| Message ID | 20230922115116.2748804-4-srichara@win-platform-upstream01.qualcomm.com (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | Daniel Lezcano |
| Headers | show |
| Series | Add support for IPQ5018 tsens | expand |
On Fri, 22 Sept 2023 at 14:51, Sricharan R <srichara@win-platform-upstream01.qualcomm.com> wrote: > > From: Sricharan Ramabadhran <quic_srichara@quicinc.com> > > IPQ5018 has tsens IP V1.0, 4 sensors and 1 interrupt. > The soc does not have a RPM, hence tsens has to be reset and > enabled in the driver init. Adding the driver support for same. > > Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> > --- > [v3] Fixed Dmitry's comments for error checks in init_ipq5018 > > drivers/thermal/qcom/tsens-v1.c | 60 +++++++++++++++++++++++++++++++++ > drivers/thermal/qcom/tsens.c | 3 ++ > drivers/thermal/qcom/tsens.h | 2 +- > 3 files changed, 64 insertions(+), 1 deletion(-) Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
On 22. 09. 2023. 13:51, Sricharan R wrote: > From: Sricharan Ramabadhran <quic_srichara@quicinc.com> > > IPQ5018 has tsens IP V1.0, 4 sensors and 1 interrupt. > The soc does not have a RPM, hence tsens has to be reset and > enabled in the driver init. Adding the driver support for same. > > Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> > --- > [v3] Fixed Dmitry's comments for error checks in init_ipq5018 > > drivers/thermal/qcom/tsens-v1.c | 60 +++++++++++++++++++++++++++++++++ > drivers/thermal/qcom/tsens.c | 3 ++ > drivers/thermal/qcom/tsens.h | 2 +- > 3 files changed, 64 insertions(+), 1 deletion(-) > > diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c > index dc1c4ae2d8b0..acee2064f83e 100644 > --- a/drivers/thermal/qcom/tsens-v1.c > +++ b/drivers/thermal/qcom/tsens-v1.c > @@ -79,6 +79,18 @@ static struct tsens_features tsens_v1_feat = { > .trip_max_temp = 120000, > }; > > +static struct tsens_features tsens_v1_ipq5018_feat = { > + .ver_major = VER_1_X, > + .crit_int = 0, > + .combo_int = 0, > + .adc = 1, > + .srot_split = 1, > + .max_sensors = 11, > + .trip_min_temp = -40000, > + .trip_max_temp = 120000, > + .ignore_enable = 1, > +}; > + > static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = { > /* ----- SROT ------ */ > /* VERSION */ > @@ -150,6 +162,41 @@ static int __init init_8956(struct tsens_priv *priv) { > return init_common(priv); > } > > +static int init_ipq5018(struct tsens_priv *priv) __init is missing after int, otherwise I get modpost warning while building: WARNING: modpost: vmlinux: section mismatch in reference: init_ipq5018+0x14 (section: .text) -> init_common (section: .init.text) Regards, Robert > +{ > + int ret; > + u32 mask; > + > + ret = init_common(priv); > + if (ret < 0) { > + dev_err(priv->dev, "Init common failed %d\n", ret); > + return ret; > + } > + > + ret = regmap_field_write(priv->rf[TSENS_SW_RST], 1); > + if (ret) { > + dev_err(priv->dev, "Reset failed\n"); > + return ret; > + } > + > + mask = GENMASK(priv->num_sensors, 0); > + ret = regmap_field_update_bits(priv->rf[SENSOR_EN], mask, mask); > + if (ret) { > + dev_err(priv->dev, "Sensor Enable failed\n"); > + return ret; > + } > + > + ret = regmap_field_write(priv->rf[TSENS_EN], 1); > + if (ret) { > + dev_err(priv->dev, "Enable failed\n"); > + return