diff mbox series

[v6,22/24] dmaengine: dw-edma: Bypass dma-ranges mapping for the local setup

Message ID 20221107210438.1515-23-Sergey.Semin@baikalelectronics.ru (mailing list archive)
State Superseded
Delegated to: Lorenzo Pieralisi
Headers show
Series dmaengine: dw-edma: Add RP/EP local DMA controllers support | expand

Commit Message

Serge Semin Nov. 7, 2022, 9:04 p.m. UTC
DW eDMA doesn't perform any translation of the traffic generated on the
CPU/Application side. It just generates read/write AXI-bus requests with
the specified addresses. But in case if the dma-ranges DT-property is
specified for a platform device node, Linux will use it to create a
mapping the PCIe-bus regions into the CPU memory ranges. This isn't what
we want for the eDMA embedded into the locally accessed DW PCIe Root Port
and End-point. In order to work that around let's set the chan_dma_dev
flag for each DW eDMA channel thus forcing the client drivers to getting a
custom dma-ranges-less parental device for the mappings.

Note it will only work for the client drivers using the
dmaengine_get_dma_device() method to get the parental DMA device.

Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>

---

Changelog v2:
- Fix the comment a bit to being clearer. (@Manivannan)

Changelog v3:
- Conditionally set dchan->dev->device.dma_coherent field since it can
  be missing on some platforms. (@Manivannan)
- Remove Manivannan' rb and tb tags since the patch content has been
  changed.

Changelog v6:
- Directly call *_dma_configure() method on the child device used for
  the DMA buffers mapping. (@Robin)
- Explicitly set the DMA-mask of the child device in the channel
  allocation proecedure. (@Robin)
- Drop @Manivannan and @Vinod rb- and ab-tags due to significant patch
  content change.
---
 drivers/dma/dw-edma/dw-edma-core.c | 44 ++++++++++++++++++++++++++++++
 1 file changed, 44 insertions(+)

Comments

Serge Semin Nov. 7, 2022, 9:11 p.m. UTC | #1
On Tue, Nov 08, 2022 at 12:04:36AM +0300, Serge Semin wrote:
> DW eDMA doesn't perform any translation of the traffic generated on the
> CPU/Application side. It just generates read/write AXI-bus requests with
> the specified addresses. But in case if the dma-ranges DT-property is
> specified for a platform device node, Linux will use it to create a
> mapping the PCIe-bus regions into the CPU memory ranges. This isn't what
> we want for the eDMA embedded into the locally accessed DW PCIe Root Port
> and End-point. In order to work that around let's set the chan_dma_dev
> flag for each DW eDMA channel thus forcing the client drivers to getting a
> custom dma-ranges-less parental device for the mappings.
> 
> Note it will only work for the client drivers using the
> dmaengine_get_dma_device() method to get the parental DMA device.

@Robin, we particularly need you opinion on this patch. I did as you
said: call *_dma_configure() method to initialize the child device and
set the DMA-mask here instead of the platform driver.

@Vinoud, @Manivannan I had to drop your tags from this patch since its
content had been significantly changed.

-Sergey

> 
> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> 
> ---
> 
> Changelog v2:
> - Fix the comment a bit to being clearer. (@Manivannan)
> 
> Changelog v3:
> - Conditionally set dchan->dev->device.dma_coherent field since it can
>   be missing on some platforms. (@Manivannan)
> - Remove Manivannan' rb and tb tags since the patch content has been
>   changed.
> 
> Changelog v6:
> - Directly call *_dma_configure() method on the child device used for
>   the DMA buffers mapping. (@Robin)
> - Explicitly set the DMA-mask of the child device in the channel
>   allocation proecedure. (@Robin)
> - Drop @Manivannan and @Vinod rb- and ab-tags due to significant patch
>   content change.
> ---
>  drivers/dma/dw-edma/dw-edma-core.c | 44 ++++++++++++++++++++++++++++++
>  1 file changed, 44 insertions(+)
> 
> diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
> index e3671bfbe186..846518509753 100644
> --- a/drivers/dma/dw-edma/dw-edma-core.c
> +++ b/drivers/dma/dw-edma/dw-edma-core.c
> @@ -6,9 +6,11 @@
>   * Author: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
>   */
>  
> +#include <linux/acpi.h>
>  #include <linux/module.h>
>  #include <linux/device.h>
>  #include <linux/kernel.h>
> +#include <linux/of_device.h>
>  #include <linux/dmaengine.h>
>  #include <linux/err.h>
>  #include <linux/interrupt.h>
> @@ -711,10 +713,52 @@ static irqreturn_t dw_edma_interrupt_common(int irq, void *data)
>  static int dw_edma_alloc_chan_resources(struct dma_chan *dchan)
>  {
>  	struct dw_edma_chan *chan = dchan2dw_edma_chan(dchan);
> +	struct device *dev = chan->dw->chip->dev;
> +	int ret;
>  
>  	if (chan->status != EDMA_ST_IDLE)
>  		return -EBUSY;
>  
> +	/* Bypass the dma-ranges based memory regions mapping for the eDMA
> +	 * controlled from the CPU/Application side since in that case
> +	 * the local memory address is left untranslated.
> +	 */
> +	if (chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL) {
> +		ret = dma_coerce_mask_and_coherent(&dchan->dev->device,
> +						   DMA_BIT_MASK(64));
> +		if (ret) {
> +			ret = dma_coerce_mask_and_coherent(&dchan->dev->device,
> +							   DMA_BIT_MASK(32));
> +			if (ret)
> +				return ret;
> +		}
> +
> +		if (dev_of_node(dev)) {
> +			struct device_node *node = dev_of_node(dev);
> +
> +			ret = of_dma_configure(&dchan->dev->device, node, true);
> +		} else if (has_acpi_companion(dev)) {
> +			struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
> +
> +			ret = acpi_dma_configure(&dchan->dev->device,
> +						 acpi_get_dma_attr(adev));
> +		} else {
> +			ret = -EINVAL;
> +		}
> +
> +		if (ret)
> +			return ret;
> +
> +		if (dchan->dev->device.dma_range_map) {
> +			kfree(dchan->dev->device.dma_range_map);
> +			dchan->dev->device.dma_range_map = NULL;
> +		}
> +
> +		dchan->dev->chan_dma_dev = true;
> +	} else {
> +		dchan->dev->chan_dma_dev = false;
> +	}
> +
>  	return 0;
>  }
>  
> -- 
> 2.38.0
> 
>
Robin Murphy Nov. 25, 2022, 3:32 p.m. UTC | #2
On 2022-11-07 21:11, Serge Semin wrote:
> On Tue, Nov 08, 2022 at 12:04:36AM +0300, Serge Semin wrote:
>> DW eDMA doesn't perform any translation of the traffic generated on the
>> CPU/Application side. It just generates read/write AXI-bus requests with
>> the specified addresses. But in case if the dma-ranges DT-property is
>> specified for a platform device node, Linux will use it to create a
>> mapping the PCIe-bus regions into the CPU memory ranges. This isn't what
>> we want for the eDMA embedded into the locally accessed DW PCIe Root Port
>> and End-point. In order to work that around let's set the chan_dma_dev
>> flag for each DW eDMA channel thus forcing the client drivers to getting a
>> custom dma-ranges-less parental device for the mappings.
>>
>> Note it will only work for the client drivers using the
>> dmaengine_get_dma_device() method to get the parental DMA device.
> 
> @Robin, we particularly need you opinion on this patch. I did as you
> said: call *_dma_configure() method to initialize the child device and
> set the DMA-mask here instead of the platform driver.

