: camss: Make ISPIF subdevice optional Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Not Applicable
[v5,04/22] media: camss: Add CAMSS_845 camss version Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Not Applicable
[v5,03/22] media: camss: Replace trace_printk() with dev_dbg() Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Not Applicable
[v5,02/22] media: camss: Fix vfe_isr comment typo Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Not Applicable
[v5,01/22] media: camss: Fix vfe_isr_comp_done() documentation Add support for the SDM845 Camera Subsystem - 1 - --- 2021-02-17 Robert Foss Not Applicable
[V0,6/6] MAINTAINERS:Added the entry for DCC(Data Capture and Compare) driver support Add driver support for Data Capture and Compare Engine(DCC) for SM8150 - - - --- 2021-02-17 Souradeep Chowdhury Superseded
[V0,5/6] DCC:Added the sysfs entries for DCC(Data Capture and Compare) driver Add driver support for Data Capture and Compare Engine(DCC) for SM8150 - - - --- 2021-02-17 Souradeep Chowdhury Superseded
[V0,4/6] soc: qcom: dcc:Add the sysfs variables to the Data Capture and Compare driver(DCC) Add driver support for Data Capture and Compare Engine(DCC) for SM8150 - - - --- 2021-02-17 Souradeep Chowdhury Superseded
[V0,3/6] soc: qcom: dcc:Add driver support for Data Capture and Compare unit(DCC) Add driver support for Data Capture and Compare Engine(DCC) for SM8150 - - - --- 2021-02-17 Souradeep Chowdhury Superseded
[V0,2/6] arm64: dts: qcom: sm8150: Add Data Capture and Compare(DCC) support node Add driver support for Data Capture and Compare Engine(DCC) for SM8150 - - - --- 2021-02-17 Souradeep Chowdhury Superseded
[V0,1/6] dt-bindings: Added the yaml bindings for DCC Add driver support for Data Capture and Compare Engine(DCC) for SM8150 - - - --- 2021-02-17 Souradeep Chowdhury Superseded
cpufreq: exclude boost frequencies from valid count if not enabled cpufreq: exclude boost frequencies from valid count if not enabled - - - --- 2021-02-17 Thara Gopinath Not Applicable
mhi_bus: core: Check state before processing power_down mhi_bus: core: Check state before processing power_down - - - --- 2021-02-16 Jeffrey Hugo Not Applicable
[v2] mhi_bus: core: Return EAGAIN if MHI ring is full [v2] mhi_bus: core: Return EAGAIN if MHI ring is full - - - --- 2021-02-16 Jeffrey Hugo Accepted
mhi_bus: core: Wait for ready state after reset mhi_bus: core: Wait for ready state after reset - - - --- 2021-02-16 Jeffrey Hugo Not Applicable
opp: fix dev_pm_opp_set_rate for different frequency at the same opp level opp: fix dev_pm_opp_set_rate for different frequency at the same opp level - - - --- 2021-02-16 Jonathan Marek Not Applicable
drm/msm/a6xx: fix for kernels without CONFIG_NVMEM drm/msm/a6xx: fix for kernels without CONFIG_NVMEM - - - --- 2021-02-16 Jonathan Marek Not Applicable
mhi_bus: core: Return EBUSY if MHI ring is full mhi_bus: core: Return EBUSY if MHI ring is full - - - --- 2021-02-16 Jeffrey Hugo Not Applicable
[v3,2/2] mhi: pci_generic: Introduce quectel EM1XXGR-L support [v3,1/2] mhi: pci_generic: Parametrable element count for events - 1 - --- 2021-02-16 Loic Poulain Superseded
[v3,1/2] mhi: pci_generic: Parametrable element count for events [v3,1/2] mhi: pci_generic: Parametrable element count for events - 1 - --- 2021-02-16 Loic Poulain Superseded
