Show patches with: State = Action Required       |   5956 patches
« 1 2 ... 42 43 44 … 59 60 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[02/13] mtd: lantiq-flash: drop check of boot select 1 - - --- 2017-04-17 Hauke Mehrtens New
[01/13] MIPS: lantiq: Use of_platform_populate instead of __dt_register_buses - - - --- 2017-04-17 Hauke Mehrtens New
[2/2] spi: atmel: add deepest PM support to SAMA5D2 3 - - --- 2017-04-14 Quentin Schulz New
[1/2] spi: atmel: factorize reusable code for SPI controller init 1 - - --- 2017-04-14 Quentin Schulz New
[RFC,5/5] spi: imx: Add support for SPI Slave mode for imx53 and imx6 chips - - - --- 2017-04-13 Wang, Jiada New
[RFC,4/5] ARM: dts: imx: change compatiblity for SPI controllers on imx53 later soc - - - --- 2017-04-13 Wang, Jiada New
[RFC,3/5] spi: imx: add selection for iMX53 and iMX6 controller - - - --- 2017-04-13 Wang, Jiada New
[RFC,2/5] spi: spidev: use different name for SPI controller slave mode device - - - --- 2017-04-13 Wang, Jiada New
[RFC,1/5] spi: core: add support to work in Slave mode - - - --- 2017-04-13 Wang, Jiada New
[v2,1/2] spi: Add can_dma like interface for spi_flash_read - - - --- 2017-04-11 Vignesh Raghavendra New
[2/2] spi: spi-ti-qspi: Use bounce buffer if read buffer is not DMA'ble - - - --- 2017-03-31 Vignesh Raghavendra New
[1/2] spi: Allow master drivers to set realtime priority - 1 - --- 2017-03-23 Lukas Wunner New
[2/2] spi: bcm2835: Allow platform to set realtime priority - - - --- 2017-03-23 Lukas Wunner New
[PATCHv2,2/2] spi: imx: document use of native chip-selects in devicetree - - - --- 2017-03-21 Greg Ungerer New
[PATCHv2,1/2] spi: imx: fix use of native chip-selects with devicetree - - - --- 2017-03-21 Greg Ungerer New
spi: spidev_test: add option to continously transfer data - - - --- 2017-03-20 Frode Isaksen New
[4/4] arm64: dts: NS2: Remove nonexistent properties - - - --- 2017-03-20 Antonio Borneo New
[3/4] arm64: dts: amd: Remove nonexistent property - - - --- 2017-03-20 Antonio Borneo New
[2/4] ARM: SPEAr: DT: Remove nonexistent properties 1 - - --- 2017-03-20 Antonio Borneo New
[1/2] spi: imx: set correct chip_select in platform setup - - - --- 2017-03-17 Greg Ungerer New
[RFC] spi: imx: fix use of native chip-selects with devicetree 1 - - --- 2017-03-13 Greg Ungerer New
[PATCHv2] spi: zynqmp: Add runtime support - - - --- 2017-03-03 Shubhrajyoti Datta New
spi: zynqmp: Add runtime support - - - --- 2017-03-02 Shubhrajyoti Datta New
[V2,1/3] spi/bcm63xx-hsspi: allow providing clock rate through a second clock 1 - - --- 2017-03-01 Jonas Gorski New
[v3,2/2] spi: allow registering empty spi_board_info lists - - - --- 2017-02-28 Dmitry Torokhov New
[v3,1/2] spi: allow attaching device properties to SPI board info - - - --- 2017-02-28 Dmitry Torokhov New
[v2,3/3] spi: allow registering empty spi_board_info lists - 1 - --- 2017-02-28 Dmitry Torokhov New
[v2,2/3] spi: allocate spi_board_info entries one by one - - - --- 2017-02-28 Dmitry Torokhov New
[v2,1/3] spi: allow attaching device properties to SPI board info - - - --- 2017-02-28 Dmitry Torokhov New
[3/3] spi: allow registering empty spi_board_info lists - - - --- 2017-02-28 Dmitry Torokhov New
[2/3] spi: allocate spi_board_info entries one by one - - - --- 2017-02-28 Dmitry Torokhov New
[1/3] spi: allow attaching device properties to SPI board info - - - --- 2017-02-28 Dmitry Torokhov New
