Show patches with: State = Action Required       |    Archived = No       |   193 patches
« 1 2 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v12,1/6] arm64: dts: qcom: sm8450: Add interconnect path to PCIe node PCI: qcom: Add support for OPP - 1 - --- 2024-04-27 Krishna Chaitanya Chundru New
[v4,2/2] PCI: of: Attach created of_node to existing device Attach DT nodes to existing PCI devices - - - --- 2024-04-23 Herve Codina New
[v4,1/2] driver core: Introduce device_{add,remove}_of_node() Attach DT nodes to existing PCI devices - - - --- 2024-04-23 Herve Codina New
[v4] dt-bindings: PCI: altera: Convert to YAML [v4] dt-bindings: PCI: altera: Convert to YAML - - - --- 2024-04-20 Matthew Gerlach New
[v5,11/11] PCI: j721e: Add suspend and resume support Add suspend to ram support for PCIe on J7200 - 1 - --- 2024-04-16 Thomas Richard New
[v5,10/11] PCI: j721e: Use T_PERST_CLK_US macro Add suspend to ram support for PCIe on J7200 - - - --- 2024-04-16 Thomas Richard New
[v5,09/11] PCI: Add T_PERST_CLK_US macro Add suspend to ram support for PCIe on J7200 - - - --- 2024-04-16 Thomas Richard New
[v5,08/11] PCI: j721e: Add reset GPIO to struct j721e_pcie Add suspend to ram support for PCIe on J7200 - - - --- 2024-04-16 Thomas Richard New
[v5,07/11] PCI: j721e: Use dev_err_probe() in the probe() function Add suspend to ram support for PCIe on J7200 - 1 - --- 2024-04-16 Thomas Richard New
[v5,06/11] PCI: cadence: Set cdns_pcie_host_init() global Add suspend to ram support for PCIe on J7200 - 1 - --- 2024-04-16 Thomas Richard New
[v5,05/11] PCI: cadence: Extract link setup sequence from cdns_pcie_host_setup() Add suspend to ram support for PCIe on J7200 - 1 - --- 2024-04-16 Thomas Richard New
[v5,04/11] mux: mmio: add resume support Add suspend to ram support for PCIe on J7200 - - - --- 2024-04-16 Thomas Richard New
[v5,03/11] mux: add mux_chip_resume() function Add suspend to ram support for PCIe on J7200 - - - --- 2024-04-16 Thomas Richard New
[v5,02/11] i2c: omap: wakeup the controller during suspend() callback Add suspend to ram support for PCIe on J7200 1 2 - --- 2024-04-16 Thomas Richard New
[v5,01/11] gpio: pca953x: move suspend()/resume() to suspend_noirq()/resume_noirq() Add suspend to ram support for PCIe on J7200 1 3 - --- 2024-04-16 Thomas Richard New
[v8,3/3] PCI/DPC: Disable DPC service on suspend [v8,1/3] PCI: Add helper to check if any of ancestor device support D3cold - - - --- 2024-04-16 Kai-Heng Feng bhelgaas New
[v8,2/3] PCI/AER: Disable AER service on suspend [v8,1/3] PCI: Add helper to check if any of ancestor device support D3cold - 1 - --- 2024-04-16 Kai-Heng Feng bhelgaas New
[v8,1/3] PCI: Add helper to check if any of ancestor device support D3cold [v8,1/3] PCI: Add helper to check if any of ancestor device support D3cold - - - --- 2024-04-16 Kai-Heng Feng bhelgaas New
[v7,16/16] PCI/pwrctl: add a PCI power control driver for power sequenced devices power: sequencing: implement the subsystem and add first users - - - --- 2024-04-10 Bartosz Golaszewski New
[v7,15/16] Bluetooth: qca: use the power sequencer for QCA6390 power: sequencing: implement the subsystem and add first users - - - --- 2024-04-10 Bartosz Golaszewski New
[v7,14/16] power: pwrseq: add a driver for the PMU module on the QCom WCN chipsets power: sequencing: implement the subsystem and add first users - - - --- 2024-04-10 Bartosz Golaszewski New
[v7,13/16] power: sequencing: implement the pwrseq core power: sequencing: implement the subsystem and add first users - - - --- 2024-04-10 Bartosz Golaszewski New
[v7,12/16] PCI/pwrctl: add PCI power control core code power: sequencing: implement the subsystem and add first users - - - --- 2024-04-10 Bartosz Golaszewski New
[v7,11/16] PCI/pwrctl: create platform devices for child OF nodes of the port node power: sequencing: implement the subsystem and add first users - - - --- 2024-04-10 Bartosz Golaszewski New