Apologies, I've been busy and this series got buried in my inbox before 
I'd clocked it as something I was supposed to be looking at.

> @Vinoud, @Manivannan I had to drop your tags from this patch since its
> content had been significantly changed.
> 
> -Sergey
> 
>>
>> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
>>
>> ---
>>
>> Changelog v2:
>> - Fix the comment a bit to being clearer. (@Manivannan)
>>
>> Changelog v3:
>> - Conditionally set dchan->dev->device.dma_coherent field since it can
>>    be missing on some platforms. (@Manivannan)
>> - Remove Manivannan' rb and tb tags since the patch content has been
>>    changed.
>>
>> Changelog v6:
>> - Directly call *_dma_configure() method on the child device used for
>>    the DMA buffers mapping. (@Robin)
>> - Explicitly set the DMA-mask of the child device in the channel
>>    allocation proecedure. (@Robin)
>> - Drop @Manivannan and @Vinod rb- and ab-tags due to significant patch
>>    content change.
>> ---
>>   drivers/dma/dw-edma/dw-edma-core.c | 44 ++++++++++++++++++++++++++++++
>>   1 file changed, 44 insertions(+)
>>
>> diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
>> index e3671bfbe186..846518509753 100644
>> --- a/drivers/dma/dw-edma/dw-edma-core.c
>> +++ b/drivers/dma/dw-edma/dw-edma-core.c
>> @@ -6,9 +6,11 @@
>>    * Author: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
>>    */
>>   
>> +#include <linux/acpi.h>
>>   #include <linux/module.h>
>>   #include <linux/device.h>
>>   #include <linux/kernel.h>
>> +#include <linux/of_device.h>
>>   #include <linux/dmaengine.h>
>>   #include <linux/err.h>
>>   #include <linux/interrupt.h>
>> @@ -711,10 +713,52 @@ static irqreturn_t dw_edma_interrupt_common(int irq, void *data)
>>   static int dw_edma_alloc_chan_resources(struct dma_chan *dchan)
>>   {
>>   	struct dw_edma_chan *chan = dchan2dw_edma_chan(dchan);
>> +	struct device *dev = chan->dw->chip->dev;
>> +	int ret;
>>   
>>   	if (chan->status != EDMA_ST_IDLE)
>>   		return -EBUSY;
>>   
>> +	/* Bypass the dma-ranges based memory regions mapping for the eDMA
>> +	 * controlled from the CPU/Application side since in that case
>> +	 * the local memory address is left untranslated.
>> +	 */
>> +	if (chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL) {
>> +		ret = dma_coerce_mask_and_coherent(&dchan->dev->device,
>> +						   DMA_BIT_MASK(64));
>> +		if (ret) {

Setting a 64-bit mask should never fail, especially on any platform that 
will actually run this code.

>> +			ret = dma_coerce_mask_and_coherent(&dchan->dev->device,
>> +							   DMA_BIT_MASK(32));
>> +			if (ret)
>> +				return ret;
>> +		}
>> +
>> +		if (dev_of_node(dev)) {
>> +			struct device_node *node = dev_of_node(dev);
>> +
>> +			ret = of_dma_configure(&dchan->dev->device, node, true);
>> +		} else if (has_acpi_companion(dev)) {

Can this can ever happen? AFAICS there's no ACPI binding to match and 
probe the DWC driver, at best it could only probe as a standard PNP0A08 
host bridge which wouldn't know anything about eDMA anyway.

>> +			struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
>> +
>> +			ret = acpi_dma_configure(&dchan->dev->device,
>> +						 acpi_get_dma_attr(adev));
>> +		} else {
>> +			ret = -EINVAL;
>> +		}
>> +
>> +		if (ret)
>> +			return ret;
>> +
>> +		if (dchan->dev->device.dma_range_map) {
>> +			kfree(dchan->dev->device.dma_range_map);
>> +			dchan->dev->device.dma_range_map = NULL;
>> +		}

Ugh, I guess this is still here because now you're passing the channel 
device to of_dma_configure() such that it looks like a PCI child :(

Can we just set "chan->dev->device.of_node = dev->of_node;" beforehand 
so it works as expected (with f1ad5338a4d5 in place) and we don't need 
to be messing with the dma_range_map details at all? Note that that 
isn't as hacky as it might sound - it's a relatively well-established 
practice in places like I2C and SPI, and in this case it seems perfectly 
appropriate semantically as well.

(And there should be no need to bother with of_node refcounting, since 
the lifetime of the eDMA driver is bounded by the lifetime of the PCIe 
driver, thus the lifetime of the DMA channel devices is bounded by the 
lifetime of the PCIe platform device, which already holds a reference 
from of_device_alloc().)

Thanks,
Robin.

>> +
>> +		dchan->dev->chan_dma_dev = true;
>> +	} else {
>> +		dchan->dev->chan_dma_dev = false;
>> +	}
>> +
>>   	return 0;
>>   }
>>   
>> -- 
>> 2.38.0
>>
>>
Serge Semin Nov. 26, 2022, 11:45 p.m. UTC | #3
On Fri, Nov 25, 2022 at 03:32:23PM +0000, Robin Murphy wrote:
> On 2022-11-07 21:11, Serge Semin wrote:
> > On Tue, Nov 08, 2022 at 12:04:36AM +0300, Serge Semin wrote:
> > > DW eDMA doesn't perform any translation of the traffic generated on the
> > > CPU/Application side. It just generates read/write AXI-bus requests with
> > > the specified addresses. But in case if the dma-ranges DT-property is
> > > specified for a platform device node, Linux will use it to create a
> > > mapping the PCIe-bus regions into the CPU memory ranges. This isn't what
> > > we want for the eDMA embedded into the locally accessed DW PCIe Root Port
> > > and End-point. In order to work that around let's set the chan_dma_dev
> > > flag for each DW eDMA channel thus forcing the client drivers to getting a
> > > custom dma-ranges-less parental device for the mappings.
> > > 
> > > Note it will only work for the client drivers using the
> > > dmaengine_get_dma_device() method to get the parental DMA device.
> > 
> > @Robin, we particularly need you opinion on this patch. I did as you
> > said: call *_dma_configure() method to initialize the child device and
> > set the DMA-mask here instead of the platform driver.
> 

> Apologies, I've been busy and this series got buried in my inbox before I'd
> clocked it as something I was supposed to be looking at.