[next] thermal: qcom: Fix comparison with uninitialized variable channels_available [next] thermal: qcom: Fix comparison with uninitialized variable channels_available - - - --- 2021-02-16 Colin King Accepted
bus: qcom-ebi2: add missing of_node_put bus: qcom-ebi2: add missing of_node_put - - - --- 2021-02-16 Junlin Yang Accepted
[7/6] arm64: dts: qcom: sm8350: Add cpufreq node Untitled series #433949 - - - --- 2021-02-16 Vinod Koul Accepted
dt-bindings: cpufreq: cpufreq-qcom-hw: Document SM8350 CPUfreq compatible dt-bindings: cpufreq: cpufreq-qcom-hw: Document SM8350 CPUfreq compatible - - - --- 2021-02-16 Vinod Koul Not Applicable
[3/3] arm64: dts: qcom: sm8250: Fix timer interrupt to specify EL2 physical timer arm64: dts: qcom: Fix PMU and timer interrupt properties - - - --- 2021-02-16 Sai Prakash Ranjan Accepted
[2/3] arm64: dts: qcom: sm8350: Fix level triggered PMU interrupt polarity arm64: dts: qcom: Fix PMU and timer interrupt properties - - - --- 2021-02-16 Sai Prakash Ranjan Accepted
[1/3] arm64: dts: qcom: sm8250: Fix level triggered PMU interrupt polarity arm64: dts: qcom: Fix PMU and timer interrupt properties - - - --- 2021-02-16 Sai Prakash Ranjan Accepted
drm/msm/dsi: support CPHY mode for 7nm pll/phy drm/msm/dsi: support CPHY mode for 7nm pll/phy - 1 - --- 2021-02-15 Jonathan Marek Superseded
[v3,2/2] arm64: dts: qcom: sm8250: fix display nodes arm64: dts: qcom: sm8250: fix display nodes - 1 - --- 2021-02-15 Jonathan Marek Superseded
[v3,1/2] drm/msm: add compatibles for sm8150/sm8250 display arm64: dts: qcom: sm8250: fix display nodes 1 - - --- 2021-02-15 Jonathan Marek Not Applicable
[v2,2/2] arm64: dts: qcom: sm8250: fix display nodes arm64: dts: qcom: sm8250: fix display nodes - - - --- 2021-02-15 Jonathan Marek Superseded
[v2,1/2] drm/msm: add compatibles for sm8150/sm8250 display arm64: dts: qcom: sm8250: fix display nodes - - - --- 2021-02-15 Jonathan Marek Superseded
[v2,2/2] dt-bindings: media: venus: Add sm8250 dt schema Add dt bindings for sm8250 venus - 1 - --- 2021-02-15 Bryan O'Donoghue Not Applicable
[v2,1/2] dt-bindings: clock: Add missing SM8250 videoc clock indices Add dt bindings for sm8250 venus - - - --- 2021-02-15 Bryan O'Donoghue Not Applicable
mhi: Rename debugfs directory name mhi: Rename debugfs directory name - 2 1 --- 2021-02-15 Loic Poulain Accepted
[2/2] media: qcom: camss: Fix overflows in clock rate calculations media: qcom: camss: V4L2_CID_PIXEL_RATE/LINK_FREQ fixes 1 - - --- 2021-02-14 Andrey Konovalov Superseded
[1/2] media: camss: use v4l2_get_link_freq() to calculate the relevant clocks media: qcom: camss: V4L2_CID_PIXEL_RATE/LINK_FREQ fixes 1 1 - --- 2021-02-14 Andrey Konovalov Superseded
[RFC,5/7] power: supply: Clean-up few drivers by using managed work init Add managed version of delayed work init - - - --- 2021-02-13 Vaittinen, Matti Not Applicable
[RFC,2/7] extconn: Clean-up few drivers by using managed work init Add managed version of delayed work init - - - --- 2021-02-13 Vaittinen, Matti Not Applicable
[RFC,1/7] drivers: base: Add resource managed version of delayed work init Add managed version of delayed work init - - - --- 2021-02-13 Vaittinen, Matti Not Applicable
« 1 2 ... 523 524 525810 811 »