[v7,10/16] PCI/pwrctl: reuse the OF node for power controlled devices power: sequencing: implement the subsystem and add first users - - - --- 2024-04-10 Bartosz Golaszewski New
[v7,09/16] PCI: hold the rescan mutex when scanning for the first time power: sequencing: implement the subsystem and add first users - - - --- 2024-04-10 Bartosz Golaszewski New
[v7,08/16] arm64: dts: qcom: qrb5165-rb5: add the Wifi node power: sequencing: implement the subsystem and add first users - - - --- 2024-04-10 Bartosz Golaszewski New
[v7,07/16] arm64: dts: qcom: sm8650-qrd: add the Wifi node power: sequencing: implement the subsystem and add first users - - - --- 2024-04-10 Bartosz Golaszewski New
[v7,06/16] arm64: dts: qcom: sm8550-qrd: add the Wifi node power: sequencing: implement the subsystem and add first users - - - --- 2024-04-10 Bartosz Golaszewski New
[v7,05/16] dt-bindings: net: wireless: describe the ath12k PCI module power: sequencing: implement the subsystem and add first users - 1 - --- 2024-04-10 Bartosz Golaszewski New
[v7,04/16] dt-bindings: net: wireless: qcom,ath11k: describe the ath11k on QCA6390 power: sequencing: implement the subsystem and add first users - 1 - --- 2024-04-10 Bartosz Golaszewski New
[v7,03/16] dt-bindings: net: bluetooth: qualcomm: describe regulators for QCA6390 power: sequencing: implement the subsystem and add first users - 1 - --- 2024-04-10 Bartosz Golaszewski New
[v7,02/16] regulator: dt-bindings: describe the PMU module of the WCN7850 package power: sequencing: implement the subsystem and add first users 1 1 - --- 2024-04-10 Bartosz Golaszewski New
[v7,01/16] regulator: dt-bindings: describe the PMU module of the QCA6390 package power: sequencing: implement the subsystem and add first users 1 1 - --- 2024-04-10 Bartosz Golaszewski New
[v9,4/4] PCI: brcmstb: Configure HW CLKREQ# mode appropriate for downstream device PCI: brcmstb: Configure appropriate HW CLKREQ# mode - - - --- 2024-04-03 Jim Quinlan New
[v9,3/4] PCI: brcmstb: Set downstream maximum {no-}snoop LTR values PCI: brcmstb: Configure appropriate HW CLKREQ# mode - - - --- 2024-04-03 Jim Quinlan New
[v9,2/4] PCI: brcmstb: Set reasonable value for internal bus timeout PCI: brcmstb: Configure appropriate HW CLKREQ# mode - - - --- 2024-04-03 Jim Quinlan New
[v9,1/4] dt-bindings: PCI: brcmstb: Add property "brcm,clkreq-mode" PCI: brcmstb: Configure appropriate HW CLKREQ# mode 1 1 - --- 2024-04-03 Jim Quinlan New
[RFC,2/2] PCI: Remove MWI and INTX related members from struct pci_devres PCI: Restore original PCI_COMMAND value in pcim_release - - - --- 2024-03-29 Heiner Kallweit bhelgaas New
[RFC,1/2] PCI: Restore original PCI_COMMAND value in pcim_release PCI: Restore original PCI_COMMAND value in pcim_release - - - --- 2024-03-29 Heiner Kallweit bhelgaas New
[2/2] r8169: use new function pcim_iomap_region() PCI: Add and use pcim_iomap_region() - - - --- 2024-03-27 Heiner Kallweit bhelgaas New
[1/2] PCI: Add pcim_iomap_region PCI: Add and use pcim_iomap_region() - - - --- 2024-03-27 Heiner Kallweit bhelgaas New
[v4,4/4] PCI: Allow PCI bridges to go to D3Hot on all Devicetree based platforms PCI: Allow D3Hot for PCI bridges in Devicetree based platforms - - - --- 2024-03-26 Manivannan Sadhasivam bhelgaas New
[v4,3/4] PCI: Decouple D3Hot and D3Cold handling for bridges PCI: Allow D3Hot for PCI bridges in Devicetree based platforms - - - --- 2024-03-26 Manivannan Sadhasivam bhelgaas New
[v4,2/4] PCI: Rename pci_bridge_d3_possible() to pci_bridge_d3_allowed() PCI: Allow D3Hot for PCI bridges in Devicetree based platforms - - - --- 2024-03-26 Manivannan Sadhasivam bhelgaas New
[v4,1/4] PCI/portdrv: Make use of pci_dev::bridge_d3 for checking the D3 possibility PCI: Allow D3Hot for PCI bridges in Devicetree based platforms - - - --- 2024-03-26 Manivannan Sadhasivam bhelgaas New