No worries. I'm glad you responded.

> 
> > @Vinoud, @Manivannan I had to drop your tags from this patch since its
> > content had been significantly changed.
> > 
> > -Sergey
> > 
> > > 
> > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> > > 
> > > ---
> > > 
> > > Changelog v2:
> > > - Fix the comment a bit to being clearer. (@Manivannan)
> > > 
> > > Changelog v3:
> > > - Conditionally set dchan->dev->device.dma_coherent field since it can
> > >    be missing on some platforms. (@Manivannan)
> > > - Remove Manivannan' rb and tb tags since the patch content has been
> > >    changed.
> > > 
> > > Changelog v6:
> > > - Directly call *_dma_configure() method on the child device used for
> > >    the DMA buffers mapping. (@Robin)
> > > - Explicitly set the DMA-mask of the child device in the channel
> > >    allocation proecedure. (@Robin)
> > > - Drop @Manivannan and @Vinod rb- and ab-tags due to significant patch
> > >    content change.
> > > ---
> > >   drivers/dma/dw-edma/dw-edma-core.c | 44 ++++++++++++++++++++++++++++++
> > >   1 file changed, 44 insertions(+)
> > > 
> > > diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
> > > index e3671bfbe186..846518509753 100644
> > > --- a/drivers/dma/dw-edma/dw-edma-core.c
> > > +++ b/drivers/dma/dw-edma/dw-edma-core.c
> > > @@ -6,9 +6,11 @@
> > >    * Author: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
> > >    */
> > > +#include <linux/acpi.h>
> > >   #include <linux/module.h>
> > >   #include <linux/device.h>
> > >   #include <linux/kernel.h>
> > > +#include <linux/of_device.h>
> > >   #include <linux/dmaengine.h>
> > >   #include <linux/err.h>
> > >   #include <linux/interrupt.h>
> > > @@ -711,10 +713,52 @@ static irqreturn_t dw_edma_interrupt_common(int irq, void *data)
> > >   static int dw_edma_alloc_chan_resources(struct dma_chan *dchan)
> > >   {
> > >   	struct dw_edma_chan *chan = dchan2dw_edma_chan(dchan);
> > > +	struct device *dev = chan->dw->chip->dev;
> > > +	int ret;
> > >   	if (chan->status != EDMA_ST_IDLE)
> > >   		return -EBUSY;
> > > +	/* Bypass the dma-ranges based memory regions mapping for the eDMA
> > > +	 * controlled from the CPU/Application side since in that case
> > > +	 * the local memory address is left untranslated.
> > > +	 */
> > > +	if (chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL) {


> > > +		ret = dma_coerce_mask_and_coherent(&dchan->dev->device,
> > > +						   DMA_BIT_MASK(64));
> > > +		if (ret) {
> 
> Setting a 64-bit mask should never fail, especially on any platform that
> will actually run this code.
> 
> > > +			ret = dma_coerce_mask_and_coherent(&dchan->dev->device,
> > > +							   DMA_BIT_MASK(32));

Indeed. I can just drop the 32-bit mask test then. (But I'd retain the
error check anyway.)

The problem is that actual device DMA-addressing capability is
determined by the MASTER_BUS_ADDR_WIDTH IP-core synthesize parameter.
I can't predict its value from this generic code since it isn't
auto-detectable and is platform-specific. That's why back then in
our discussion I was insisting on setting the mask in the low-level
device drivers. But after the commit 423511ec23e2 ("PCI: dwc: Drop
dependency on ZONE_DMA32") it turned to be pointless now since the
DMA-mask would be overwritten by the generic DW PCIe driver code anyway.
What do you suggest then in this regard? Just keep setting the 64-bit
mask only? This will work for my platform, but will fail for the
devices with AXI-bus address of only 32-bits width.

> > > +			if (ret)
> > > +				return ret;
> > > +		}
> > > +
> > > +		if (dev_of_node(dev)) {
> > > +			struct device_node *node = dev_of_node(dev);
> > > +
> > > +			ret = of_dma_configure(&dchan->dev->device, node, true);
> > > +		} else if (has_acpi_companion(dev)) {
> 

> Can this can ever happen? AFAICS there's no ACPI binding to match and probe
> the DWC driver, at best it could only probe as a standard PNP0A08 host
> bridge which wouldn't know anything about eDMA anyway.

There are several ACPI-based platforms with DW PCIe controllers:
pcie-tegra194-acpi.c, pcie-al.c, pcie-hisi.c. All of them are fully
ECAM-based so no DW eDMA probing from the Linux kernel implied. But
these are still DW PCIe controllers and they or some other ones can
have eDMA embedded. Do you think it won't be ever possible to either
directly handle these controllers (bypassing the ECAM interface) or
have a DW PCIe device accessed via the ACPI bindings?

Note basically what I've implemented here was based on the
platform_dma_configure() DMA-configuration code pattern. I thought it
was a reasonable choice since this code path is executed for the
platform devices only (implied by the DW_EDMA_CHIP_LOCAL flag
semantic).

On the second thought if the problem in subject is only specific to
the DT-based platforms, then I could just skip channel device
initialization here for the platform devices with no OF-node detected.
So the question is is it specific to the DT-based platforms only?

(Before answering to the question above please read the last comment
in this message.)

> 
> > > +			struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
> > > +
> > > +			ret = acpi_dma_configure(&dchan->dev->device,
> > > +						 acpi_get_dma_attr(adev));
> > > +		} else {
> > > +			ret = -EINVAL;
> > > +		}
> > > +
> > > +		if (ret)
> > > +			return ret;
> > > +
> > > +		if (dchan->dev->device.dma_range_map) {
> > > +			kfree(dchan->dev->device.dma_range_map);
> > > +			dchan->dev->device.dma_range_map = NULL;
> > > +		}
> 

> Ugh, I guess this is still here because now you're passing the channel
> device to of_dma_configure() such that it looks like a PCI child :(

No. It's still here because I successfully missed your email in my
work inbox so I thought you didn't fix that dma-ranges peculiarity of
the PCIe-host nodes.(

> 
> Can we just set "chan->dev->device.of_node = dev->of_node;" beforehand so it
> works as expected (with f1ad5338a4d5 in place) and we don't need to be
> messing with the dma_range_map details at all? Note that that isn't as hacky
> as it might sound - it's a relatively well-established practice in places
> like I2C and SPI, and in this case it seems perfectly appropriate
> semantically as well.

Of course we can. But now, thanks to your commit f1ad5338a4d5 ("of:
Fix "dma-ranges" handling for bus controllers"), there is no point in
any dma-ranges hack here because the dma-ranges property is no longer
parsed for the PCIe-host platform device. I can and will just drop the
custom DMA-channel device initialization from the patch. The only
issue left to solve is about setting the DMA-mask. Please see my notes
above regarding that problem.

