diff mbox series

[04/36] wcn36xx: Specify ieee80211_rx_status.nss

Message ID	20200803031132.1427063-5-bryan.odonoghue@linaro.org (mailing list archive)
State	Changes Requested
Delegated to:	Kalle Valo
Headers	show Return-Path: <SRS0=Ljpw=BN=vger.kernel.org=linux-wireless-owner@kernel.org> From: Bryan O'Donoghue <bryan.odonoghue@linaro.org> To: kvalo@codeaurora.org Cc: wcn36xx@lists.infradead.org, linux-wireless@vger.kernel.org, bryan.odonoghue@linaro.org, shawn.guo@linaro.org Subject: [PATCH 04/36] wcn36xx: Specify ieee80211_rx_status.nss Date: Mon, 3 Aug 2020 04:11:00 +0100 Message-Id: <20200803031132.1427063-5-bryan.odonoghue@linaro.org> In-Reply-To: <20200803031132.1427063-1-bryan.odonoghue@linaro.org> References: <20200803031132.1427063-1-bryan.odonoghue@linaro.org> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Sender: linux-wireless-owner@vger.kernel.org Precedence: bulk
Series	wcn36xx: Add support for WCN3680 802.11ac \| expand [00/36] wcn36xx: Add support for WCN3680 802.11ac [01/36] wcn36xx: Add ability to identify WCN3680 [02/36] wcn36xx: Add ieee802.11 VHT flags [03/36] wcn36xx: Add 802.11ac MCS rates [04/36] wcn36xx: Specify ieee80211_rx_status.nss [05/36] wcn36xx: Add 802.11ac HAL param bitfields [06/36] wcn36xx: Add Supported rates V1 structure [07/36] wcn36xx: Use existing pointers in wcn36xx_smd_config_bss_v1 [08/36] wcn36xx: Set feature DOT11AC for wcn3680 [09/36] wcn36xx: Add VHT fields to parameter data structures [10/36] wcn36xx: Use V1 data structure to store supported rates [11/36] wcn36xx: Add wcn36xx_set_default_rates_v1 [12/36] wcn36xx: Add VHT rates to wcn36xx_update_allowed_rates() [13/36] wcn36xx: Add wcn36xx_smd_set_sta_default_vht_params() [14/36] wcn36xx: Add wcn36xx_smd_set_sta_default_ht_ldpc_params() [15/36] wcn36xx: Add wcn36xx_smd_set_sta_vht_params() [16/36] wcn36xx: Add wcn36xx_smd_set_sta_ht_ldpc_params() [17/36] wcn36xx: Add wcn36xx_smd_set_bss_vht_params() [18/36] wcn36xx: Add wrapper function wcn36xx_smd_set_sta_params_v1() [19/36] wcn36xx: Define INIT_HAL_MSG_V1() [20/36] wcn36xx: Convert to VHT parameter structure on wcn3680 [21/36] wcn36xx: Functionally decompose wcn36xx_smd_config_sta() [22/36] wcn36xx: Move wcn36xx_smd_set_sta_params() inside wcn36xx_smd_config_bss() [23/36] wcn36xx: Move BSS parameter setup to wcn36xx_smd_set_bss_params() [24/36] wcn36xx: Add wcn36xx_smd_config_bss_v0 [25/36] wcn36xx: Update wcn36xx_smd_config_bss_v1() to operate internally [26/36] wcn36xx: Convert to using wcn36xx_smd_config_bss_v0() [27/36] wcn36xx: Remove dead code in wcn36xx_smd_config_bss() [28/36] wcn36xx: Latch VHT specific BSS parameters to firmware [29/36] wcn36xx: Add accessor macro HW_VALUE_CHANNEL for hardware channels [30/36] wcn36xx: Use HW_VALUE_CHANNEL macro to get channel number [31/36] wcn36xx: Add accessor macro HW_VALUE_PHY for PHY settings [32/36] wcn36xx: Encode PHY mode for 80MHz channel in hw_value [33/36] wcn36xx: Set PHY into correct mode for 80MHz channel width [34/36] wcn36xx: Extend HAL param config list [35/36] wcn36xx: Define wcn3680 specific firmware parameters [36/36] wcn36xx: Add ability to download wcn3680 specific firmware parameters

Commit Message

Bryan O'Donoghue Aug. 3, 2020, 3:11 a.m. UTC

Specify the number of spatial streams in ieee80211_rx_status. For non VHT
data-rates the wireless core doesn't care about this field, however for VHT
data-rates it does.

Every version of wcn36xx has one spatial stream, so specify nss for
wcn3620, wcn3660 and wcn3680 now.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
---
 drivers/net/wireless/ath/wcn36xx/txrx.c | 1 +
 1 file changed, 1 insertion(+)

diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/wcn36xx/txrx.c b/drivers/net/wireless/ath/wcn36xx/txrx.c
index 05a84f82584c..903b47b55728 100644
--- a/drivers/net/wireless/ath/wcn36xx/txrx.c
+++ b/drivers/net/wireless/ath/wcn36xx/txrx.c
@@ -272,6 +272,7 @@  int wcn36xx_rx_skb(struct wcn36xx *wcn, struct sk_buff *skb)
 		status.bw = rate->bw;
 		status.rate_idx = rate->mcs_or_legacy_index;
 		sband = wcn->hw->wiphy->bands[status.band];
+		status.nss = 1;
 
 		if (status.band == NL80211_BAND_5GHZ &&
 		    status.encoding == RX_ENC_LEGACY &&