fix memory leak in pci_bus_set_aer_ops fix memory leak in pci_bus_set_aer_ops - - - --- 2024-03-14 Zijie Zhao bhelgaas New
[1/1] PCI: layerscape(ep): Implement common 'dbi' reg-names for dbi_base [1/1] PCI: layerscape(ep): Implement common 'dbi' reg-names for dbi_base - - - --- 2024-02-29 Frank Li kwilczynski New
[v2,3/3] PCI/DPC: Encapsulate pci_acpi_add_edr_notifier() PCI/DPC: Clean up DPC vs AER/EDR ownership and Kconfig - - - --- 2024-02-22 Bjorn Helgaas bhelgaas New
[v2,2/3] PCI/DPC: Remove CONFIG_PCIE_EDR PCI/DPC: Clean up DPC vs AER/EDR ownership and Kconfig - - - --- 2024-02-22 Bjorn Helgaas bhelgaas New
[v2,1/3] PCI/DPC: Request DPC only if also requesting AER PCI/DPC: Clean up DPC vs AER/EDR ownership and Kconfig - 1 - --- 2024-02-22 Bjorn Helgaas bhelgaas New
[v2,2/2] pci/iov: fix kobject_uevent() ordering in sriov_enable() PCI/IOV: sriov_numvfs bug fixes - 2 - --- 2024-02-09 Jim Harris bhelgaas New
[v2,1/2] PCI/IOV: Revert "PCI/IOV: Serialize sysfs sriov_numvfs reads vs writes" PCI/IOV: sriov_numvfs bug fixes - 1 - --- 2024-02-09 Jim Harris bhelgaas New
[v2,4/4] RAS: Trace more information in aer_event PCI/AER: Handle Advisory Non-Fatal properly - - - --- 2024-01-25 Wang, Qingshun bhelgaas New
[v2,3/4] PCI/AER: Fetch information for FTrace PCI/AER: Handle Advisory Non-Fatal properly - - - --- 2024-01-25 Wang, Qingshun bhelgaas New
[v2,2/4] PCI/AER: Handle Advisory Non-Fatal properly PCI/AER: Handle Advisory Non-Fatal properly - - - --- 2024-01-25 Wang, Qingshun bhelgaas New
[v2,1/4] PCI/AER: Store more information in aer_err_info PCI/AER: Handle Advisory Non-Fatal properly - - - --- 2024-01-25 Wang, Qingshun bhelgaas New
[v4] acpi,pci: warn about duplicate IRQ routing entries returned from _PRT [v4] acpi,pci: warn about duplicate IRQ routing entries returned from _PRT - 1 1 --- 2023-12-26 Mateusz Jończyk bhelgaas New
[v2] x86/pci: Stop requiring ECAM to be declared in E820, ACPI or EFI [v2] x86/pci: Stop requiring ECAM to be declared in E820, ACPI or EFI - - - --- 2023-12-15 Limonciello, Mario bhelgaas New
[2/2] PCI/portdrv: Place PCIe port hierarchy into D3cold at shutdown Improvements to system power consumption at S5 - - - --- 2023-12-13 Limonciello, Mario bhelgaas New
[1/2] PCI: Avoid runtime resuming devices if system is shutting down Improvements to system power consumption at S5 - - - --- 2023-12-13 Limonciello, Mario bhelgaas New
[v2] PCI: Prevent device from doing RPM when it's unplugged [v2] PCI: Prevent device from doing RPM when it's unplugged - - 1 --- 2023-12-12 Kai-Heng Feng bhelgaas New
[v2,3/3] PCI: mediatek-gen3: Allocate MSI address with dmam_alloc_coherent() PCI: mediatek: Allocate MSI address with dmam_alloc_coherent() - - - --- 2023-12-11 Jianjun Wang (王建军) New
[v2,2/3] PCI: mediatek-gen3: Do not break probe flow when MSI init fails PCI: mediatek: Allocate MSI address with dmam_alloc_coherent() - - - --- 2023-12-11 Jianjun Wang (王建军) New
[v2,1/3] PCI: mediatek: Allocate MSI address with dmam_alloc_coherent() PCI: mediatek: Allocate MSI address with dmam_alloc_coherent() - - - --- 2023-12-11 Jianjun Wang (王建军) New
PCI: Fix null pointer dereference in of_pci_prop_compatible PCI: Fix null pointer dereference in of_pci_prop_compatible - - - --- 2023-12-04 Kunwu Chan bhelgaas New
[v2,4/4] platform/x86/amd: pmc: Add support for using constraints to decide D3 policy Add support for drivers to decide bridge D3 policy 1 - - --- 2023-12-03 Limonciello, Mario bhelgaas New
[v2,3/4] ACPI: x86: s2idle: Export symbol for fetching constraints for module use Add support for drivers to decide bridge D3 policy 1 - - --- 2023-12-03 Limonciello, Mario bhelgaas New
[v2,2/4] PCI: Refresh root ports in pci_bridge_d3_update() Add support for drivers to decide bridge D3 policy - - - --- 2023-12-03 Limonciello, Mario bhelgaas New
