new file mode 100644
@@ -0,0 +1,199 @@
+/* SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */
+/* Copyright(c) 2019-2022, Celeno Communications Ltd. */
+
+#ifndef CL_REG_ACCESS_H
+#define CL_REG_ACCESS_H
+
+#include "hw.h"
+#include "chip.h"
+
+#define hwreg_pr(...) \
+ do { \
+ if (cl_hw->reg_dbg) \
+ cl_dbg_verbose(__VA_ARGS__); \
+ } while (0)
+
+#define chipreg_pr(...) \
+ do { \
+ if (chip->reg_dbg) \
+ cl_dbg_chip_verbose(__VA_ARGS__); \
+ } while (0)
+
+#define XTENSA_PIF_BASE_ADDR 0x60000000
+
+/*
+ * SHARED_RAM Address.
+ * Actually the PCI BAR4 window will be configured such as SHARED RAM
+ * is accessed with offset 0 (within the AHB Bridge main window)
+ */
+#define SHARED_RAM_START_ADDR 0x00000000
+#define REG_MAC_HW_SMAC_OFFSET 0x80000
+#define REG_PHY_LMAC_OFFSET 0x000000
+#define REG_PHY_SMAC_OFFSET 0x100000
+#define REG_MACDSP_API_BASE_ADDR 0x00400000
+#define REG_MAC_HW_BASE_ADDR 0x00600000
+#define REG_RIU_BASE_ADDR 0x00486000
+#define REG_RICU_BASE_ADDR 0x004B4000
+#define APB_REGS_BASE_ADDR 0x007C0000
+#define I2C_REG_BASE_ADDR (APB_REGS_BASE_ADDR + 0x3000)
+
+/* MACSYS_GCU_XT_CONTROL fields */
+#define SMAC_DEBUG_ENABLE BIT(21)
+#define SMAC_BREAKPOINT BIT(20)
+#define SMAC_OCD_HALT_ON_RESET BIT(19)
+#define SMAC_RUN_STALL BIT(18)
+#define SMAC_DRESET BIT(17)
+#define SMAC_BRESET BIT(16)
+#define UMAC_DEBUG_ENABLE BIT(13)
+#define UMAC_BREAKPOINT BIT(11)
+#define UMAC_OCD_HALT_ON_RESET BIT(11)
+#define UMAC_RUN_STALL BIT(10)
+#define UMAC_DRESET BIT(9)
+#define UMAC_BRESET BIT(8)
+#define LMAC_DEBUG_ENABLE BIT(5)
+#define LMAC_BREAKPOINT BIT(4)
+#define LMAC_OCD_HALT_ON_RESET BIT(3)
+#define LMAC_RUN_STALL BIT(2)
+#define LMAC_DRESET BIT(1)
+#define LMAC_BRESET BIT(0)
+
+#define XMAC_BRESET \
+ (LMAC_BRESET | SMAC_BRESET | UMAC_BRESET)
+#define XMAC_DRESET \
+ (LMAC_DRESET | SMAC_DRESET | UMAC_DRESET)
+#define XMAC_RUN_STALL \
+ (LMAC_RUN_STALL | SMAC_RUN_STALL | UMAC_RUN_STALL)
+#define XMAC_OCD_HALT_ON_RESET \
+ (LMAC_OCD_HALT_ON_RESET | SMAC_OCD_HALT_ON_RESET | UMAC_OCD_HALT_ON_RESET)
+#define XMAC_DEBUG_ENABLE \
+ (LMAC_DEBUG_ENABLE | SMAC_DEBUG_ENABLE | UMAC_DEBUG_ENABLE)
+
+static inline u32 get_actual_reg(struct cl_hw *cl_hw, u32 reg)
+{
+ if (!cl_hw)
+ return -1;
+
+ if ((reg & 0x00ff0000) == REG_MAC_HW_BASE_ADDR)
+ return cl_hw->mac_hw_regs_offset + reg;
+
+ if ((reg & 0x00f00000) == REG_MACDSP_API_BASE_ADDR) {
+ if (cl_hw->chip->conf->ci_phy_dev == PHY_DEV_DUMMY)
+ return -1;
+ return cl_hw->phy_regs_offset + reg;
+ }
+
+ return reg;
+}
+
+static inline bool cl_reg_is_phy_tcvX(u32 phy_reg, u32 reg_offset)
+{
+ return (phy_reg & 0xf00000) == (REG_MACDSP_API_BASE_ADDR + reg_offset);
+}
+
+static inline bool cl_reg_is_phy_tcv0(u32 phy_reg)
+{
+ return cl_reg_is_phy_tcvX(phy_reg, REG_PHY_LMAC_OFFSET);
+}
+
+static inline bool cl_reg_is_phy_tcv1(u32 phy_reg)
