| Message ID | 20240429001317.432-1-jszhang@kernel.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | riscv: dts: starfive: add Milkv Mars board device tree | expand |
From: Conor Dooley <conor.dooley@microchip.com> On Mon, 29 Apr 2024 08:13:09 +0800, Jisheng Zhang wrote: > The Milkv Mars is a development board based on the Starfive JH7110 SoC. > The board features: > > - JH7110 SoC > - 1/2/4/8 GiB LPDDR4 DRAM > - AXP15060 PMIC > - 40 pin GPIO header > - 3x USB 3.0 host port > - 1x USB 2.0 host port > - 1x M.2 E-Key > - 1x eMMC slot > - 1x MicroSD slot > - 1x QSPI Flash > - 1x 1Gbps Ethernet port > - 1x HDMI port > - 1x 2-lane DSI and 1x 4-lane DSI > - 1x 2-lane CSI > > [...] Applied to riscv-dt-for-next, thanks! I fixed up the nits of Emil's in the merge commit. [1/8] riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi https://git.kernel.org/conor/c/5e7922abddd4 [2/8] dt-bindings: riscv: starfive: add Milkv Mars board https://git.kernel.org/conor/c/4c536aa462f1 [3/8] riscv: dts: starfive: visionfive 2: update sound and codec dt node name https://git.kernel.org/conor/c/b9a1481f259c [4/8] riscv: dts: starfive: visionfive 2: use cpus label for timebase freq https://git.kernel.org/conor/c/ffddddf4aa8d [5/8] riscv: dts: starfive: visionfive 2: add tf cd-gpios https://git.kernel.org/conor/c/0ffce9d49abd [6/8] riscv: dts: starfive: visionfive 2: add "disable-wp" for tfcard https://git.kernel.org/conor/c/07da6ddf510b [7/8] riscv: dts: starfive: introduce a common board dtsi for jh7110 based boards https://git.kernel.org/conor/c/ac9a37e2d6b6 [8/8] riscv: dts: starfive: add Milkv Mars board device tree https://git.kernel.org/conor/c/9276badd9d03 Thanks, Conor.
The Milkv Mars is a development board based on the Starfive JH7110 SoC. The board features: - JH7110 SoC - 1/2/4/8 GiB LPDDR4 DRAM - AXP15060 PMIC - 40 pin GPIO header - 3x USB 3.0 host port - 1x USB 2.0 host port - 1x M.2 E-Key - 1x eMMC slot - 1x MicroSD slot - 1x QSPI Flash - 1x 1Gbps Ethernet port - 1x HDMI port - 1x 2-lane DSI and 1x 4-lane DSI - 1x 2-lane CSI patch1 adds 'cpus' label patch2 adds "milkv,mars" board dt-binding patch3 ~ patch4 adopt Krzysztof's suggestions to DT node names patch5 introduces a board common dtsi for visionfive2 and mars patch3 adds the mars board dts file describing the currently supported features: Namely PMIC, UART, I2C, GPIO, SD card, QSPI Flash, eMMC and Ethernet. Since v3: - collect Reviewed-by tag - rename the common dtsi to jh7110-common.dtsi - mv cd-gpios and disable-wp into jh7110-common.dtsi - fix "gmac1-rgmii-rxin-clock: 'clock-frequency' is a required property" warning Since v2: - add a common board file which can be used by vf2 and mars Since v1: - add two new patches which add "cpus" label and board dt-binding - adopt Krzysztof's suggestions, thanks Jisheng Zhang (8): riscv: dts: starfive: add 'cpus' label to jh7110 and jh7100 soc dtsi dt-bindings: riscv: starfive: add Milkv Mars board riscv: dts: starfive: visionfive 2: update sound and codec dt node name riscv: dts: starfive: visionfive 2: use cpus label for timebase freq riscv: dts: starfive: visionfive 2: add tf cd-gpios riscv: dts: starfive: visionfive 2: add "disable-wp" for tfcard riscv: dts: starfive: introduce a common board dtsi for jh7110 based boards riscv: dts: starfive: add Milkv Mars board device tree .../devicetree/bindings/riscv/starfive.yaml | 1 + arch/riscv/boot/dts/starfive/Makefile | 1 + arch/riscv/boot/dts/starfive/jh7100.dtsi | 2 +- .../boot/dts/starfive/jh7110-common.dtsi | 599 ++++++++++++++++++ .../boot/dts/starfive/jh7110-milkv-mars.dts | 30 + .../jh7110-starfive-visionfive-2.dtsi | 584 +---------------- arch/riscv/boot/dts/starfive/jh7110.dtsi | 2 +- 7 files changed, 634 insertions(+), 585 deletions(-) create mode 100644 arch/riscv/boot/dts/starfive/jh7110-common.dtsi create mode 100644 arch/riscv/boot/dts/starfive/jh7110-milkv-mars.dts