[RFC,2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support - - - --- 2017-02-27 Vignesh Raghavendra New
[RFC,1/2] mtd: spi-nor: Introduce bounce buffer to handle vmalloc'd buffers - - - --- 2017-02-27 Vignesh Raghavendra New
[v6,3/3] mtd: spi-nor: Add spi-nor mtd suspend and resume handlers - - - --- 2017-02-24 Kamal Dasu New
[v6,2/3] mtd: spi-nor: Add spi-nor flash device synchronization between flash states - - - --- 2017-02-24 Kamal Dasu New
[v6,1/3] mtd: spi-nor: Add spi-nor init function - - - --- 2017-02-24 Kamal Dasu New
[v3,3/6] spi: davinci: use rx buffer as dummy tx buffer - - - --- 2017-02-23 Frode Isaksen New
[v3,2/6] spi: davinci: enable DMA when channels are defined in DT - - - --- 2017-02-23 Frode Isaksen New
SPI fix needed in kernel (DragonBoard 410c) - - - --- 2017-02-22 King, Lawrence New
[v5,2/2] mtd: m25p80: Added pm ops support - - - --- 2017-02-22 Kamal Dasu New
[v5,1/2] mtd: spi-nor: Added spi-nor init function - - - --- 2017-02-22 Kamal Dasu New
[3/3] spi/bcm63xx-hsspi: allow for probing through devicetree 1 - - --- 2017-02-22 Jonas Gorski New
[2/3] dt-bindings: spi: document bcm63xx HS SPI devicetree bindings 1 1 - --- 2017-02-22 Jonas Gorski New
spi: Add spi-bits-per-word binding. - - - --- 2017-02-20 Adrian Fiergolski New
[v2,6/6] spi: loopback-test: add option to use vmalloc'ed buffers - - - --- 2017-02-17 Frode Isaksen New
[v2,5/6] spi: davinci: do not use DMA if transfer length is less than 16 - - - --- 2017-02-17 Frode Isaksen New
[v2,4/6] spi: davinci: flush caches when performing DMA - - - --- 2017-02-17 Frode Isaksen New
[v2,2/6] spi: davinci: enable DMA when channels are defined in DT - - - --- 2017-02-17 Frode Isaksen New
[v2,1/6] spi: davinci: Use SPI framework to handle DMA mapping - - - --- 2017-02-17 Frode Isaksen New
[7/7] spi: spi-ep93xx: use the default master transfer queueing mechanism - - - --- 2017-02-16 H Hartley Sweeten New
[5/7] spi: spi-ep93xx: pass the spi_master pointer around - - - --- 2017-02-16 H Hartley Sweeten New
[4/7] spi: spi-ep93xx: absorb the interrupt enable/disable helpers - - - --- 2017-02-16 H Hartley Sweeten New
[3/7] spi: spi-ep93xx: add spi master prepare_transfer_hardware() - - - --- 2017-02-16 H Hartley Sweeten New
[2/7] spi: spi-ep93xx: use 32-bit read/write for all registers - - - --- 2017-02-16 H Hartley Sweeten New
[v2] spi: spi-ep93xx: simplify GPIO chip selects - - - --- 2017-02-16 H Hartley Sweeten New
Add possibility to define bits-per-word property. - - - --- 2017-02-16 Adrian Fiergolski New
spi: spi-ep93xx: simplify GPIO chip selects - - - --- 2017-02-15 H Hartley Sweeten New
[1/2] spi: rspi: Fixes bogus received byte in qspi_transfer_in() - 1 - --- 2017-02-15 Cao Van Dong New
[v4] spi: rspi: Fixes bogus received byte in qspi_transfer_in() - 1 - --- 2017-02-15 Cao Van Dong New
spi: rspi: Fixes bogus received byte and replaces "n" by "len" in commit 3be09be - 1 - --- 2017-02-15 Cao Van Dong New
[v3] spi: rspi: Fix bogus received byte in qspi_transfer_in() - 1 - --- 2017-02-15 Cao Van Dong New
[v4,2/2] mtd: m25p80: Added pm ops support - - - --- 2017-02-14 Kamal Dasu New
[v4,1/2] mtd: spi-nor: Added spi-nor init function - - - --- 2017-02-14 Kamal Dasu New
spi/sun6i: Add Master Sample Data Mode for SPI - - - --- 2017-02-13 viniciusfre@gmail.com New
