@@ -1124,7 +1124,6 @@ pil-reloc@94c {
thermal-zones {
aoss0-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens 0>;
@@ -1139,7 +1138,6 @@ aoss0_alert0: trip-point0 {
modem-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens 1>;
trips {
@@ -1153,7 +1151,6 @@ modem_alert0: trip-point0 {
qdsp-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens 2>;
trips {
@@ -1167,7 +1164,6 @@ qdsp_alert0: trip-point0 {
cam-isp-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
thermal-sensors = <&tsens 3>;
trips {
@@ -1181,7 +1177,7 @@ cam_isp_alert0: trip-point0 {
cpu4-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
+
thermal-sensors = <&tsens 4>;
trips {
@@ -1205,7 +1201,7 @@ cpu4_crit: cpu-crit {
cpu5-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
+
thermal-sensors = <&tsens 5>;
trips {
@@ -1229,7 +1225,7 @@ cpu5_crit: cpu-crit {
cpu6-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
+
thermal-sensors = <&tsens 6>;
trips {
@@ -1253,7 +1249,7 @@ cpu6_crit: cpu-crit {
cpu7-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
+
thermal-sensors = <&tsens 7>;
trips {
@@ -1277,7 +1273,7 @@ cpu7_crit: cpu-crit {
big-l2-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
+
thermal-sensors = <&tsens 8>;
trips {
@@ -1301,7 +1297,7 @@ l2_crit: l2-crit {
cpu0-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
+
thermal-sensors = <&tsens 9>;
trips {
@@ -1325,7 +1321,7 @@ cpu0_crit: cpu-crit {
gpu-thermal {
polling-delay-passive = <250>;
- polling-delay = <1000>;
+
thermal-sensors = <&tsens 10>;
trips {
All of the thermal zone suppliers are interrupt-driven, remove the bogus and unnecessary polling that only wastes CPU time. Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org> --- arch/arm64/boot/dts/qcom/msm8976.dtsi | 18 +++++++----------- 1 file changed, 7 insertions(+), 11 deletions(-)