@@ -63,15 +63,25 @@ static void pdc_enable_intr(struct irq_data *d, bool on)
raw_spin_unlock(&pdc_lock);
}
-static void qcom_pdc_gic_mask(struct irq_data *d)
+static void qcom_pdc_gic_disable(struct irq_data *d)
{
pdc_enable_intr(d, false);
+ irq_chip_disable_parent(d);
+}
+
+static void qcom_pdc_gic_enable(struct irq_data *d)
+{
+ pdc_enable_intr(d, true);
+ irq_chip_enable_parent(d);
+}
+
+static void qcom_pdc_gic_mask(struct irq_data *d)
+{
irq_chip_mask_parent(d);
}
static void qcom_pdc_gic_unmask(struct irq_data *d)
{
- pdc_enable_intr(d, true);
irq_chip_unmask_parent(d);
}
@@ -148,6 +158,8 @@ static struct irq_chip qcom_pdc_gic_chip = {
.irq_eoi = irq_chip_eoi_parent,
.irq_mask = qcom_pdc_gic_mask,
.irq_unmask = qcom_pdc_gic_unmask,
+ .irq_disable = qcom_pdc_gic_disable,
+ .irq_enable = qcom_pdc_gic_enable,
.irq_retrigger = irq_chip_retrigger_hierarchy,
.irq_set_type = qcom_pdc_gic_set_type,
.flags = IRQCHIP_MASK_ON_SUSPEND |
When an interrupt is to be serviced, the convention is to mask the interrupt at the chip and unmask after servicing the interrupt. Enabling and disabling the interrupt at the PDC irqchip causes an interrupt storm due to the way dual edge interrupts are handled in hardware. Skip configuring the PDC when the IRQ is masked and unmasked, instead use the irq_enable/irq_disable callbacks to toggle the IRQ_ENABLE register at the PDC. The PDC's IRQ_ENABLE register is only used during the monitoring mode when the system is asleep and is not needed for active mode detection. Signed-off-by: Lina Iyer <ilina@codeaurora.org> --- drivers/irqchip/qcom-pdc.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)