mbox series

[v3,0/7] ARM: dts: lan966x: dtsi improvements and KSwitch D10 support

Message ID 20220405160837.4093563-1-michael@walle.cc (mailing list archive)
Headers show
Series ARM: dts: lan966x: dtsi improvements and KSwitch D10 support | expand

Message

Michael Walle April 5, 2022, 4:08 p.m. UTC 
Add missing nodes for the flexcom blocks and a node for the SGPIO
block. Then add basic support for the Kontron KSwitch D10.

Microchip, please take a closer look at the compatible strings of
the newly added nodes.

changes since v2:
 - add second kontron board variant and moved common stuff into a
   new dtsi
 - moved the uart/i2c nodes inside of the flexcom node
 - moved sgpio child nodes inside of the sgpio node

changes since v1:
 - fixed indendation
 - keep compatible, reg first, move #address-cells and #size-cells
   towards the end

Michael Walle (7):
  ARM: dts: lan966x: swap dma channels for crypto node
  ARM: dts: lan966x: add sgpio node
  ARM: dts: lan966x: add missing uart DMA channel
  ARM: dts: lan966x: add all flexcom usart nodes
  ARM: dts: lan966x: add flexcom SPI nodes
  ARM: dts: lan966x: add flexcom I2C nodes
  ARM: dts: lan966x: add basic Kontron KSwitch D10 support

 arch/arm/boot/dts/Makefile                    |   4 +-
 ...lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts |  77 ++++++
 .../lan966x-kontron-kswitch-d10-mmt-8g.dts    |  13 +
 .../dts/lan966x-kontron-kswitch-d10-mmt.dtsi  |  75 ++++++
 arch/arm/boot/dts/lan966x.dtsi                | 227 +++++++++++++++++-
 5 files changed, 392 insertions(+), 4 deletions(-)
 create mode 100644 arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-6g-2gs.dts
 create mode 100644 arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt-8g.dts
 create mode 100644 arch/arm/boot/dts/lan966x-kontron-kswitch-d10-mmt.dtsi