diff mbox series

[v2,23/31] arm64: dts: qcom: sm6125-*: Remove thermal zone polling delays

Message ID 20240510-topic-msm-polling-cleanup-v2-23-436ca4218da2@linaro.org (mailing list archive)
State New
Headers show
Series Clean up thermal zone polling-delay | expand

Commit Message

Konrad Dybcio May 10, 2024, 11:59 a.m. UTC 
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/pm6125.dtsi                         | 1 -
 arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts | 8 --------
 arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts     | 6 ------
 3 files changed, 15 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/pm6125.dtsi b/arch/arm64/boot/dts/qcom/pm6125.dtsi
index 99369a0cdb61..d0db28336fa9 100644
--- a/arch/arm64/boot/dts/qcom/pm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/pm6125.dtsi
@@ -10,7 +10,6 @@  / {
 	thermal-zones {
 		pm6125-thermal {
 			polling-delay-passive = <100>;
-			polling-delay = <0>;
 
 			thermal-sensors = <&pm6125_temp>;
 
diff --git a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
index 08046f866f60..dcd05f303b78 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-sony-xperia-seine-pdx201.dts
@@ -90,8 +90,6 @@  cmdline_mem: memory@ffd00000 {
 
 	thermal-zones {
 		rf-pa0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm6125_adc_tm 0>;
 
 			trips {
@@ -104,8 +102,6 @@  active-config0 {
 		};
 
 		quiet-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <5000>;
 			thermal-sensors = <&pm6125_adc_tm 1>;
 
 			trips {
@@ -118,8 +114,6 @@  active-config0 {
 		};
 
 		xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm6125_adc_tm 2>;
 
 			trips {
@@ -132,8 +126,6 @@  active-config0 {
 		};
 
 		rf-pa1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm6125_adc_tm 3>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
index a49d3ebb1931..994fb0412fcb 100644
--- a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
+++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
@@ -84,8 +84,6 @@  key-volume-up {
 
 	thermal-zones {
 		rf-pa0-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm6125_adc_tm 0>;
 
 			trips {
@@ -98,8 +96,6 @@  active-config0 {
 		};
 
 		quiet-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <5000>;
 			thermal-sensors = <&pm6125_adc_tm 1>;
 
 			trips {
@@ -112,8 +108,6 @@  active-config0 {
 		};
 
 		xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm6125_adc_tm 2>;
 
 			trips {