ret; > + } > + > + ret = regmap_field_write(priv->rf[TSENS_SW_RST], 0); > + > + return ret; > +} > + > static const struct tsens_ops ops_generic_v1 = { > .init = init_common, > .calibrate = calibrate_v1, > @@ -187,3 +234,16 @@ struct tsens_plat_data data_8976 = { > .feat = &tsens_v1_feat, > .fields = tsens_v1_regfields, > }; > + > +const struct tsens_ops ops_ipq5018 = { > + .init = init_ipq5018, > + .calibrate = tsens_calibrate_common, > + .get_temp = get_temp_tsens_valid, > +}; > + > +struct tsens_plat_data data_ipq5018 = { > + .num_sensors = 5, > + .ops = &ops_ipq5018, > + .feat = &tsens_v1_ipq5018_feat, > + .fields = tsens_v1_regfields, > +}; > diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c > index 0a43ccf02ec4..c792b9dc6676 100644 > --- a/drivers/thermal/qcom/tsens.c > +++ b/drivers/thermal/qcom/tsens.c > @@ -1101,6 +1101,9 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); > > static const struct of_device_id tsens_table[] = { > { > + .compatible = "qcom,ipq5018-tsens", > + .data = &data_ipq5018, > + }, { > .compatible = "qcom,ipq8064-tsens", > .data = &data_8960, > }, { > diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h > index e254cd2df904..b6594b546d11 100644 > --- a/drivers/thermal/qcom/tsens.h > +++ b/drivers/thermal/qcom/tsens.h > @@ -645,7 +645,7 @@ extern struct tsens_plat_data data_8960; > extern struct tsens_plat_data data_8226, data_8909, data_8916, data_8939, data_8974, data_9607; > > /* TSENS v1 targets */ > -extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956; > +extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956, data_ipq5018; > > /* TSENS v2 targets */ > extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2;
On 10/5/2023 12:37 AM, Robert Marko wrote: > > On 22. 09. 2023. 13:51, Sricharan R wrote: >> From: Sricharan Ramabadhran <quic_srichara@quicinc.com> >> >> IPQ5018 has tsens IP V1.0, 4 sensors and 1 interrupt. >> The soc does not have a RPM, hence tsens has to be reset and >> enabled in the driver init. Adding the driver support for same. >> >> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com> >> --- >> [v3] Fixed Dmitry's comments for error checks in init_ipq5018 >> >> drivers/thermal/qcom/tsens-v1.c | 60 +++++++++++++++++++++++++++++++++ >> drivers/thermal/qcom/tsens.c | 3 ++ >> drivers/thermal/qcom/tsens.h | 2 +- >> 3 files changed, 64 insertions(+), 1 deletion(-) >> >> diff --git a/drivers/thermal/qcom/tsens-v1.c >> b/drivers/thermal/qcom/tsens-v1.c >> index dc1c4ae2d8b0..acee2064f83e 100644 >> --- a/drivers/thermal/qcom/tsens-v1.c >> +++ b/drivers/thermal/qcom/tsens-v1.c >> @@ -79,6 +79,18 @@ static struct tsens_features tsens_v1_feat = { >> .trip_max_temp = 120000, >> }; >> +static struct tsens_features tsens_v1_ipq5018_feat = { >> + .ver_major = VER_1_X, >> + .crit_int = 0, >> + .combo_int = 0, >> + .adc = 1, >> + .srot_split = 1, >> + .max_sensors = 11, >> + .trip_min_temp = -40000, >> + .trip_max_temp = 120000, >> + .ignore_enable = 1, >> +}; >> + >> static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = { >> /* ----- SROT ------ */ >> /* VERSION */ >> @@ -150,6 +162,41 @@ static int __init init_8956(struct tsens_priv >> *priv) { >> return init_common(priv); >> } >> +static int init_ipq5018(struct tsens_priv *priv) > > __init is missing after int, otherwise I get modpost warning while > building: > WARNING: modpost: vmlinux: section mismatch in reference: > init_ipq5018+0x14 (section: .text) -> init_common (section: .init.text) ok, will fix it. Regards, Sricharan