-Serge(y)

> 
> (And there should be no need to bother with of_node refcounting, since the
> lifetime of the eDMA driver is bounded by the lifetime of the PCIe driver,
> thus the lifetime of the DMA channel devices is bounded by the lifetime of
> the PCIe platform device, which already holds a reference from
> of_device_alloc().)
> 
> Thanks,
> Robin.
> 
> > > +
> > > +		dchan->dev->chan_dma_dev = true;
> > > +	} else {
> > > +		dchan->dev->chan_dma_dev = false;
> > > +	}
> > > +
> > >   	return 0;
> > >   }
> > > -- 
> > > 2.38.0
> > > 
> > >
Serge Semin Nov. 30, 2022, 12:15 a.m. UTC | #4
Robin,
Could you give your comments regarding the DMA-mask issue described
below? It would be great to resubmit a fixed revision of the series
on this week in order to make it possible to merge it into the kernel
on the next merge window.

-Sergey

On Sun, Nov 27, 2022 at 02:45:13AM +0300, Serge Semin wrote:
> On Fri, Nov 25, 2022 at 03:32:23PM +0000, Robin Murphy wrote:
> > On 2022-11-07 21:11, Serge Semin wrote:
> > > On Tue, Nov 08, 2022 at 12:04:36AM +0300, Serge Semin wrote:
> > > > DW eDMA doesn't perform any translation of the traffic generated on the
> > > > CPU/Application side. It just generates read/write AXI-bus requests with
> > > > the specified addresses. But in case if the dma-ranges DT-property is
> > > > specified for a platform device node, Linux will use it to create a
> > > > mapping the PCIe-bus regions into the CPU memory ranges. This isn't what
> > > > we want for the eDMA embedded into the locally accessed DW PCIe Root Port
> > > > and End-point. In order to work that around let's set the chan_dma_dev
> > > > flag for each DW eDMA channel thus forcing the client drivers to getting a
> > > > custom dma-ranges-less parental device for the mappings.
> > > > 
> > > > Note it will only work for the client drivers using the
> > > > dmaengine_get_dma_device() method to get the parental DMA device.
> > > 
> > > @Robin, we particularly need you opinion on this patch. I did as you
> > > said: call *_dma_configure() method to initialize the child device and
> > > set the DMA-mask here instead of the platform driver.
> > 
> 
> > Apologies, I've been busy and this series got buried in my inbox before I'd
> > clocked it as something I was supposed to be looking at.
> 
> No worries. I'm glad you responded.
> 
> > 
> > > @Vinoud, @Manivannan I had to drop your tags from this patch since its
> > > content had been significantly changed.
> > > 
> > > -Sergey
> > > 
> > > > 
> > > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> > > > 
> > > > ---
> > > > 
> > > > Changelog v2:
> > > > - Fix the comment a bit to being clearer. (@Manivannan)
> > > > 
> > > > Changelog v3:
> > > > - Conditionally set dchan->dev->device.dma_coherent field since it can
> > > >    be missing on some platforms. (@Manivannan)
> > > > - Remove Manivannan' rb and tb tags since the patch content has been
> > > >    changed.
> > > > 
> > > > Changelog v6:
> > > > - Directly call *_dma_configure() method on the child device used for
> > > >    the DMA buffers mapping. (@Robin)
> > > > - Explicitly set the DMA-mask of the child device in the channel
> > > >    allocation proecedure. (@Robin)
> > > > - Drop @Manivannan and @Vinod rb- and ab-tags due to significant patch
> > > >    content change.
> > > > ---
> > > >   drivers/dma/dw-edma/dw-edma-core.c | 44 ++++++++++++++++++++++++++++++
> > > >   1 file changed, 44 insertions(+)
> > > > 
> > > > diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
> > > > index e3671bfbe186..846518509753 100644
> > > > --- a/drivers/dma/dw-edma/dw-edma-core.c
> > > > +++ b/drivers/dma/dw-edma/dw-edma-core.c
> > > > @@ -6,9 +6,11 @@
> > > >    * Author: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
> > > >    */
> > > > +#include <linux/acpi.h>
> > > >   #include <linux/module.h>
> > > >   #include <linux/device.h>
> > > >   #include <linux/kernel.h>
> > > > +#include <linux/of_device.h>
> > > >   #include <linux/dmaengine.h>
> > > >   #include <linux/err.h>
> > > >   #include <linux/interrupt.h>
> > > > @@ -711,10 +713,52 @@ static irqreturn_t dw_edma_interrupt_common(int irq, void *data)
> > > >   static int dw_edma_alloc_chan_resources(struct dma_chan *dchan)
> > > >   {
> > > >   	struct dw_edma_chan *chan = dchan2dw_edma_chan(dchan);
> > > > +	struct device *dev = chan->dw->chip->dev;
> > > > +	int ret;
> > > >   	if (chan->status != EDMA_ST_IDLE)
> > > >   		return -EBUSY;
> > > > +	/* Bypass the dma-ranges based memory regions mapping for the eDMA
> > > > +	 * controlled from the CPU/Application side since in that case
> > > > +	 * the local memory address is left untranslated.
> > > > +	 */
> > > > +	if (chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL) {
> 
> 
> > > > +		ret = dma_coerce_mask_and_coherent(&dchan->dev->device,
> > > > +						   DMA_BIT_MASK(64));
> > > > +		if (ret) {
> > 
> > Setting a 64-bit mask should never fail, especially on any platform that
> > will actually run this code.
> > 
> > > > +			ret = dma_coerce_mask_and_coherent(&dchan->dev->device,
> > > > +							   DMA_BIT_MASK(32));
> 
> Indeed. I can just drop the 32-bit mask test then. (But I'd retain the
> error check anyway.)
> 
> The problem is that actual device DMA-addressing capability is
> determined by the MASTER_BUS_ADDR_WIDTH IP-core synthesize parameter.
> I can't predict its value from this generic code since it isn't
> auto-detectable and is platform-specific. That's why back then in
> our discussion I was insisting on setting the mask in the low-level
> device drivers. But after the commit 423511ec23e2 ("PCI: dwc: Drop
> dependency on ZONE_DMA32") it turned to be pointless now since the
> DMA-mask would be overwritten by the generic DW PCIe driver code anyway.
> What do you suggest then in this regard? Just keep setting the 64-bit
> mask only? This will work for my platform, but will fail for the
> devices with AXI-bus address of only 32-bits width.
> 
> > > > +			if (ret)
> > > > +				return ret;
> > > > +		}
> > > > +
> > > > +		if (dev_of_node(dev)) {
> > > > +			struct device_node *node = dev_of_node(dev);
> > > > +
> > > > +			ret = of_dma_configure(&dchan->dev->device, node, true);
> > > > +		} else if (has_acpi_companion(dev)) {
> > 
> 
> > Can this can ever happen? AFAICS there's no ACPI binding to match and probe
> > the DWC driver, at best it could only probe as a standard PNP0A08 host
> > bridge which wouldn't know anything about eDMA anyway.
> 
> There are several ACPI-based platforms with DW PCIe controllers:
> pcie-tegra194-acpi.c, pcie-al.c, pcie-hisi.c. All of them are fully
> ECAM-based so no DW eDMA probing from the Linux kernel implied. But
> these are still DW PCIe controllers and they or some other ones can
> have eDMA embedded. Do you think it won't be ever possible to either
> directly handle these controllers (bypassing the ECAM interface) or
> have a DW PCIe device accessed via the ACPI bindings?
> 
> Note basically what I've implemented here was based on the
> platform_dma_configure() DMA-configuration code pattern. I thought it
> was a reasonable choice since this code path is executed for the
> platform devices only (implied by the DW_EDMA_CHIP_LOCAL flag
> semantic).
> 
> On the second thought if the problem in subject is only specific to
> the DT-based platforms, then I could just skip channel device
