Show patches with: Submitter = Martin Blumenstingl       |   1219 patches
« 1 2 ... 6 7 8 … 12 13 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[1/7] dt-bindings: iio: adc: meson-saradc: add temperature sensor support meson-saradc: add chip temperature support - - - --- 2018-10-28 Martin Blumenstingl Superseded
[v2,3/3] ARM: dts: meson: switch the clock controller to the HHI register area Meson8/Meson8b: introduce a HHI syscon node 1 - - --- 2018-10-28 Martin Blumenstingl Accepted
[v2,2/3] clk: meson: meson8b: use the HHI syscon if available Meson8/Meson8b: introduce a HHI syscon node 1 - - --- 2018-10-28 Martin Blumenstingl Not Applicable
[v2,1/3] dt-bindings: clock: meson8b: use the registers from the HHI syscon Meson8/Meson8b: introduce a HHI syscon node 1 - - --- 2018-10-28 Martin Blumenstingl Not Applicable
[2/2] clk: meson: meson8b: fix the width of the cpu_scale_div clock Meson8b: fixes for the cpu_scale_div clock - - - --- 2018-09-27 Martin Blumenstingl Not Applicable
[1/2] clk: meson: meson8b: fix incorrect divider mapping in cpu_scale_table Meson8b: fixes for the cpu_scale_div clock - - - --- 2018-09-27 Martin Blumenstingl Not Applicable
[2/2] iio: adc: meson-saradc: use the address attribute from iio_chan_spec meson-saradc: preparations for temperature sensor support - - - --- 2018-09-24 Martin Blumenstingl Not Applicable
[1/2] iio: adc: meson-saradc: do not use meson_sar_adc_iio_channels directly meson-saradc: preparations for temperature sensor support - - - --- 2018-09-24 Martin Blumenstingl Not Applicable
[3/3] iio: adc: meson-saradc: simplify access to meson_sar_adc_param meson-saradc: small code improvements - - - --- 2018-09-22 Martin Blumenstingl Accepted
[2/3] iio: adc: meson-saradc: use of_device_get_match_data meson-saradc: small code improvements - - - --- 2018-09-22 Martin Blumenstingl Accepted
[1/3] iio: adc: meson-saradc: remove #define MESON_SAR_ADC_DELTA_10_TS_C_SHIFT meson-saradc: small code improvements - - - --- 2018-09-22 Martin Blumenstingl Accepted
[v2,5/5] ARM: dts: meson8b: Add support for the Endless Mini (EC-100) Meson8b: add support for the Endless Mini EC-100 - - - --- 2018-09-22 Martin Blumenstingl Accepted
[v2,4/5] ARM: dts: meson8b: add the RMII pins Meson8b: add support for the Endless Mini EC-100 - - - --- 2018-09-22 Martin Blumenstingl Accepted
[v2,3/5] ARM: dts: meson8b: add the I2C_A, PWM_C and UART_B pins Meson8b: add support for the Endless Mini EC-100 - - - --- 2018-09-22 Martin Blumenstingl Accepted
[v2,2/5] dt-bindings: arm: amlogic: Add the Endless Mobile Endless Mini (EC-100) Meson8b: add support for the Endless Mini EC-100 - 1 - --- 2018-09-22 Martin Blumenstingl Accepted
[v2,1/5] dt-bindings: add vendor prefix for "Endless Mobile, Inc." Meson8b: add support for the Endless Mini EC-100 - 1 - --- 2018-09-22 Martin Blumenstingl Accepted
[4/4] ARM: dts: meson8b: odroidc1: add stdout-path property Meson8b: Odroid-C1 improvements - - - --- 2018-09-13 Martin Blumenstingl Accepted
[3/4] ARM: dts: meson8b: odroidc1: enable the SAR ADC Meson8b: Odroid-C1 improvements - - - --- 2018-09-13 Martin Blumenstingl Accepted
[2/4] ARM: dts: meson8b: odroidc1: add the fixed voltage regulators Meson8b: Odroid-C1 improvements - - - --- 2018-09-13 Martin Blumenstingl Accepted
[1/4] ARM: dts: meson8b: odroidc1: add the CPU voltage regulator Meson8b: Odroid-C1 improvements - - - --- 2018-09-13 Martin Blumenstingl Accepted
