diff mbox series

[v2,16/49] staging: sm750fb: Update function parameter names in ddk750_sii164.c

Message ID 53df8b6501a7849644fba613e194bfc297abb7c7.1617776878.git.pavle.rohalj@gmail.com (mailing list archive)
State Superseded, archived
Headers show
Series *** SUBJECT HERE *** | expand

Commit Message

Pavle Rohalj April 7, 2021, 6:37 a.m. UTC 
Fix "Avoid CamelCase" checkpatch.pl checks for function
parameters in ddk750_sii164.c.

Signed-off-by: Pavle Rohalj <pavle.rohalj@gmail.com>
---
 drivers/staging/sm750fb/ddk750_sii164.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)
diff mbox series

Patch

diff --git a/drivers/staging/sm750fb/ddk750_sii164.c b/drivers/staging/sm750fb/ddk750_sii164.c
index a7e0f001d96f..869d74f53a6a 100644
--- a/drivers/staging/sm750fb/ddk750_sii164.c
+++ b/drivers/staging/sm750fb/ddk750_sii164.c
@@ -277,14 +277,14 @@  char *sii164_get_chip_string(void)
  *      This function sets the power configuration of the DVI Controller Chip.
  *
  *  Input:
- *      powerUp - Flag to set the power down or up
+ *      power_up - Flag to set the power down or up
  */
-void sii164_set_power(unsigned char powerUp)
+void sii164_set_power(unsigned char power_up)
 {
 	unsigned char config;
 
 	config = i2c_read_reg(SII164_I2C_ADDRESS, SII164_CONFIGURATION);
-	if (powerUp == 1) {
+	if (power_up == 1) {
 		/* Power up the chip */
 		config &= ~SII164_CONFIGURATION_POWER_MASK;
 		config |= SII164_CONFIGURATION_POWER_NORMAL;
@@ -302,13 +302,13 @@  void sii164_set_power(unsigned char powerUp)
  *      This function selects the mode of the hot plug detection.
  */
 static
-void sii164_select_hot_plug_detection_mode(enum sii164_hot_plug_mode hotPlugMode)
+void sii164_select_hot_plug_detection_mode(enum sii164_hot_plug_mode hot_plug_mode)
 {
 	unsigned char detectReg;
 
 	detectReg = i2c_read_reg(SII164_I2C_ADDRESS, SII164_DETECT) &
 		    ~SII164_DETECT_MONITOR_SENSE_OUTPUT_FLAG;
-	switch (hotPlugMode) {
+	switch (hot_plug_mode) {
 	case SII164_HOTPLUG_DISABLE:
 		detectReg |= SII164_DETECT_MONITOR_SENSE_OUTPUT_HIGH;
 		break;
@@ -332,9 +332,9 @@  void sii164_select_hot_plug_detection_mode(enum sii164_hot_plug_mode hotPlugMode
  *  sii164_enable_hot_plug_detection
  *      This function enables the Hot Plug detection.
  *
- *  enableHotPlug   - Enable (=1) / disable (=0) Hot Plug detection
+ *  enable_hot_plug   - Enable (=1) / disable (=0) Hot Plug detection
  */
-void sii164_enable_hot_plug_detection(unsigned char enableHotPlug)
+void sii164_enable_hot_plug_detection(unsigned char enable_hot_plug)
 {
 	unsigned char detectReg;
 
@@ -343,7 +343,7 @@  void sii164_enable_hot_plug_detection(unsigned char enableHotPlug)
 	/* Depending on each DVI controller, need to enable the hot plug based
 	 * on each individual chip design.
 	 */
-	if (enableHotPlug != 0)
+	if (enable_hot_plug != 0)
 		sii164_select_hot_plug_detection_mode(SII164_HOTPLUG_USE_MDI);
 	else
 		sii164_select_hot_plug_detection_mode(SII164_HOTPLUG_DISABLE);