> initialization here for the platform devices with no OF-node detected.
> So the question is is it specific to the DT-based platforms only?
> 
> (Before answering to the question above please read the last comment
> in this message.)
> 
> > 
> > > > +			struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
> > > > +
> > > > +			ret = acpi_dma_configure(&dchan->dev->device,
> > > > +						 acpi_get_dma_attr(adev));
> > > > +		} else {
> > > > +			ret = -EINVAL;
> > > > +		}
> > > > +
> > > > +		if (ret)
> > > > +			return ret;
> > > > +
> > > > +		if (dchan->dev->device.dma_range_map) {
> > > > +			kfree(dchan->dev->device.dma_range_map);
> > > > +			dchan->dev->device.dma_range_map = NULL;
> > > > +		}
> > 
> 
> > Ugh, I guess this is still here because now you're passing the channel
> > device to of_dma_configure() such that it looks like a PCI child :(
> 
> No. It's still here because I successfully missed your email in my
> work inbox so I thought you didn't fix that dma-ranges peculiarity of
> the PCIe-host nodes.(
> 
> > 
> > Can we just set "chan->dev->device.of_node = dev->of_node;" beforehand so it
> > works as expected (with f1ad5338a4d5 in place) and we don't need to be
> > messing with the dma_range_map details at all? Note that that isn't as hacky
> > as it might sound - it's a relatively well-established practice in places
> > like I2C and SPI, and in this case it seems perfectly appropriate
> > semantically as well.
> 
> Of course we can. But now, thanks to your commit f1ad5338a4d5 ("of:
> Fix "dma-ranges" handling for bus controllers"), there is no point in
> any dma-ranges hack here because the dma-ranges property is no longer
> parsed for the PCIe-host platform device. I can and will just drop the
> custom DMA-channel device initialization from the patch. The only
> issue left to solve is about setting the DMA-mask. Please see my notes
> above regarding that problem.
> 
> -Serge(y)
> 
> > 
> > (And there should be no need to bother with of_node refcounting, since the
> > lifetime of the eDMA driver is bounded by the lifetime of the PCIe driver,
> > thus the lifetime of the DMA channel devices is bounded by the lifetime of
> > the PCIe platform device, which already holds a reference from
> > of_device_alloc().)
> > 
> > Thanks,
> > Robin.
> > 
> > > > +
> > > > +		dchan->dev->chan_dma_dev = true;
> > > > +	} else {
> > > > +		dchan->dev->chan_dma_dev = false;
> > > > +	}
> > > > +
> > > >   	return 0;
> > > >   }
> > > > -- 
> > > > 2.38.0
> > > > 
> > > >
Robin Murphy Dec. 1, 2022, 11:52 a.m. UTC | #5
On 2022-11-26 23:45, Serge Semin wrote:
> On Fri, Nov 25, 2022 at 03:32:23PM +0000, Robin Murphy wrote:
>> On 2022-11-07 21:11, Serge Semin wrote:
>>> On Tue, Nov 08, 2022 at 12:04:36AM +0300, Serge Semin wrote:
>>>> DW eDMA doesn't perform any translation of the traffic generated on the
>>>> CPU/Application side. It just generates read/write AXI-bus requests with
>>>> the specified addresses. But in case if the dma-ranges DT-property is
>>>> specified for a platform device node, Linux will use it to create a
>>>> mapping the PCIe-bus regions into the CPU memory ranges. This isn't what
>>>> we want for the eDMA embedded into the locally accessed DW PCIe Root Port
>>>> and End-point. In order to work that around let's set the chan_dma_dev
>>>> flag for each DW eDMA channel thus forcing the client drivers to getting a
>>>> custom dma-ranges-less parental device for the mappings.
>>>>
>>>> Note it will only work for the client drivers using the
>>>> dmaengine_get_dma_device() method to get the parental DMA device.
>>>
>>> @Robin, we particularly need you opinion on this patch. I did as you
>>> said: call *_dma_configure() method to initialize the child device and
>>> set the DMA-mask here instead of the platform driver.
>>
> 
>> Apologies, I've been busy and this series got buried in my inbox before I'd
>> clocked it as something I was supposed to be looking at.
> 
> No worries. I'm glad you responded.
> 
>>
>>> @Vinoud, @Manivannan I had to drop your tags from this patch since its
>>> content had been significantly changed.
>>>
>>> -Sergey
>>>
>>>>
>>>> Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
>>>>
>>>> ---
>>>>
>>>> Changelog v2:
>>>> - Fix the comment a bit to being clearer. (@Manivannan)
>>>>
>>>> Changelog v3:
>>>> - Conditionally set dchan->dev->device.dma_coherent field since it can
>>>>     be missing on some platforms. (@Manivannan)
>>>> - Remove Manivannan' rb and tb tags since the patch content has been
>>>>     changed.
>>>>
>>>> Changelog v6:
>>>> - Directly call *_dma_configure() method on the child device used for
>>>>     the DMA buffers mapping. (@Robin)
>>>> - Explicitly set the DMA-mask of the child device in the channel
>>>>     allocation proecedure. (@Robin)
>>>> - Drop @Manivannan and @Vinod rb- and ab-tags due to significant patch
>>>>     content change.
>>>> ---
>>>>    drivers/dma/dw-edma/dw-edma-core.c | 44 ++++++++++++++++++++++++++++++
>>>>    1 file changed, 44 insertions(+)
>>>>
>>>> diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
>>>> index e3671bfbe186..846518509753 100644
>>>> --- a/drivers/dma/dw-edma/dw-edma-core.c
>>>> +++ b/drivers/dma/dw-edma/dw-edma-core.c
>>>> @@ -6,9 +6,11 @@
>>>>     * Author: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
>>>>     */
>>>> +#include <linux/acpi.h>
>>>>    #include <linux/module.h>
>>>>    #include <linux/device.h>
>>>>    #include <linux/kernel.h>
>>>> +#include <linux/of_device.h>
>>>>    #include <linux/dmaengine.h>
>>>>    #include <linux/err.h>
>>>>    #include <linux/interrupt.h>
>>>> @@ -711,10 +713,52 @@ static irqreturn_t dw_edma_interrupt_common(int irq, void *data)
>>>>    static int dw_edma_alloc_chan_resources(struct dma_chan *dchan)
>>>>    {
>>>>    	struct dw_edma_chan *chan = dchan2dw_edma_chan(dchan);
>>>> +	struct device *dev = chan->dw->chip->dev;
>>>> +	int ret;
>>>>    	if (chan->status != EDMA_ST_IDLE)
>>>>    		return -EBUSY;
>>>> +	/* Bypass the dma-ranges based memory regions mapping for the eDMA
>>>> +	 * controlled from the CPU/Application side since in that case
>>>> +	 * the local memory address is left untranslated.
>>>> +	 */
>>>> +	if (chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL) {
> 
> 
>>>> +		ret = dma_coerce_mask_and_coherent(&dchan->dev->device,
>>>> +						   DMA_BIT_MASK(64));
>>>> +		if (ret) {
>>
>> Setting a 64-bit mask should never fail, especially on any platform that
>> will actually run this code.
>>
>>>> +			ret = dma_coerce_mask_and_coherent(&dchan->dev->device,
>>>> +							   DMA_BIT_MASK(32));
> 
> Indeed. I can just drop the 32-bit mask test then. (But I'd retain the
> error check anyway.)
> 
> The problem is that actual device DMA-addressing capability is
> determined by the MASTER_BUS_ADDR_WIDTH IP-core synthesize parameter.
> I can't predict its value from this generic code since it isn't
> auto-detectable and is platform-specific. That's why back then in
> our discussion I was insisting on setting the mask in the low-level
> device drivers. But after the commit 423511ec23e2 ("PCI: dwc: Drop
> dependency on ZONE_DMA32") it turned to be pointless now since the
> DMA-mask would be overwritten by the generic DW PCIe driver code anyway.
> What do you suggest then in this regard? Just keep setting the 64-bit
> mask only? This will work for my platform, but will fail for the
> devices with AXI-bus address of only 32-bits width.