[v2,1/4] PCI: Make d3cold_allowed sysfs attribute read only Add support for drivers to decide bridge D3 policy 1 - - --- 2023-12-03 Limonciello, Mario bhelgaas New
[v2,2/2] PCI: of: Attach created of_node to existing device Attach DT nodes to existing PCI devices - - - --- 2023-11-30 Herve Codina bhelgaas New
[v2,1/2] driver core: Introduce device_{add,remove}_of_node() Attach DT nodes to existing PCI devices - - - --- 2023-11-30 Herve Codina bhelgaas New
[v2,18/18] PCI: rockchip-ep: Handle PERST# signal in endpoint mode Improve PCI memory mapping API - - - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,17/18] dt-bindings: pci: rockchip,rk3399-pcie-ep: Add ep-gpios property Improve PCI memory mapping API - - - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,16/18] PCI: rockchip-ep: Improve link training Improve PCI memory mapping API - - 1 --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,15/18] PCI: rockship-ep: Introduce rockchip_pcie_ep_stop() Improve PCI memory mapping API - - - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,14/18] PCI: rockchip-ep: Refactor endpoint link training enable Improve PCI memory mapping API - - - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,13/18] PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding Improve PCI memory mapping API - - - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,12/18] PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations Improve PCI memory mapping API - - - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,11/18] PCI: rockchip-ep: Implement the map_align endpoint controller operation Improve PCI memory mapping API - - - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,10/18] PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr() Improve PCI memory mapping API - - - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,09/18] PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr() Improve PCI memory mapping API - - - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,08/18] PCI: rockchip-ep: Use a macro to define EP controller .align feature Improve PCI memory mapping API - - - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,07/18] PCI: rockchip-ep: Fix address translation unit programming Improve PCI memory mapping API - - - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,06/18] PCI: endpoint: test: Implement link_down event operation Improve PCI memory mapping API - 1 - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,05/18] PCI: endpoint: test: Synchronously cancel command handler work Improve PCI memory mapping API - 3 - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,04/18] PCI: endpoint: test: Use pci_epc_mem_map/unmap() Improve PCI memory mapping API - - - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,03/18] PCI: endpoint: Introduce pci_epc_mem_map()/unmap() Improve PCI memory mapping API - - - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,02/18] PCI: endpoint: Introduce pci_epc_map_align() Improve PCI memory mapping API - - - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,01/18] PCI: endpoint: Introduce pci_epc_function_is_valid() Improve PCI memory mapping API - 2 - --- 2024-03-30 Damien Le Moal mani_sadhasivam Under Review
[v2,3/3] PCI: dwc: Create debugfs files in DWC driver Add support for RAS DES feature in PCIe DW controller - - - --- 2023-11-30 Shradha Todi mani_sadhasivam Under Review
[v2,2/3] PCI: debugfs: Add support for RASDES framework in DWC Add support for RAS DES feature in PCIe DW controller - - - --- 2023-11-30 Shradha Todi mani_sadhasivam Under Review
[v2,1/3] PCI: dwc: Add support for vendor specific capability search Add support for RAS DES feature in PCIe DW controller - - - --- 2023-11-30 Shradha Todi mani_sadhasivam Under Review
« 1 2 »