[5/5] ARM: dts: meson8b: Add support for the Endless Mini (EC-100) Meson8b: add support for the Endless Mini EC-100 - - - --- 2018-09-13 Martin Blumenstingl Superseded
[4/5] ARM: dts: meson8b: add the RMII pins Meson8b: add support for the Endless Mini EC-100 - - - --- 2018-09-13 Martin Blumenstingl Superseded
[3/5] ARM: dts: meson8b: add the I2C_A, PWM_C and UART_B pins Meson8b: add support for the Endless Mini EC-100 - - - --- 2018-09-13 Martin Blumenstingl Superseded
[2/5] dt-bindings: arm: amlogic: Add the Endless Mobile Endless Mini (EC-100) Meson8b: add support for the Endless Mini EC-100 - 1 - --- 2018-09-13 Martin Blumenstingl Superseded
[1/5] dt-bindings: add vendor prefix for "Endless Mobile, Inc." Meson8b: add support for the Endless Mini EC-100 - 1 - --- 2018-09-13 Martin Blumenstingl Superseded
[v2,2/2] clk: meson: meson8b: use the regmap in the internal reset controller meson8b: register the clock controller early - - - --- 2018-09-01 Martin Blumenstingl Not Applicable
[v2,1/2] clk: meson: meson8b: register the clock controller early meson8b: register the clock controller early - - - --- 2018-09-01 Martin Blumenstingl Not Applicable
[2/2] iio: adc: meson-saradc: add support for the Meson8m2 SoCs meson-saradc: add support for the Meson8m2 SoC - - - --- 2018-07-21 Martin Blumenstingl Not Applicable
[1/2] dt-bindings: iio: adc: add Meson8m2 support meson-saradc: add support for the Meson8m2 SoC - - - --- 2018-07-21 Martin Blumenstingl Not Applicable
[3/3] ARM: dts: meson: switch the clock controller to the HHI register area Meson8/Meson8b: introduce a HHI syscon node - - - --- 2018-07-21 Martin Blumenstingl Changes Requested
[2/3] clk: meson: meson8b: use the HHI syscon if available Meson8/Meson8b: introduce a HHI syscon node - - - --- 2018-07-21 Martin Blumenstingl Changes Requested
[1/3] dt-bindings: clock: meson8b: use the registers from the HHI syscon Meson8/Meson8b: introduce a HHI syscon node - - - --- 2018-07-21 Martin Blumenstingl Changes Requested
[2/2] clk: meson: meson8b: use the regmap in the internal reset controller meson8b: register the clock controller early - - - --- 2018-07-21 Martin Blumenstingl Not Applicable
[1/2] clk: meson: meson8b: register the clock controller early meson8b: register the clock controller early - - - --- 2018-07-21 Martin Blumenstingl Not Applicable
[2/2] ARM: dts: meson8b: fix the clock controller register size fix clock controller register size on Meson8/Meson8b - 1 - --- 2018-07-21 Martin Blumenstingl Accepted
[1/2] ARM: dts: meson8: fix the clock controller register size fix clock controller register size on Meson8/Meson8b - 1 - --- 2018-07-21 Martin Blumenstingl Accepted
[3/3] ARM: dts: meson8b: add the ARM TWD timer - - - --- 2018-07-21 Martin Blumenstingl Superseded
[2/3] ARM: dts: meson8: add the ARM TWD timer - - - --- 2018-07-21 Martin Blumenstingl Superseded
[1/3] ARM: meson: select HAVE_ARM_TWD when SMP support is enabled - - - --- 2018-07-21 Martin Blumenstingl Superseded
[2/2] clk: meson: meson8b: add the CPU_DIV16 clock - - - --- 2018-07-21 Martin Blumenstingl Not Applicable
[1/2] dt-bindings: clock: meson8b: export the CPU_DIV16 clock - - - --- 2018-07-21 Martin Blumenstingl Not Applicable
[1/3] soc: amlogic: Add Meson GX Clock Measure driver - - - --- 2018-07-03 Martin Blumenstingl Changes Requested
[v2,1/1] mtd: rawnand: hynix: fix decoding the OOB size on H27UCG8T2BTR - 1 - --- 2018-06-24 Martin Blumenstingl Not Applicable
[RfC,v1,5/5] ARM64: dts: meson-gxl: add support for the Oranth Tanix TX3 Mini - - - --- 2018-06-24 Martin Blumenstingl Not Applicable