diff --git a/drivers/thermal/qcom/tsens-v1.c b/drivers/thermal/qcom/tsens-v1.c index dc1c4ae2d8b0..acee2064f83e 100644 --- a/drivers/thermal/qcom/tsens-v1.c +++ b/drivers/thermal/qcom/tsens-v1.c @@ -79,6 +79,18 @@ static struct tsens_features tsens_v1_feat = { .trip_max_temp = 120000, }; +static struct tsens_features tsens_v1_ipq5018_feat = { + .ver_major = VER_1_X, + .crit_int = 0, + .combo_int = 0, + .adc = 1, + .srot_split = 1, + .max_sensors = 11, + .trip_min_temp = -40000, + .trip_max_temp = 120000, + .ignore_enable = 1, +}; + static const struct reg_field tsens_v1_regfields[MAX_REGFIELDS] = { /* ----- SROT ------ */ /* VERSION */ @@ -150,6 +162,41 @@ static int __init init_8956(struct tsens_priv *priv) { return init_common(priv); } +static int init_ipq5018(struct tsens_priv *priv) +{ + int ret; + u32 mask; + + ret = init_common(priv); + if (ret < 0) { + dev_err(priv->dev, "Init common failed %d\n", ret); + return ret; + } + + ret = regmap_field_write(priv->rf[TSENS_SW_RST], 1); + if (ret) { + dev_err(priv->dev, "Reset failed\n"); + return ret; + } + + mask = GENMASK(priv->num_sensors, 0); + ret = regmap_field_update_bits(priv->rf[SENSOR_EN], mask, mask); + if (ret) { + dev_err(priv->dev, "Sensor Enable failed\n"); + return ret; + } + + ret = regmap_field_write(priv->rf[TSENS_EN], 1); + if (ret) { + dev_err(priv->dev, "Enable failed\n"); + return ret; + } + + ret = regmap_field_write(priv->rf[TSENS_SW_RST], 0); + + return ret; +} + static const struct tsens_ops ops_generic_v1 = { .init = init_common, .calibrate = calibrate_v1, @@ -187,3 +234,16 @@ struct tsens_plat_data data_8976 = { .feat = &tsens_v1_feat, .fields = tsens_v1_regfields, }; + +const struct tsens_ops ops_ipq5018 = { + .init = init_ipq5018, + .calibrate = tsens_calibrate_common, + .get_temp = get_temp_tsens_valid, +}; + +struct tsens_plat_data data_ipq5018 = { + .num_sensors = 5, + .ops = &ops_ipq5018, + .feat = &tsens_v1_ipq5018_feat, + .fields = tsens_v1_regfields, +}; diff --git a/drivers/thermal/qcom/tsens.c b/drivers/thermal/qcom/tsens.c index 0a43ccf02ec4..c792b9dc6676 100644 --- a/drivers/thermal/qcom/tsens.c +++ b/drivers/thermal/qcom/tsens.c @@ -1101,6 +1101,9 @@ static SIMPLE_DEV_PM_OPS(tsens_pm_ops, tsens_suspend, tsens_resume); static const struct of_device_id tsens_table[] = { { + .compatible = "qcom,ipq5018-tsens", + .data = &data_ipq5018, + }, { .compatible = "qcom,ipq8064-tsens", .data = &data_8960, }, { diff --git a/drivers/thermal/qcom/tsens.h b/drivers/thermal/qcom/tsens.h index e254cd2df904..b6594b546d11 100644 --- a/drivers/thermal/qcom/tsens.h +++ b/drivers/thermal/qcom/tsens.h @@ -645,7 +645,7 @@ extern struct tsens_plat_data data_8960; extern struct tsens_plat_data data_8226, data_8909, data_8916, data_8939, data_8974, data_9607; /* TSENS v1 targets */ -extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956; +extern struct tsens_plat_data data_tsens_v1, data_8976, data_8956, data_ipq5018; /* TSENS v2 targets */ extern struct tsens_plat_data data_8996, data_ipq8074, data_tsens_v2;