OK, but you already have that problem either way. The point of 
dma_set_mask() et al is to inform the DMA API of your device's 
capability - setting a 64-bit mask is saying "I can use 64-bit addresses 
if you can" to the DMA layer, and as I say the DMA layer is almost 
always going to respond "indeed I can, let's do that". If the real DMA 
mask is platform-specific then you need to pass a platform-specific 
value here.

>>>> +			if (ret)
>>>> +				return ret;
>>>> +		}
>>>> +
>>>> +		if (dev_of_node(dev)) {
>>>> +			struct device_node *node = dev_of_node(dev);
>>>> +
>>>> +			ret = of_dma_configure(&dchan->dev->device, node, true);
>>>> +		} else if (has_acpi_companion(dev)) {
>>
> 
>> Can this can ever happen? AFAICS there's no ACPI binding to match and probe
>> the DWC driver, at best it could only probe as a standard PNP0A08 host
>> bridge which wouldn't know anything about eDMA anyway.
> 
> There are several ACPI-based platforms with DW PCIe controllers:
> pcie-tegra194-acpi.c, pcie-al.c, pcie-hisi.c. All of them are fully
> ECAM-based so no DW eDMA probing from the Linux kernel implied. But
> these are still DW PCIe controllers and they or some other ones can
> have eDMA embedded. Do you think it won't be ever possible to either
> directly handle these controllers (bypassing the ECAM interface) or
> have a DW PCIe device accessed via the ACPI bindings?

It's not entirely impossible, but would require new ACPI bindings and 
code changes to the dw-pci driver, so if somebody ever did do that work 
they should be responsible for any required changes at this end as well. 
There's no point adding untested dead code now, to maintain indefinitely 
just for the theoretical possibility that someone might ever make it 
reachable.

> Note basically what I've implemented here was based on the
> platform_dma_configure() DMA-configuration code pattern. I thought it
> was a reasonable choice since this code path is executed for the
> platform devices only (implied by the DW_EDMA_CHIP_LOCAL flag
> semantic).
> 
> On the second thought if the problem in subject is only specific to
> the DT-based platforms, then I could just skip channel device
> initialization here for the platform devices with no OF-node detected.
> So the question is is it specific to the DT-based platforms only?

I think you still want the DW_EDMA_CHIP_LOCAL flag, since the PCI 
endpoint device in the dw-edma-pcie case may have an of_node on some 
platforms, and in that case overriding the chan_dma_dev setup would be 
wrong. When the flag is set, though, we can simply assume dev_of_node() 
is valid since it's the only possible way for that to happen (and if 
someone does ever break that assumption in future, it will likely make 
itself noticed).

> (Before answering to the question above please read the last comment
> in this message.)
> 
>>
>>>> +			struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
>>>> +
>>>> +			ret = acpi_dma_configure(&dchan->dev->device,
>>>> +						 acpi_get_dma_attr(adev));
>>>> +		} else {
>>>> +			ret = -EINVAL;
>>>> +		}
>>>> +
>>>> +		if (ret)
>>>> +			return ret;
>>>> +
>>>> +		if (dchan->dev->device.dma_range_map) {
>>>> +			kfree(dchan->dev->device.dma_range_map);
>>>> +			dchan->dev->device.dma_range_map = NULL;
>>>> +		}
>>
> 
>> Ugh, I guess this is still here because now you're passing the channel
>> device to of_dma_configure() such that it looks like a PCI child :(
> 
> No. It's still here because I successfully missed your email in my
> work inbox so I thought you didn't fix that dma-ranges peculiarity of
> the PCIe-host nodes.(
> 
>>
>> Can we just set "chan->dev->device.of_node = dev->of_node;" beforehand so it
>> works as expected (with f1ad5338a4d5 in place) and we don't need to be
>> messing with the dma_range_map details at all? Note that that isn't as hacky
>> as it might sound - it's a relatively well-established practice in places
>> like I2C and SPI, and in this case it seems perfectly appropriate
>> semantically as well.
> 
> Of course we can. But now, thanks to your commit f1ad5338a4d5 ("of:
> Fix "dma-ranges" handling for bus controllers"), there is no point in
> any dma-ranges hack here because the dma-ranges property is no longer
> parsed for the PCIe-host platform device. I can and will just drop the
> custom DMA-channel device initialization from the patch. The only
> issue left to solve is about setting the DMA-mask. Please see my notes
> above regarding that problem.

Ah, I assumed you'd still want to keep the chan_dma_dev setup for the 
sake of independent DMA masks, at least until we get a better solution 
for the MSI stuff. If you're happy with the compromise of going back to 
using the real host device to keep things simple, that's fine by me.