[RfC,v1,4/5] ARM64: dts: meson-gxl: add support for the S905W SoC and the P281 board - WiP - - - --- 2018-06-24 Martin Blumenstingl Not Applicable
[RfC,v1,3/5] dt-bindings: arm: amlogic: Add support for the Oranth Tanix TX3 Mini - 1 - --- 2018-06-24 Martin Blumenstingl Not Applicable
[RfC,v1,2/5] dt-bindings: arm: amlogic: Add support for GXL S905W and the P281 board - 1 - --- 2018-06-24 Martin Blumenstingl Not Applicable
[RfC,v1,1/5] dt-bindings: add vendor prefix for Shenzhen Oranth Technology Co., Ltd. - 1 - --- 2018-06-24 Martin Blumenstingl Not Applicable
[1/1] ARM64: dts: meson-gx-p23x-q20x: move the wifi node to each board's .dts - 1 - --- 2018-06-23 Martin Blumenstingl Accepted
ARM64: dts: meson-gxl: fix Mali GPU compatible string 1 - - --- 2018-06-23 Martin Blumenstingl Accepted
[1/1] ARM64: dts: meson: enable the saradc node in meson-gx-p23x-q20x.dtsi - 1 - --- 2018-06-23 Martin Blumenstingl Accepted
[2/2] ARM: meson: merge Kconfig symbol MACH_MESON8B into MACH_MESON8 - - - --- 2018-05-20 Martin Blumenstingl Accepted
[1/2] ARM: dts: meson: build the Meson8b .dtbs with MACH_MESON8 - - - --- 2018-05-20 Martin Blumenstingl Accepted
[v2] clk: meson: meson8b: mark fclk_div2 gate clocks as CLK_IS_CRITICAL - - 1 --- 2018-05-20 Martin Blumenstingl Not Applicable
[v2,4/4] ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus - - - --- 2018-05-09 Martin Blumenstingl Accepted
[v2,3/4] ARM: dts: meson8: add the uart_A pins - - - --- 2018-05-09 Martin Blumenstingl Accepted
[v2,2/4] ARM: dts: meson: add support for the Meson8m2 SoC - - - --- 2018-05-09 Martin Blumenstingl Accepted
[v2,1/4] ARM: meson: add support for the Meson8m2 SoCs - - - --- 2018-05-09 Martin Blumenstingl Accepted
[2/2] ARM: dts: meson8b: odroid-c1: enable the IR receiver - - - --- 2018-05-06 Martin Blumenstingl Accepted
[1/2] ARM: dts: meson8b: odroid-c1: sort nodes alphabetically - - - --- 2018-05-06 Martin Blumenstingl Accepted
[6/6] ARM: dts: meson8m2: add support for the Tronsmart MXIII Plus - - - --- 2018-05-06 Martin Blumenstingl Accepted
[5/6] ARM: dts: meson8: add the uart_A pins - - - --- 2018-05-06 Martin Blumenstingl Accepted
[4/6] ARM: dts: meson: add support for the Meson8m2 SoC - - - --- 2018-05-06 Martin Blumenstingl Accepted
[3/6] ARM: meson: add support for the Meson8m2 SoCs - - - --- 2018-05-06 Martin Blumenstingl Accepted
[2/6] dt-bindings: arm: amlogic: add support for the Tronsmart MXIII Plus - 1 - --- 2018-05-06 Martin Blumenstingl Accepted
[1/6] dt-bindings: arm: amlogic: add support for the Meson8m2 SoC - 1 - --- 2018-05-06 Martin Blumenstingl Accepted
[1/1] ARM: dts: meson8b: RGMII doesn't use the eth_txd1_1 and eth_txd0_1 pins - - - --- 2018-05-01 Martin Blumenstingl Changes Requested
clk: meson: meson8b: mark fclk_div gate clocks as CLK_IS_CRITICAL - - 1 --- 2018-05-01 Martin Blumenstingl Not Applicable
pwm: meson: fix allocation of meson_pwm_channel array - - - --- 2018-04-28 Martin Blumenstingl Not Applicable
[meson-clk-next] clk: meson: meson8b: enable CLK_MESON_MPLL_ROUND_CLOSEST for all MPLLs - - - --- 2018-04-28 Martin Blumenstingl Not Applicable
[v4,2/2] clk: meson: meson8b: add support for the NAND clocks 1 - - --- 2018-04-23 Martin Blumenstingl Not Applicable
[v4,1/2] dt-bindings: clock: meson8b: export the NAND clock 1 - - --- 2018-04-23 Martin Blumenstingl Not Applicable
[clk-fixes] clk: meson: meson8b: fix meson8b_cpu_clk parent clock name - - - --- 2018-04-23 Martin Blumenstingl Not Applicable
