diff mbox series

[v3,19/25] PCI/DPC: Use RESPONSE_IS_PCI_ERROR() to check read from hardware

Message ID 6e19df51a431da05dbd5577f11dd31d0c2801911.1634825082.git.naveennaidu479@gmail.com (mailing list archive)
State Superseded
Delegated to: Bjorn Helgaas
Headers show
Series Unify PCI error response checking | expand

Commit Message

Naveen Naidu Oct. 21, 2021, 3:07 p.m. UTC
An MMIO read from a PCI device that doesn't exist or doesn't respond
causes a PCI error.  There's no real data to return to satisfy the
CPU read, so most hardware fabricates ~0 data.

Use RESPONSE_IS_PCI_ERROR() to check the response we get when we read
data from hardware.

This helps unify PCI error response checking and make error checks
consistent and easier to find.

Compile tested only.

Signed-off-by: Naveen Naidu <naveennaidu479@gmail.com>
---
 drivers/pci/pcie/dpc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)
diff mbox series

Patch

diff --git a/drivers/pci/pcie/dpc.c b/drivers/pci/pcie/dpc.c
index c556e7beafe3..4a051a096075 100644
--- a/drivers/pci/pcie/dpc.c
+++ b/drivers/pci/pcie/dpc.c
@@ -79,7 +79,7 @@  static bool dpc_completed(struct pci_dev *pdev)
 	u16 status;
 
 	pci_read_config_word(pdev, pdev->dpc_cap + PCI_EXP_DPC_STATUS, &status);
-	if ((status != 0xffff) && (status & PCI_EXP_DPC_STATUS_TRIGGER))
+	if ((!RESPONSE_IS_PCI_ERROR(status)) && (status & PCI_EXP_DPC_STATUS_TRIGGER))
 		return false;
 
 	if (test_bit(PCI_DPC_RECOVERING, &pdev->priv_flags))
@@ -312,7 +312,7 @@  static irqreturn_t dpc_irq(int irq, void *context)
 
 	pci_read_config_word(pdev, cap + PCI_EXP_DPC_STATUS, &status);
 
-	if (!(status & PCI_EXP_DPC_STATUS_INTERRUPT) || status == (u16)(~0))
+	if (!(status & PCI_EXP_DPC_STATUS_INTERRUPT) || RESPONSE_IS_PCI_ERROR(status))
 		return IRQ_NONE;
 
 	pci_write_config_word(pdev, cap + PCI_EXP_DPC_STATUS,