+{
+ return cl_reg_is_phy_tcvX(phy_reg, REG_PHY_SMAC_OFFSET);
+}
+
+static inline u32 cl_reg_read(struct cl_hw *cl_hw, u32 reg)
+{
+ u32 actual_reg = get_actual_reg(cl_hw, reg);
+ u32 val = 0;
+
+ if (actual_reg == (u32)(-1))
+ return 0xff;
+
+ val = ioread32(cl_hw->chip->pci_bar0_virt_addr + actual_reg);
+ hwreg_pr(cl_hw, "reg=0x%x, val=0x%x\n", actual_reg, val);
+ return val;
+}
+
+static inline void cl_reg_write_direct(struct cl_hw *cl_hw, u32 reg, u32 val)
+{
+ u32 actual_reg = get_actual_reg(cl_hw, reg);
+
+ if (actual_reg == (u32)(-1))
+ return;
+
+ hwreg_pr(cl_hw, "reg=0x%x, val=0x%x\n", actual_reg, val);
+ iowrite32(val, cl_hw->chip->pci_bar0_virt_addr + actual_reg);
+}
+
+#define BASE_ADDR(reg) ((ptrdiff_t)(reg) & 0x00fff000)
+
+static inline bool should_send_msg(struct cl_hw *cl_hw, u32 reg)
+{
+ /*
+ * Check in what cases we should send a message to the firmware,
+ * and in what cases we should write directly.
+ */
+ if (!cl_hw->fw_active)
+ return false;
+
+ return ((BASE_ADDR(reg) == REG_RIU_BASE_ADDR) ||
+ (BASE_ADDR(reg) == REG_MAC_HW_BASE_ADDR));
+}
+
+static inline int cl_reg_write(struct cl_hw *cl_hw, u32 reg, u32 val)
+{
+ u32 actual_reg = get_actual_reg(cl_hw, reg);
+ int ret = 0;
+
+ if (actual_reg == (u32)(-1))
+ return -1;
+
+ if (should_send_msg(cl_hw, reg)) {
+ hwreg_pr(cl_hw, "calling cl_msg_tx_reg_write: reg=0x%x, val=0x%x\n",
+ actual_reg, val);
+ cl_msg_tx_reg_write(cl_hw, (XTENSA_PIF_BASE_ADDR + actual_reg), val, U32_MAX);
+ } else {
+ hwreg_pr(cl_hw, "reg=0x%x, val=0x%x\n", actual_reg, val);
+ iowrite32(val, cl_hw->chip->pci_bar0_virt_addr + actual_reg);
+ }
+
+ return ret;
+}
+
+static inline int cl_reg_write_mask(struct cl_hw *cl_hw, u32 reg, u32 val, u32 mask)
+{
+ u32 actual_reg = get_actual_reg(cl_hw, reg);
+ int ret = 0;
+
+ if (actual_reg == (u32)(-1))
+ return -1;
+
+ if (should_send_msg(cl_hw, reg)) {
+ hwreg_pr(cl_hw, "calling cl_msg_tx_reg_write: reg=0x%x, val=0x%x, mask=0x%x\n",
+ actual_reg, val, mask);
+ cl_msg_tx_reg_write(cl_hw, (XTENSA_PIF_BASE_ADDR + actual_reg), val, mask);
+ } else {
+ u32 reg_rd = ioread32(cl_hw->chip->pci_bar0_virt_addr + actual_reg);
+ u32 val_write = ((reg_rd & ~mask) | (val & mask));
+
+ hwreg_pr(cl_hw, "reg=0x%x, mask=0x%x, val=0x%x\n", actual_reg, mask, val_write);
+ iowrite32(val_write, cl_hw->chip->pci_bar0_virt_addr + actual_reg);
+ }
+
+ return ret;
+}
+
+static inline void cl_reg_write_chip(struct cl_chip *chip, u32 reg, u32 val)
+{
+ chipreg_pr(chip, "reg=0x%x, val=0x%x\n", reg, val);
+ iowrite32(val, chip->pci_bar0_virt_addr + reg);
+}
+
+static inline u32 cl_reg_read_chip(struct cl_chip *chip, u32 reg)
+{
+ u32 val = ioread32(chip->pci_bar0_virt_addr + reg);
+
+ chipreg_pr(chip, "reg=0x%x, val=0x%x\n", reg, val);
+ return val;
+}
+
+#endif /* CL_REG_ACCESS_H */