[3/3] pinctrl: meson: meson8: add the RGMII RXD2/RXD3 and TXD2/TXD3 signals - - - --- 2018-04-22 Martin Blumenstingl Not Applicable
[2/3] pinctrl: meson: meson8: add support for the Meson8m2 SoC - - - --- 2018-04-22 Martin Blumenstingl Not Applicable
[1/3] dt-bindings: pinctrl: meson: add support for the Meson8m2 SoC - 1 - --- 2018-04-22 Martin Blumenstingl Not Applicable
[2/2] ARM: dts: meson8b: add the cortex-a5-pmu compatible PMU - - - --- 2018-04-22 Martin Blumenstingl Accepted
[1/2] ARM: dts: meson8: add the cortex-a9-pmu compatible PMU - - - --- 2018-04-22 Martin Blumenstingl Accepted
[2/2] ARM: multi_v7_defconfig: enable the Meson PWM controller - - - --- 2018-04-22 Martin Blumenstingl Accepted
[1/2] arm: multi_v7_defconfig: enable the Amlogic Meson I2C driver - - - --- 2018-04-22 Martin Blumenstingl Accepted
[v3,1/1] clk: meson: meson8b: add support for the NAND clocks 1 - - --- 2018-04-22 Martin Blumenstingl Not Applicable
[clk-fixes] clk: meson: meson8b: fix meson8b_fclk_div3_div clock name - 1 - --- 2018-04-22 Martin Blumenstingl Not Applicable
[usb,v6,6/6] usb: core: phy: add the SPDX-License-Identifier and include guard - - - --- 2018-04-18 Martin Blumenstingl Not Applicable
[usb,v6,5/6] usb: core: phy: add missing forward declaration for "struct device" - - - --- 2018-04-18 Martin Blumenstingl Not Applicable
[usb,v6,4/6] usb: core: phy: make it a no-op if CONFIG_GENERIC_PHY is disabled - - - --- 2018-04-18 Martin Blumenstingl Not Applicable
[usb,v6,3/6] usb: core: use phy_exit during suspend if wake up is not supported - 1 2 --- 2018-04-18 Martin Blumenstingl Not Applicable
[usb,v6,2/6] usb: core: split usb_phy_roothub_{init,alloc} - 1 2 --- 2018-04-18 Martin Blumenstingl Not Applicable
[usb,v6,1/6] usb: core: phy: fix return value of usb_phy_roothub_exit() - - 1 --- 2018-04-18 Martin Blumenstingl Not Applicable
[usb,v5,6/6] usb: core: phy: add the SPDX-License-Identifier and include guard - - - --- 2018-04-08 Martin Blumenstingl Not Applicable
[usb,v5,5/6] usb: core: phy: add missing forward declaration for "struct device" - - - --- 2018-04-08 Martin Blumenstingl Not Applicable
[usb,v5,4/6] usb: core: phy: make it a no-op if CONFIG_GENERIC_PHY is disabled - - - --- 2018-04-08 Martin Blumenstingl Not Applicable
[usb,v5,3/6] usb: core: use phy_exit during suspend if wake up is not supported - 1 1 --- 2018-04-08 Martin Blumenstingl Not Applicable
[usb,v5,2/6] usb: core: split usb_phy_roothub_{init,alloc} - 1 1 --- 2018-04-08 Martin Blumenstingl Not Applicable
[usb,v5,1/6] usb: core: phy: fix return value of usb_phy_roothub_exit() - - - --- 2018-04-08 Martin Blumenstingl Not Applicable
[net-next,v1,2/2] net: stmmac: dwmac-meson8b: Add support for the Meson8m2 SoC - - - --- 2018-03-29 Martin Blumenstingl Not Applicable
[net-next,v1,1/2] dt-bindings: net: meson-dwmac: add support for the Meson8m2 SoC - - - --- 2018-03-29 Martin Blumenstingl Not Applicable
[usb-next,v4,2/2] usb: core: use phy_exit during suspend if wake up is not supported - 1 1 --- 2018-03-27 Martin Blumenstingl Not Applicable
[usb-next,v4,1/2] usb: core: split usb_phy_roothub_{init, alloc} - 1 1 --- 2018-03-27 Martin Blumenstingl Not Applicable
[v2,7/7] ARM64: dts: meson-gxm-khadas-vim2: enable the USB controller - - - --- 2018-03-26 Martin Blumenstingl Accepted
[v2,6/7] ARM64: dts: meson-gxl-nexbox-a95x: enable the USB controller - - - --- 2018-03-26 Martin Blumenstingl Accepted
« 1 2 ... 6 7 8 … 12 13 »