[v2] ARM: spi/sun7i: Add Master Sample Data Mode for SPI 1 1 - --- 2017-02-11 viniciusfre@gmail.com New
Add Master Sample Data Mode for SPI - 1 - --- 2017-02-10 viniciusfre@gmail.com New
[v3,2/2] mtd: m25p80: Added pm ops support - - - --- 2017-02-10 Kamal Dasu New
[v3,1/2] mtd: spi-nor: Added spi-nor reset function - - - --- 2017-02-10 Kamal Dasu New
[8/8] spi: loopback-test: limit length to spi_max_transfer_size() - - - --- 2017-02-10 Frode Isaksen New
[7/8] spi: loopback-test: add option to use vmalloc'ed buffers - - - --- 2017-02-10 Frode Isaksen New
[6/8] spi: loopback-test: set HW loopback mode if loopback set - - - --- 2017-02-10 Frode Isaksen New
[5/8] spi: davinci: do not use DMA if transfer length is less than 16 - - - --- 2017-02-10 Frode Isaksen New
[4/8] spi: davinci: flush caches when performing DMA - - - --- 2017-02-10 Frode Isaksen New
[3/8] spi: davinci: limit the transfer size if DMA enabled - - - --- 2017-02-10 Frode Isaksen New
[2/8] spi: davinci: enable DMA when channels are defined in DT - - - --- 2017-02-10 Frode Isaksen New
[1/8] spi: davinci: Use SPI framework to handle DMA mapping - - - --- 2017-02-10 Frode Isaksen New
[v2] spi: s3c64xx: fix inconsistency between binding and driver - 1 - --- 2017-02-10 Andi Shyti New
[v2,2/2] mtd: m25p80: Added pm ops support - - - --- 2017-02-08 Kamal Dasu New
[v2,1/2] mtd: spi-nor: Added spi-nor reset function - - - --- 2017-02-08 Kamal Dasu New
[2/2] spi: imx: dynamic burst length adjust for DMA mode - - - --- 2017-02-08 Wang, Jiada New
[1/2] spi: imx: dynamic burst length adjust for PIO mode - - - --- 2017-02-08 Wang, Jiada New
[2/2] spi: s3c64xx: fix potential division by zero - - - --- 2017-02-07 Andi Shyti New
[1/2] spi: s3c64xx: fix potential segmentation fault - - - --- 2017-02-07 Andi Shyti New
[1/2] spi: davinci: Use SPI framework to handle DMA mapping - - - --- 2017-02-06 Fabien Parent New
[v6,3/3] spi: acpi: Initialize modalias from of_compatible 2 2 1 --- 2017-02-05 Dan O'Donovan New
[v6,2/3] i2c: acpi: Initialize info.type from of_compatible 1 2 1 --- 2017-02-05 Dan O'Donovan New
[v6,1/3] ACPI / bus: Export acpi_of_modalias equiv of of_modalias_node - 3 1 --- 2017-02-05 Dan O'Donovan New
[v5,3/3] spi: acpi: Initialize modalias from of_compatible 1 2 1 --- 2017-02-04 Dan O'Donovan New
[v5,2/3] i2c: acpi: Initialize info.type from of_compatible 1 2 1 --- 2017-02-04 Dan O'Donovan New
[v5,1/3] ACPI / bus: Export acpi_of_modalias equiv of of_modalias_node - 3 1 --- 2017-02-04 Dan O'Donovan New
[v1,5/5] spi: bcm-qspi: Implement the master flash_pm_supported() call - - - --- 2017-02-03 Kamal Dasu New
[v1,4/5] mtd: m25p80: Check if the spi flash device has pm support - - - --- 2017-02-03 Kamal Dasu New
[v1,3/5] spi: Added way to check for pm support for flash devices - - - --- 2017-02-03 Kamal Dasu New
[v1,2/5] mtd: m25p80: Added pm ops support - - - --- 2017-02-03 Kamal Dasu New
[v1,1/5] mtd: spi-nor: Added way to rescan spi-nor device - - - --- 2017-02-03 Kamal Dasu New
spi - Fix possible NULL derefrence. - - - --- 2017-01-30 shailendra.v@samsung.com New
[v4,3/3] spi: acpi: Initialize modalias from of_compatible - 2 1 --- 2017-01-27 Dan O'Donovan New
[v4,2/3] i2c: acpi: Initialize info.type from of_compatible 1 2 1 --- 2017-01-27 Dan O'Donovan New
[v4,1/3] ACPI / bus: Export acpi_of_modalias equiv of of_modalias_node - 3 1 --- 2017-01-27 Dan O'Donovan New
« 1 2 ... 42 43 44 … 59 60 »