Thanks,
Robin.
Serge Semin Dec. 11, 2022, 5:33 p.m. UTC | #6
On Thu, Dec 01, 2022 at 11:52:19AM +0000, Robin Murphy wrote:
> On 2022-11-26 23:45, Serge Semin wrote:
> > On Fri, Nov 25, 2022 at 03:32:23PM +0000, Robin Murphy wrote:
> > > On 2022-11-07 21:11, Serge Semin wrote:
> > > > On Tue, Nov 08, 2022 at 12:04:36AM +0300, Serge Semin wrote:
> > > > > DW eDMA doesn't perform any translation of the traffic generated on the
> > > > > CPU/Application side. It just generates read/write AXI-bus requests with
> > > > > the specified addresses. But in case if the dma-ranges DT-property is
> > > > > specified for a platform device node, Linux will use it to create a
> > > > > mapping the PCIe-bus regions into the CPU memory ranges. This isn't what
> > > > > we want for the eDMA embedded into the locally accessed DW PCIe Root Port
> > > > > and End-point. In order to work that around let's set the chan_dma_dev
> > > > > flag for each DW eDMA channel thus forcing the client drivers to getting a
> > > > > custom dma-ranges-less parental device for the mappings.
> > > > > 
> > > > > Note it will only work for the client drivers using the
> > > > > dmaengine_get_dma_device() method to get the parental DMA device.
> > > > 
> > > > @Robin, we particularly need you opinion on this patch. I did as you
> > > > said: call *_dma_configure() method to initialize the child device and
> > > > set the DMA-mask here instead of the platform driver.
> > > 
> > 
> > > Apologies, I've been busy and this series got buried in my inbox before I'd
> > > clocked it as something I was supposed to be looking at.
> > 
> > No worries. I'm glad you responded.
> > 
> > > 
> > > > @Vinoud, @Manivannan I had to drop your tags from this patch since its
> > > > content had been significantly changed.
> > > > 
> > > > -Sergey
> > > > 
> > > > > 
> > > > > Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
> > > > > 
> > > > > ---
> > > > > 
> > > > > Changelog v2:
> > > > > - Fix the comment a bit to being clearer. (@Manivannan)
> > > > > 
> > > > > Changelog v3:
> > > > > - Conditionally set dchan->dev->device.dma_coherent field since it can
> > > > >     be missing on some platforms. (@Manivannan)
> > > > > - Remove Manivannan' rb and tb tags since the patch content has been
> > > > >     changed.
> > > > > 
> > > > > Changelog v6:
> > > > > - Directly call *_dma_configure() method on the child device used for
> > > > >     the DMA buffers mapping. (@Robin)
> > > > > - Explicitly set the DMA-mask of the child device in the channel
> > > > >     allocation proecedure. (@Robin)
> > > > > - Drop @Manivannan and @Vinod rb- and ab-tags due to significant patch
> > > > >     content change.
> > > > > ---
> > > > >    drivers/dma/dw-edma/dw-edma-core.c | 44 ++++++++++++++++++++++++++++++
> > > > >    1 file changed, 44 insertions(+)
> > > > > 
> > > > > diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
> > > > > index e3671bfbe186..846518509753 100644
> > > > > --- a/drivers/dma/dw-edma/dw-edma-core.c
> > > > > +++ b/drivers/dma/dw-edma/dw-edma-core.c
> > > > > @@ -6,9 +6,11 @@
> > > > >     * Author: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
> > > > >     */
> > > > > +#include <linux/acpi.h>
> > > > >    #include <linux/module.h>
> > > > >    #include <linux/device.h>
> > > > >    #include <linux/kernel.h>
> > > > > +#include <linux/of_device.h>
> > > > >    #include <linux/dmaengine.h>
> > > > >    #include <linux/err.h>
> > > > >    #include <linux/interrupt.h>
> > > > > @@ -711,10 +713,52 @@ static irqreturn_t dw_edma_interrupt_common(int irq, void *data)
> > > > >    static int dw_edma_alloc_chan_resources(struct dma_chan *dchan)
> > > > >    {
> > > > >    	struct dw_edma_chan *chan = dchan2dw_edma_chan(dchan);
> > > > > +	struct device *dev = chan->dw->chip->dev;
> > > > > +	int ret;
> > > > >    	if (chan->status != EDMA_ST_IDLE)
> > > > >    		return -EBUSY;
> > > > > +	/* Bypass the dma-ranges based memory regions mapping for the eDMA
> > > > > +	 * controlled from the CPU/Application side since in that case
> > > > > +	 * the local memory address is left untranslated.
> > > > > +	 */
> > > > > +	if (chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL) {
> > 
> > 
> > > > > +		ret = dma_coerce_mask_and_coherent(&dchan->dev->device,
> > > > > +						   DMA_BIT_MASK(64));
> > > > > +		if (ret) {
> > > 
> > > Setting a 64-bit mask should never fail, especially on any platform that
> > > will actually run this code.
> > > 
> > > > > +			ret = dma_coerce_mask_and_coherent(&dchan->dev->device,
> > > > > +							   DMA_BIT_MASK(32));
> > 
> > Indeed. I can just drop the 32-bit mask test then. (But I'd retain the
> > error check anyway.)
> > 
> > The problem is that actual device DMA-addressing capability is
> > determined by the MASTER_BUS_ADDR_WIDTH IP-core synthesize parameter.
> > I can't predict its value from this generic code since it isn't
> > auto-detectable and is platform-specific. That's why back then in
> > our discussion I was insisting on setting the mask in the low-level
> > device drivers. But after the commit 423511ec23e2 ("PCI: dwc: Drop
> > dependency on ZONE_DMA32") it turned to be pointless now since the
> > DMA-mask would be overwritten by the generic DW PCIe driver code anyway.
> > What do you suggest then in this regard? Just keep setting the 64-bit
> > mask only? This will work for my platform, but will fail for the
> > devices with AXI-bus address of only 32-bits width.
> 
> OK, but you already have that problem either way. The point of
> dma_set_mask() et al is to inform the DMA API of your device's capability -
> setting a 64-bit mask is saying "I can use 64-bit addresses if you can" to
> the DMA layer, and as I say the DMA layer is almost always going to respond
> "indeed I can, let's do that". If the real DMA mask is platform-specific
> then you need to pass a platform-specific value here.
> 
> > > > > +			if (ret)
> > > > > +				return ret;
> > > > > +		}
> > > > > +
> > > > > +		if (dev_of_node(dev)) {
> > > > > +			struct device_node *node = dev_of_node(dev);
> > > > > +
> > > > > +			ret = of_dma_configure(&dchan->dev->device, node, true);
> > > > > +		} else if (has_acpi_companion(dev)) {
> > > 
> > 
> > > Can this can ever happen? AFAICS there's no ACPI binding to match and probe
> > > the DWC driver, at best it could only probe as a standard PNP0A08 host
> > > bridge which wouldn't know anything about eDMA anyway.
> > 
> > There are several ACPI-based platforms with DW PCIe controllers:
> > pcie-tegra194-acpi.c, pcie-al.c, pcie-hisi.c. All of them are fully
> > ECAM-based so no DW eDMA probing from the Linux kernel implied. But
> > these are still DW PCIe controllers and they or some other ones can
> > have eDMA embedded. Do you think it won't be ever possible to either
> > directly handle these controllers (bypassing the ECAM interface) or
> > have a DW PCIe device accessed via the ACPI bindings?
> 
> It's not entirely impossible, but would require new ACPI bindings and code
> changes to the dw-pci driver, so if somebody ever did do that work they
> should be responsible for any required changes at this end as well. There's
> no point adding untested dead code now, to maintain indefinitely just for
> the theoretical possibility that someone might ever make it reachable.
> 
> > Note basically what I've implemented here was based on the
> > platform_dma_configure() DMA-configuration code pattern. I thought it
> > was a reasonable choice since this code path is executed for the
> > platform devices only (implied by the DW_EDMA_CHIP_LOCAL flag
> > semantic).
> > 
> > On the second thought if the problem in subject is only specific to
> > the DT-based platforms, then I could just skip channel device
> > initialization here for the platform devices with no OF-node detected.
> > So the question is is it specific to the DT-based platforms only?
> 
> I think you still want the DW_EDMA_CHIP_LOCAL flag, since the PCI endpoint
> device in the dw-edma-pcie case may have an of_node on some platforms, and
> in that case overriding the chan_dma_dev setup would be wrong. When the flag
> is set, though, we can simply assume dev_of_node() is valid since it's the
> only possible way for that to happen (and if someone does ever break that
> assumption in future, it will likely make itself noticed).
> 
> > (Before answering to the question above please read the last comment
> > in this message.)
> > 
> > > 
> > > > > +			struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
> > > > > +
> > > > > +			ret = acpi_dma_configure(&dchan->dev->device,
> > > > > +						 acpi_get_dma_attr(adev));
> > > > > +		} else {
> > > > > +			ret = -EINVAL;
> > > > > +		}
> > > > > +
> > > > > +		if (ret)
> > > > > +			return ret;
> > > > > +
> > > > > +		if (dchan->dev->device.dma_range_map) {
> > > > > +			kfree(dchan->dev->device.dma_range_map);
> > > > > +			dchan->dev->device.dma_range_map = NULL;
> > > > > +		}
> > > 
> > 
> > > Ugh, I guess this is still here because now you're passing the channel
> > > device to of_dma_configure() such that it looks like a PCI child :(
> > 
> > No. It's still here because I successfully missed your email in my
> > work inbox so I thought you didn't fix that dma-ranges peculiarity of
> > the PCIe-host nodes.(
> > 
> > > 
> > > Can we just set "chan->dev->device.of_node = dev->of_node;" beforehand so it
> > > works as expected (with f1ad5338a4d5 in place) and we don't need to be
> > > messing with the dma_range_map details at all? Note that that isn't as hacky
> > > as it might sound - it's a relatively well-established practice in places
> > > like I2C and SPI, and in this case it seems perfectly appropriate
> > > semantically as well.
> > 
> > Of course we can. But now, thanks to your commit f1ad5338a4d5 ("of:
> > Fix "dma-ranges" handling for bus controllers"), there is no point in
> > any dma-ranges hack here because the dma-ranges property is no longer
> > parsed for the PCIe-host platform device. I can and will just drop the
> > custom DMA-channel device initialization from the patch. The only
> > issue left to solve is about setting the DMA-mask. Please see my notes
> > above regarding that problem.
> 

