diff mbox series

[V5,6/6] PCI: qcom: Add support for IPQ9574

Message ID 20240512082858.1806694-7-quic_devipriy@quicinc.com (mailing list archive)
State New
Delegated to: Krzysztof Wilczyński
Headers show
Series Add PCIe support for IPQ9574 | expand

Commit Message

Devi Priya May 12, 2024, 8:28 a.m. UTC 
The IPQ9574 platform has 4 Gen3 PCIe controllers:
two single-lane and two dual-lane based on SNPS core 5.70a

The Qcom IP rev is 1.27.0 and Synopsys IP rev is 5.80a
Added a new compatible 'qcom,pcie-ipq9574' and 'ops_1_27_0'
which reuses all the members of 'ops_2_9_0' except for the post_init
as the SLV_ADDR_SPACE_SIZE configuration differs between 2_9_0
and 1_27_0.

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Manivannan Sadhasivam <mani@kernel.org>
Co-developed-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: Anusha Rao <quic_anusha@quicinc.com>
Signed-off-by: devi priya <quic_devipriy@quicinc.com>
---
 Changes in V5:
	- Rebased on top of the below series which adds support for fetching
	  clocks from the device tree
	  https://lore.kernel.org/linux-pci/20240417-pci-qcom-clk-bulk-v1-1-52ca19b3d6b2@linaro.org/

 drivers/pci/controller/dwc/pcie-qcom.c | 36 +++++++++++++++++++++++---
 1 file changed, 32 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
index 3d2eeff9a876..af36a29c092e 100644
--- a/drivers/pci/controller/dwc/pcie-qcom.c
+++ b/drivers/pci/controller/dwc/pcie-qcom.c
@@ -106,6 +106,7 @@ 
 
 /* PARF_SLV_ADDR_SPACE_SIZE register value */
 #define SLV_ADDR_SPACE_SZ			0x10000000
+#define SLV_ADDR_SPACE_SZ_1_27_0		0x08000000
 
 /* PARF_MHI_CLOCK_RESET_CTRL register fields */
 #define AHB_CLK_EN				BIT(0)
@@ -1095,16 +1096,13 @@  static int qcom_pcie_init_2_9_0(struct qcom_pcie *pcie)
 	return clk_bulk_prepare_enable(res->num_clks, res->clks);
 }
 
-static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
+static int qcom_pcie_post_init(struct qcom_pcie *pcie)
 {
 	struct dw_pcie *pci = pcie->pci;
 	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
 	u32 val;
 	int i;
 
-	writel(SLV_ADDR_SPACE_SZ,
-		pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
-
 	val = readl(pcie->parf + PARF_PHY_CTRL);
 	val &= ~PHY_TEST_PWR_DOWN;
 	writel(val, pcie->parf + PARF_PHY_CTRL);
@@ -1144,6 +1142,22 @@  static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
 	return 0;
 }
 
+static int qcom_pcie_post_init_1_27_0(struct qcom_pcie *pcie)
+{
+	writel(SLV_ADDR_SPACE_SZ_1_27_0,
+	       pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
+
+	return qcom_pcie_post_init(pcie);
+}
+
+static int qcom_pcie_post_init_2_9_0(struct qcom_pcie *pcie)
+{
+	writel(SLV_ADDR_SPACE_SZ,
+	       pcie->parf + PARF_SLV_ADDR_SPACE_SIZE);
+
+	return qcom_pcie_post_init(pcie);
+}
+
 static int qcom_pcie_link_up(struct dw_pcie *pci)
 {
 	u16 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
@@ -1297,6 +1311,15 @@  static const struct qcom_pcie_ops ops_2_9_0 = {
 	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
 };
 
+/* Qcom IP rev.: 1.27.0  Synopsys IP rev.: 5.80a */
+static const struct qcom_pcie_ops ops_1_27_0 = {
+	.get_resources = qcom_pcie_get_resources_2_9_0,
+	.init = qcom_pcie_init_2_9_0,
+	.post_init = qcom_pcie_post_init_1_27_0,
+	.deinit = qcom_pcie_deinit_2_9_0,
+	.ltssm_enable = qcom_pcie_2_3_2_ltssm_enable,
+};
+
 static const struct qcom_pcie_cfg cfg_1_0_0 = {
 	.ops = &ops_1_0_0,
 };
@@ -1334,6 +1357,10 @@  static const struct qcom_pcie_cfg cfg_sc8280xp = {
 	.no_l0s = true,
 };
 
+static const struct qcom_pcie_cfg cfg_1_27_0 = {
+	.ops = &ops_1_27_0,
+};
+
 static const struct dw_pcie_ops dw_pcie_ops = {
 	.link_up = qcom_pcie_link_up,
 	.start_link = qcom_pcie_start_link,
@@ -1603,6 +1630,7 @@  static const struct of_device_id qcom_pcie_match[] = {
 	{ .compatible = "qcom,pcie-ipq8064-v2", .data = &cfg_2_1_0 },
 	{ .compatible = "qcom,pcie-ipq8074", .data = &cfg_2_3_3 },
 	{ .compatible = "qcom,pcie-ipq8074-gen3", .data = &cfg_2_9_0 },
+	{ .compatible = "qcom,pcie-ipq9574", .data = &cfg_1_27_0 },
 	{ .compatible = "qcom,pcie-msm8996", .data = &cfg_2_3_2 },
 	{ .compatible = "qcom,pcie-qcs404", .data = &cfg_2_4_0 },
 	{ .compatible = "qcom,pcie-sa8540p", .data = &cfg_sc8280xp },