diff mbox series

[v2,27/31] arm64: dts: qcom: sm8250-*: Remove thermal zone polling delays

Message ID 20240510-topic-msm-polling-cleanup-v2-27-436ca4218da2@linaro.org (mailing list archive)
State New
Headers show
Series Clean up thermal zone polling-delay | expand

Commit Message

Konrad Dybcio May 10, 2024, 11:59 a.m. UTC 
All of the thermal zone suppliers are interrupt-driven, remove the
bogus and unnecessary polling that only wastes CPU time.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 10 ----------
 arch/arm64/boot/dts/qcom/sm8250-mtp.dts  | 14 --------------
 arch/arm64/boot/dts/qcom/sm8250.dtsi     | 25 -------------------------
 3 files changed, 49 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index cd0db4f31d4a..ce13fdfb0797 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -110,8 +110,6 @@  lt9611_3v3: lt9611-3v3 {
 
 	thermal-zones {
 		conn-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150b_adc_tm 0>;
 
 			trips {
@@ -124,8 +122,6 @@  active-config0 {
 		};
 
 		pm8150l-pcb-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 1>;
 
 			trips {
@@ -138,8 +134,6 @@  active-config0 {
 		};
 
 		skin-msm-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 0>;
 
 			trips {
@@ -152,8 +146,6 @@  active-config0 {
 		};
 
 		wifi-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150_adc_tm 1>;
 
 			trips {
@@ -166,8 +158,6 @@  active-config0 {
 		};
 
 		xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150_adc_tm 0>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
index 7ef99038cb37..21b2ca1def83 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-mtp.dts
@@ -53,8 +53,6 @@  chosen {
 
 	thermal-zones {
 		camera-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 0>;
 
 			trips {
@@ -67,8 +65,6 @@  active-config0 {
 		};
 
 		conn-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150b_adc_tm 0>;
 
 			trips {
@@ -81,8 +77,6 @@  active-config0 {
 		};
 
 		mmw-pa1-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150_adc_tm 2>;
 
 			trips {
@@ -95,8 +89,6 @@  active-config0 {
 		};
 
 		mmw-pa2-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 2>;
 
 			trips {
@@ -109,8 +101,6 @@  active-config0 {
 		};
 
 		skin-msm-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150l_adc_tm 1>;
 
 			trips {
@@ -123,8 +113,6 @@  active-config0 {
 		};
 
 		skin-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150_adc_tm 1>;
 
 			trips {
@@ -137,8 +125,6 @@  active-config0 {
 		};
 
 		xo-thermal {
-			polling-delay-passive = <0>;
-			polling-delay = <0>;
 			thermal-sensors = <&pm8150_adc_tm 0>;
 
 			trips {
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 8ccade628f1f..1a1202bdd915 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -6275,7 +6275,6 @@  timer {
 	thermal-zones {
 		cpu0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 1>;
 
@@ -6319,7 +6318,6 @@  map1 {
 
 		cpu1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 2>;
 
@@ -6363,7 +6361,6 @@  map1 {
 
 		cpu2-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 3>;
 
@@ -6407,7 +6404,6 @@  map1 {
 
 		cpu3-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 4>;
 
@@ -6451,7 +6447,6 @@  map1 {
 
 		cpu4-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 7>;
 
@@ -6495,7 +6490,6 @@  map1 {
 
 		cpu5-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 8>;
 
@@ -6539,7 +6533,6 @@  map1 {
 
 		cpu6-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 9>;
 
@@ -6583,7 +6576,6 @@  map1 {
 
 		cpu7-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 10>;
 
@@ -6627,7 +6619,6 @@  map1 {
 
 		cpu4-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 11>;
 
@@ -6671,7 +6662,6 @@  map1 {
 
 		cpu5-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 12>;
 
@@ -6715,7 +6705,6 @@  map1 {
 
 		cpu6-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 13>;
 
@@ -6759,7 +6748,6 @@  map1 {
 
 		cpu7-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 14>;
 
@@ -6803,7 +6791,6 @@  map1 {
 
 		aoss0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 0>;
 
@@ -6818,7 +6805,6 @@  aoss0_alert0: trip-point0 {
 
 		cluster0-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 5>;
 
@@ -6838,7 +6824,6 @@  cluster0_crit: cluster0-crit {
 
 		cluster1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 6>;
 
@@ -6858,7 +6843,6 @@  cluster1_crit: cluster1-crit {
 
 		gpu-top-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens0 15>;
 
@@ -6880,7 +6864,6 @@  gpu_top_alert0: trip-point0 {
 
 		aoss1-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 0>;
 
@@ -6895,7 +6878,6 @@  aoss1_alert0: trip-point0 {
 
 		wlan-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 1>;
 
@@ -6910,7 +6892,6 @@  wlan_alert0: trip-point0 {
 
 		video-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 2>;
 
@@ -6925,7 +6906,6 @@  video_alert0: trip-point0 {
 
 		mem-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 3>;
 
@@ -6940,7 +6920,6 @@  mem_alert0: trip-point0 {
 
 		q6-hvx-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 4>;
 
@@ -6955,7 +6934,6 @@  q6_hvx_alert0: trip-point0 {
 
 		camera-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 5>;
 
@@ -6970,7 +6948,6 @@  camera_alert0: trip-point0 {
 
 		compute-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 6>;
 
@@ -6985,7 +6962,6 @@  compute_alert0: trip-point0 {
 
 		npu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 7>;
 
@@ -7000,7 +6976,6 @@  npu_alert0: trip-point0 {
 
 		gpu-bottom-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
 
 			thermal-sensors = <&tsens1 8>;