> Ah, I assumed you'd still want to keep the chan_dma_dev setup for the sake
> of independent DMA masks, at least until we get a better solution for the
> MSI stuff. If you're happy with the compromise of going back to using the
> real host device to keep things simple, that's fine by me.

My biggest concern was connected with the 'dma-ranges' problem. The
DMA-mask thing was another issue, but since the eDMA setup is executed
after the MSI setup we can just override the mask specified by the
later procedure. Though I'll have to add some loud comment regarding
that implicit order requirement.

In anyway thanks for your fix. I'll resubmit the series with the
DMA-mask overridden in the dw_edma_probe() method. The mask will be
calculated based on an additional flag specified in the
dw_edma_chip.flags field. It seems like the best solution at this
stage.

-Serge(y)

> 
> Thanks,
> Robin.
diff mbox series

Patch

diff --git a/drivers/dma/dw-edma/dw-edma-core.c b/drivers/dma/dw-edma/dw-edma-core.c
index e3671bfbe186..846518509753 100644
--- a/drivers/dma/dw-edma/dw-edma-core.c
+++ b/drivers/dma/dw-edma/dw-edma-core.c
@@ -6,9 +6,11 @@ 
  * Author: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
  */
 
+#include <linux/acpi.h>
 #include <linux/module.h>
 #include <linux/device.h>
 #include <linux/kernel.h>
+#include <linux/of_device.h>
 #include <linux/dmaengine.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
@@ -711,10 +713,52 @@  static irqreturn_t dw_edma_interrupt_common(int irq, void *data)
 static int dw_edma_alloc_chan_resources(struct dma_chan *dchan)
 {
 	struct dw_edma_chan *chan = dchan2dw_edma_chan(dchan);
+	struct device *dev = chan->dw->chip->dev;
+	int ret;
 
 	if (chan->status != EDMA_ST_IDLE)
 		return -EBUSY;
 
+	/* Bypass the dma-ranges based memory regions mapping for the eDMA
+	 * controlled from the CPU/Application side since in that case
+	 * the local memory address is left untranslated.
+	 */
+	if (chan->dw->chip->flags & DW_EDMA_CHIP_LOCAL) {
+		ret = dma_coerce_mask_and_coherent(&dchan->dev->device,
+						   DMA_BIT_MASK(64));
+		if (ret) {
+			ret = dma_coerce_mask_and_coherent(&dchan->dev->device,
+							   DMA_BIT_MASK(32));
+			if (ret)
+				return ret;
+		}
+
+		if (dev_of_node(dev)) {
+			struct device_node *node = dev_of_node(dev);
+
+			ret = of_dma_configure(&dchan->dev->device, node, true);
+		} else if (has_acpi_companion(dev)) {
+			struct acpi_device *adev = to_acpi_device_node(dev->fwnode);
+
+			ret = acpi_dma_configure(&dchan->dev->device,
+						 acpi_get_dma_attr(adev));
+		} else {
+			ret = -EINVAL;
+		}
+
+		if (ret)
+			return ret;
+
+		if (dchan->dev->device.dma_range_map) {
+			kfree(dchan->dev->device.dma_range_map);
+			dchan->dev->device.dma_range_map = NULL;
+		}
+
+		dchan->dev->chan_dma_dev = true;
+	} else {
+		dchan->dev->chan_dma_dev = false;
+	}
+
 	return 0;
 }